Economic evaluations of onchocerciasis interventions: a systematic review and research needs

Objective To provide a systematic review of economic evaluations that has been conducted for onchocerciasis interventions, to summarise current key knowledge and to identify research gaps. Method A systematic review of the literature was conducted on the 8th of August 2018 using the PubMed (MEDLINE) and ISI Web of Science electronic databases. No date or language stipulations were applied to the searches. Results We identified 14 primary studies reporting the results of economic evaluations of onchocerciasis interventions, seven of which were cost‐effectiveness analyses. The studies identified used a variety of different approaches to estimate the costs of the investigated interventions/programmes. Originally, the studies only quantified the benefits associated with preventing blindness. Gradually, methods improved and also captured onchocerciasis‐associated skin disease. Studies found that eliminating onchocerciasis would generate billions in economic benefits. The majority of the cost‐effectiveness analyses evaluated annual mass drug administration (MDA). The estimated cost per disability‐adjusted life year (DALY) averted of annual MDA varies between US$3 and US$30 (cost year variable). Conclusions The cost benefit and cost effectiveness of onchocerciasis interventions have consistently been found to be very favourable. This finding provides strong evidential support for the ongoing efforts to eliminate onchocerciasis from endemic areas. Although these results are very promising, there are several important research gaps that need to be addressed as we move towards the 2020 milestones and beyond

The antiinflammatory potential of phenolic compounds from Emblica officinalis L. in rat

Antiinflammatory effects of phenolic compounds from Emblica officinalis were evaluated in carrageenan and cotton pellet induced acute and chronic inflammatory animal model. Fractions of E. officinalis containing free (FPEO) and bounded (BPEO) phenolic compounds were assessed by HPLC technique. The free and bound phenolic compounds were studied for their acute and chronic antiinflammatory activity at dose level of 20 and 40 mg/kg. The carrageenan induced acute inflammation was assessed by measuring rat paw volume at different time of intervals. Further, cotton pellet induced chronic inflammation was assessed by granulomatous tissue mass estimation along with the estimation of tissue biomarker changes (i.e. lipid peroxidation, reduced glutathione, myeloperoxidase and plasma extravasation). The results indicated that in both acute and chronic inflammation, FPEO and BPEO show reduction in the inflammation, but significant effects was observed only at high doses of both fractions which was comparable to diclofenac treated group. In conclusion, phenolic compounds of E. officinalis may serve as potential herbal candidate for amelioration of acute and chronic inflammation due to their modulatory action of free radicals

Determinants of seasonal influenza vaccination in pregnant women in Valencia, Spain

Background: In most countries the coverage of seasonal influenza vaccination in pregnant women is low. We investigated the acceptance, reasons for rejection and professional involvement related to vaccine information in pregnant women in Valencia, Spain. Methods: Observational retrospective study in 200 pregnant women, 100 vaccinated and 100 unvaccinated, were interviewed during the 2014/2015 vaccination campaign. Electronic medical records, immunization registry and telephone interviews were used to determine reasons for vaccination and immunization rejection. Results: 40.5% of pregnant women in the health department were vaccinated. The midwife was identified as source of information for 89% of women. The vaccine was rejected due to low perceptions of risk of influenza infection (23%), lack of information (19%), considering the vaccine as superfluous (16%), close proximity of delivery date (13%) and fear of side effects (12%). Conclusion: Pregnant women in Spain declined to be vaccinated due to under-estimation of the risk of contracting or being harmed by influenza, and lack of information. Interventions aiming to optimize vaccination coverage should include information addressing the safety and effectiveness of the current vaccine together with improved professional training and motivation

Experience developing national evidence-based clinical guidelines for childhood pneumonia in a low-income setting - making the GRADE?

