2,833 research outputs found

    Post-seismic and interseismic fault creep I: model description

    Get PDF
    We present a model of localized, aseismic fault creep during the full interseismic period, including both transient and steady fault creep, in response to a sequence of imposed coseismic slip events and tectonic loading. We consider the behaviour of models with linear viscous, non-linear viscous, rate-dependent friction, and rate- and state-dependent friction fault rheologies. Both the transient post-seismic creep and the pattern of steady interseismic creep rates surrounding asperities depend on recent coseismic slip and fault rheologies. In these models, post-seismic fault creep is manifest as pulses of elevated creep rates that propagate from the coseismic slip, these pulses feature sharper fronts and are longer lived in models with rate-state friction compared to other models. With small characteristic slip distances in rate-state friction models, interseismic creep is similar to that in models with rate-dependent friction faults, except for the earliest periods of post-seismic creep. Our model can be used to constrain fault rheologies from geodetic observations in cases where the coseismic slip history is relatively well known. When only considering surface deformation over a short period of time, there are strong trade-offs between fault rheology and the details of the imposed coseismic slip. Geodetic observations over longer times following an earthquake will reduce these trade-offs, while simultaneous modelling of interseismic and post-seismic observations provide the strongest constraints on fault rheologies

    Heavy rain effects on airplane performance

    Get PDF
    The objective is to determine if the aerodynamic characteristics of an airplane are altered while flying in the rain. Wind-tunnel tests conducted at the NASA Langley Research Center (LaRC) have shown losses in maximum lift, reduction in stall angle, and increases in drag when a wing is placed in a simulated rain spray. For these tests the water spray concentration used represented a very heavy rainfall. A lack of definition of the scaling laws for aerodynamic testing in a two-phase, two-component flow makes interpolation of the wind-tunnel test uncertain. Tests of a large-scale wing are to be conducted at the LaRC. The large-scale wing is mounted on top of the Aircraft Landing Dynamics Facility (ALDF) carriage. This carriage (which is 70-foot long, 30-foot wide, and 30-foot high) is propelled with the wing model attached down a 3000-foot long test track by a water jet at speeds of up to 170 knots. A simulated rain spray system has been installed along 500 feet of the test track and can simulate rain falls from 2 to 40 inches/hour. Operational checks are underway and the initial tests should be completed by the Fall of 1989

    GaAs solar cells for laser power beaming

    Get PDF
    Efforts to develop GaAs solar cells for coupling to laser beams in the wavelength range of 800 to 840 nm are described. This work was motivated primarily by interests in space-tp-space power beaming applications. In particular, the Battelle Pacific Northwest Laboratories is conducting studies of the utilization of power beaming for several future space missions. Modeling calculations of GaAs cell performance were carried out using PC-1D to determine an appropriate design for a p/n cell structure. Epitaxial wafers were grown by MOCVD and cells fabricated at WSU Tri-Cities. Under simulated conditions, an efficiency of 53 percent was achieved for a cell coupled to 806 nm light at 400 mW/sq cm

    Evidence For Ecological Character Displacement In Western American Catostomid Fishes

    Full text link
    Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/137612/1/evo04742.pd

    The relationship between physical ill-health and mental ill-health in adults with intellectual disabilities

    Get PDF
    Background: People with intellectual disabilities face a much greater burden and earlier onset of physical and mental ill‐health than the general adult population. Physical–mental comorbidity has been shown to result in poorer outcomes in the general population, but little is known about this relationship in adults with intellectual disabilities. Aims: To identify whether physical ill‐health is associated with mental ill‐health in adults with intellectual disabilities and whether the extent of physical multi‐morbidity can predict the likelihood of mental ill‐health. To identify any associations between types of physical ill‐health and mental ill‐health. Method: A total of 1023 adults with intellectual disabilities underwent comprehensive health assessments. Binary logistic regressions were undertaken to establish any association between the independent variables: total number of physical health conditions, physical conditions by International Classification of Disease‐10 chapter and specific physical health conditions; and the dependent variables: problem behaviours, mental disorders of any type. All regressions were adjusted for age, gender, level of intellectual disabilities, living arrangements, neighbourhood deprivation and Down syndrome. Results: The extent of physical multi‐morbidity was not associated with mental ill‐health in adults with intellectual disabilities as only 0.8% of the sample had no physical conditions. Endocrine disease increased the risk of problem behaviours [odds ratio (OR): 1.22, 95% confidence interval (CI): 1.02–1.47], respiratory disease reduced the risk of problem behaviours (OR: 0.73, 95% CI: 0.54–0.99) and mental ill‐health of any type (OR: 0.73, 95% CI: 0.58–0.92), and musculoskeletal disease reduced the risk of mental ill‐health of any type (OR: 0.84, 95% CI: 0.73–0.98). Ischaemic heart disease increased the risk of problem behaviours approximately threefold (OR: 3.29, 95% CI: 1.02–10.60). Conclusions: The extent of physical multi‐morbidity in the population with intellectual disabilities is overwhelming, such that associations are not found with mental ill‐health. Mental health interventions and preventative measures are essential for the entire population with intellectual disabilities and should not be focussed on subgroups based on overall health burden