BACKGROUND: The development of evidence-based clinical practice guidelines has gained wide acceptance in high-income countries and reputable international organizations. Whereas this approach may be a desirable standard, challenges remain in low-income settings with limited capacity and resources for evidence synthesis and guideline development. We present our experience using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach for the recent revision of the Kenyan pediatric clinical guidelines focusing on antibiotic treatment of pneumonia. METHODS: A team of health professionals, many with minimal prior experience conducting systematic reviews, carried out evidence synthesis for structured clinical questions. Summaries were compiled and distributed to a panel of clinicians, academicians and policy-makers to generate recommendations based on best available research evidence and locally-relevant contextual factors. RESULTS: We reviewed six eligible articles on non-severe and 13 on severe/very severe pneumonia. Moderate quality evidence suggesting similar clinical outcomes comparing amoxicillin and cotrimoxazole for non-severe pneumonia received a strong recommendation against adopting amoxicillin. The panel voted strongly against amoxicillin for severe pneumonia over benzyl penicillin despite moderate quality evidence suggesting clinical equivalence between the two and additional factors favoring amoxicillin. Very low quality evidence suggesting ceftriaxone was as effective as the standard benzyl penicillin plus gentamicin for very severe pneumonia received a strong recommendation supporting the standard treatment. CONCLUSIONS: Although this exercise may have fallen short of the rigorous requirements recommended by the developers of GRADE, it was arguably an improvement on previous attempts at guideline development in low-income countries and offers valuable lessons for future similar exercises where resources and locally-generated evidence are scarce

Abnormal motor activity during anaesthesia in a dog: a case report

Seizures or convulsions that occur during anaesthesia in veterinary patients are infrequently reported in the literature. Consequently, the incidence of such events is unknown. Several drugs commonly used in clinical veterinary anaesthesia have been shown to induce epileptiform activity in both human clinical patients and experimental candidates. The present case report describes convulsions in a four-year old male Bernese mountain dog during maintenance of anaesthesia with isoflurane after premedication with acepromazine and methadone followed by co-induction with propofol and ketamine. The dog had no history of previous convulsions. The use of several sedative and anaesthetic drugs makes it difficult to find one single causative pharmaceutical

Changes in Inflammatory Response after Endovascular Treatment for Type B Aortic Dissection

This present study aims to investigate the changes in the inflammatory markers after elective endovascular treatment of Type B aortic dissection with aneurysm, as related to different anatomical features of the dissection flap in the paravisceral perfusion. Consecutive patients with type B aortic dissections with elective endovascular stent graft repair were recruited and categorized into different groups. Serial plasma levels of cytokines (Interleukin-1β, -6, -8, -10, TNF-α), chemokines (MCP-1), and serum creatinine were monitored at pre-, peri- and post-operative stages. The length of stent graft employed in each surgery was retrieved and correlated with the change of all studied biochemical parameters. A control group of aortic dissected patients with conventional medication management was recruited for comparing the baseline biochemical parameters. In total, 22 endovascular treated and 16 aortic dissected patients with surveillance were recruited. The endovascular treated patients had comparable baseline levels as the non-surgical patients. There was no immediate or thirty day-mortality, and none of the surgical patients developed post-operative mesenteric ischaemia or clinically significant renal impairment. All surgical patients had detectable pro-inflammatory mediators, but none of the them showed any statistical significant surge in the peri-operative period except IL-1β and IL-6. Similar results were obtained when categorized into different groups. IL-1β and IL-6 showed maximal levels within hours of the endovascular procedure (range, 3.93 to 27.3 higher than baseline; p = 0.001), but returned to baseline 1 day post-operatively. The change of IL-1β and IL-6 at the stent graft deployment was statistically greater in longer stent graft (p>0.05). No significant changes were observed in the serum creatinine levels. In conclusion, elective endovascular repair of type B aortic dissection associated with insignificant changes in inflammatory mediators and creatinine. All levels fell toward basal levels post-operatively suggesting that thoracic endovascular aortic repair is rather less aggressive with insignificant inflammatory modulation

Computational investigation of diesel nozzle internal flow during the complete injection event

[EN] Currently, diesel engines are calibrated using more and more complex multiple injection strategies. Under these conditions, the characteristics of the flow exiting the fuel injector are strongly affected by the transient interaction between the needle, the sac volume and the orifices, which are not yet clear. In the current paper, a methodology combining a 1D injector model and 3D-CFD simulations is proposed. First, the characteristics of the nozzle flow have been experimentally assessed in transient conditions by means of injection rate and momentum flux measurements. Later, the 3D-CFD modeling approach has been validated at steady-state fixed lift conditions. Finally, a previously developed 1D injector model has been used to extract the needle lift profiles and transient pressure boundary conditions used for the full-transient 3D-CFD simulations, using adaptive mesh refinement (AMR) strategies to be able to simulate the complete injection rate starting from 1 mu m lift.This work was partly sponsored by "Ministerio de Economia y Competitividad'', of the Spanish Government, in the frame of the Project "Estudio de la interaccion chorro-pared en condiciones realistas de motor'', Reference TRA2015-67679-c2-1-R. The authors would like also to thank the computer resources, technical expertise and assistance provided by Universidad de Valencia in the use of the supercomputer "Tirant''. Mr. Jaramillo's Thesis is funded by "Conselleria d'Educacio, Cultura i Esports'' of Generalitat Valenciana in the frame of the program "Programa VALI + D para investigadores en formacion, Reference ACIF/2015/040.Salvador, FJ.; De La Morena, J.; Bracho Leon, G.; Jaramillo-Císcar, D. (2018). Computational investigation of diesel nozzle internal flow during the complete injection event. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40(3):153-167. https://doi.org/10.1007/s40430-018-1074-zS153167403Hall CAS, Lambert JG, Balogh SB (2014) EROI of different fuels and the implications for society. Energy Policy 64:141–152. https://doi.org/10.1016/j.enpol.2013.05.049Lujan JM, Tormos B, Salvador FJ, Gargar K (2009) Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: preliminary study (I). Biomass Bioenergy 33:941–947. https://doi.org/10.1016/j.biombioe.2009.02.004Pickett LM, Siebers DL (2004) Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure. Combust Flame 138:114–135. https://doi.org/10.1016/j.combustflame.2004.04.006Dec JE (1997) A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging. SAE Tech. Pap. 970873Wang X, Huang Z, Zhang W et al (2011) Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray. Appl Energy 88:1620–1628. https://doi.org/10.1016/j.apenergy.2010.11.035Sayin C, Gumus M, Canakci M (2013) Influence of injector hole number on the performance and emissions of a di diesel engine fueled with biodiesel-diesel fuel blends. Appl Therm Eng 61:121–128. https://doi.org/10.1016/j.applthermaleng.2013.07.038Mohan B, Yang W, Chou SK (2013) Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review. Renew Sustain Energy Rev 28:664–676. https://doi.org/10.1016/j.rser.2013.08.051Payri R, Salvador FJ, Gimeno J, De la Morena J (2011) Influence of injector technology on injection and combustion development, Part 1: hydraulic characterization. Appl Energy 88:1068–1074. https://doi.org/10.1016/j.apenergy.2010.10.012Park SW, Kim JW, Lee CS (2006) Effect of injector type on fuel-air mixture formation of high-speed diesel sprays. Proc Inst Mech Eng D 220:647–659. https://doi.org/10.1243/09544070D20304Moon S, Komada K, Sato K et al (2015) Ultrafast X-ray study of multi-hole GDI injector sprays: effects of nozzle hole length and number on initial spray formation. Exp Therm Fluid Sci 68:68–81. https://doi.org/10.1016/j.expthermflusci.2015.03.027Powell CF, Kastengren AL, Liu Z, Fezzaa K (2010) The effects of diesel injector needle motion on spray structure. J Eng Gas Turbines Power 133:12802. https://doi.org/10.1115/1.4001073Huang W, Moon S, Ohsawa K (2016) Near-nozzle dynamics of diesel spray under varied needle lifts and its prediction using analytical model. Fuel 180:292–300. https://doi.org/10.1016/j.fuel.2016.04.042Sun Z-Y, Li G-X, Chen C et al (2015) Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine. Energy Convers Manag 