    Finite difference modelling of rupture propagation with strong velocity-weakening friction

    Get PDF
    We incorporate rate- and state-dependent friction in explicit finite difference (FD) simulations of mode II dynamic ruptures in elastic media, using the Mimetic Operators Split-Node (MOSN) method, with adjustable order of spatial accuracy (second-, fourth- or mixed-order accurate), including an option that is fourth-order accurate at the fault discontinuity as well as in the elastic volume. At fault points, the rate and state equations combined with the spatially discretized momentum conservation equations form a coupled system of ordinary differential equations (ODEs) for slip velocity and state variable. As a consequence of the rapid damping of velocity perturbations due to the direct effect, this system exhibits numerical stiffness that is inversely proportional to velocity squared. Approximate solutions to this velocity-state system are achieved by two different implicit schemes: (i) a fourth-order Rosenbrock integration of the full system using multiple substeps and (ii) low order integrations (backward Euler and trapezoidal) of the velocity equation, time-staggered with analytic integration of the state equation under the approximation of constant slip velocity over the time step. In assessing the numerical schemes, we use three test problems: ruptures with frictional resistance controlled by (i) a slip evolution law with strong velocity-weakening behaviour at high slip rates, representing thermal weakening due to flash heating of microscopic asperity contacts, (ii) the classic (low-velocity) slip evolution law and (iii) the classic aging evolution law. A convergence analysis is carried out using reference solutions from a spectral boundary integral equation method (BIEM) (a method restricted to homogeneous media, with nominal spectral accuracy in space and second-order accuracy in time for smooth solutions). Errors are measured by root-mean-square differences of fault-plane time histories (slip, slip rate, traction and state). MOSN shows essentially the same convergence rates as BIEM: second-order convergence for slip and state-variable misfits, with slower (but at least first-order) convergence for slip rates and tractions. For a given grid spacing, fourth-order MOSN is as accurate as BIEM for all variables except slip-rate. MOSN-Rosenbrock nominally has fourth-order temporal accuracy for the fault-plane velocity-state ODE integration (compared to lower-order accuracy for the other two MOSN schemes) and therefore provides an important theoretical benchmark. However, it is sensitive to details of the elastic calculation scheme and occasionally its adaptive substepping performs poorly, leading to large excursions from the reference solution. In contrast, MOSN-trapezoidal is robust and reliable, much easier to implement than MOSN-Rosenbrock, and in all cases achieves precision as good as the latter without recourse to substepping. MOSN-Euler has the same advantages as MOSN-trapezoidal, except that its nominal first-order temporal accuracy ultimately leads to larger errors in slip and state variable compared with the higher-order MOSN schemes at sufficiently small grid spacings and time step

    The enigmatic core L1451-mm: a first hydrostatic core? or a hidden VeLLO?

    Full text link
    We present the detection of a dust continuum source at 3-mm (CARMA) and 1.3-mm (SMA), and 12CO(2-1) emission (SMA) towards the L1451-mm dense core. These detections suggest a compact object and an outflow where no point source at mid-infrared wavelengths is detected using Spitzer. An upper limit for the dense core bolometric luminosity of 0.05 Lsun is obtained. By modeling the broadband SED and the continuum interferometric visibilities simultaneously, we confirm that a central source of heating is needed to explain the observations. This modeling also shows that the data can be well fitted by a dense core with a YSO and disk, or by a dense core with a central First Hydrostatic Core (FHSC). Unfortunately, we are not able to decide between these two models, which produce similar fits. We also detect 12CO(2-1) emission with red- and blue-shifted emission suggesting the presence of a slow and poorly collimated outflow, in opposition to what is usually found towards young stellar objects but in agreement with prediction from simulations of a FHSC. This presents the best candidate, so far, for a FHSC, an object that has been identified in simulations of collapsing dense cores. Whatever the true nature of the central object in L1451-mm, this core presents an excellent laboratory to study the earliest phases of low-mass star formation.Comment: 15 pages, 9 figures, emulateapj. Accepted by Ap

    Symbolic Manipulators Affect Mathematical Mindsets

    Full text link
    Symbolic calculators like Mathematica are becoming more commonplace among upper level physics students. The presence of such a powerful calculator can couple strongly to the type of mathematical reasoning students employ. It does not merely offer a convenient way to perform the computations students would have otherwise wanted to do by hand. This paper presents examples from the work of upper level physics majors where Mathematica plays an active role in focusing and sustaining their thought around calculation. These students still engage in powerful mathematical reasoning while they calculate but struggle because of the narrowed breadth of their thinking. Their reasoning is drawn into local attractors where they look to calculation schemes to resolve questions instead of, for example, mapping the mathematics to the physical system at hand. We model the influence of Mathematica as an integral part of the constant feedback that occurs in how students frame, and hence focus, their work
    corecore