89:843–861. https://doi.org/10.1016/j.enconman.2014.10.047Devassy BM, Habchi C, Daniel E (2015) Atomization modelling of liquid jets using a two-surface density approach. At Sprays 25:47–80Moon S, Gao Y, Park S et al (2015) Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection. Fuel 150:112–122. https://doi.org/10.1016/j.fuel.2015.01.097Payri R, Salvador FJ, Carreres M, De la Morena J (2016) Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis. Energy Convers Manag 114:376–391. https://doi.org/10.1016/j.enconman.2016.02.043Plamondon E, Seers P (2014) Development of a simplified dynamic model for a piezoelectric injector using multiple injection strategies with biodiesel/diesel-fuel blends. Appl Energy 131:411–424. https://doi.org/10.1016/j.apenergy.2014.06.039Postrioti L, Malaguti S, Bosi M et al (2014) Experimental and numerical characterization of a direct solenoid actuation injector for diesel engine applications. Fuel 118:316–328. https://doi.org/10.1016/j.fuel.2013.11.001Desantes JM, Salvador FJ, Lopez JJ, De la Morena J (2011) Study of mass and momentum transfer in diesel sprays based on X-ray mass distribution measurements and on a theoretical derivation. Exp Fluids 50:233–246. https://doi.org/10.1007/s00348-010-0919-8De la Morena J, Neroorkar K, Plazas AH et al (2013) Numerical analysis of the influence of diesel nozzle design on internal flow characteristics for 2-valve diesel engine application. At Sprays 23:97–118. https://doi.org/10.1615/AtomizSpr.2013006361Duke DJ, Schmidt DP, Neroorkar K et al (2013) High-resolution large eddy simulations of cavitating gasoline-ethanol blends. Int J Engine Res 14:578–589. https://doi.org/10.1177/1468087413501824Mitroglou N, McLorn M, Gavaises M et al (2014) Instantaneous and ensemble average cavitation structures in diesel micro-channel flow orifices. Fuel 116:736–742. https://doi.org/10.1016/j.fuel.2013.08.060Wang X, Li K, Su W (2012) Experimental and numerical investigations on internal flow characteristics of diesel nozzle under real fuel injection conditions. Exp Therm Fluid Sci 42:204–211. https://doi.org/10.1016/j.expthermflusci.2012.04.022Sou A, Pratama RH (2016) Effects of asymmetric inflow on cavitation in fuel injector and discharged liquid jet. At Sprays 26:939–959. https://doi.org/10.1615/AtomizSpr.2015013501Xue Q, Battistoni M, Powell CF et al (2015) An Eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines. Int J Multiph Flow 70:77–88. https://doi.org/10.1016/j.ijmultiphaseflow.2014.11.012Castilla R, Gamez-Montero PJ, Ertrk N et al (2010) Numerical simulation of turbulent flow in the suction chamber of a gearpump using deforming mesh and mesh replacement. Int J Mech Sci 52:1334–1342. https://doi.org/10.1016/j.ijmecsci.2010.06.009Parlak Z, Engin T (2012) Time-dependent CFD and quasi-static analysis of magnetorheological fluid dampers with experimental validation. Int J Mech Sci 64:22–31. https://doi.org/10.1016/j.ijmecsci.2012.08.006Chiatti G, Chiavola O, Palmieri F (2009) Spray modeling for diesel engine performance analysis. SAE Tech Pap 2009-01-0835. https://doi.org/10.4271/2009-01-0835Marcer R, Audiffren C, Viel A, et al (2010) Coupling 1D system AMESim and 3D CFD EOLE models for diesel injection simulation Renault. In: ILASS—Eur. 2010, 23rd Annu. Conf. Liq. At. Spray Syst., pp 1–10Desantes JM, Salvador FJ, Carreres M, Martínez-López J (2014) Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles. Proc Inst Mech Eng D 229:407–423. https://doi.org/10.1177/0954407014542627Battistoni M, Xue Q, Som S (2016) Large-eddy simulation (LES) of spray transients: start and end of injection phenomena. Oil Gas Sci Technol 71:24. https://doi.org/10.2516/ogst/2015024CONVERGE is a trade mark of convergent science. https://convergecfd.comMacian V, Bermúdez V, Payri R, Gimeno J (2003) New technique for determination of internal geometry of a diesel nozzle with the use of silicone methodology. Exp Tech 27:39–43. https://doi.org/10.1111/j.1747-1567.2003.tb00107.xDabiri S, Sirignano WA, Joseph DD (2007) Cavitation in an orifice flow. Phys Fluids 19:72112. https://doi.org/10.1063/1.2750655Mohan B, Yang W, Chou SK (2014) Cavitation in injector nozzle holes—a parametric study. Eng Appl Comput Fluid Mech 8:70–81Salvador FJ, Hoyas S, Novella R, Martinez-Lopez J (2011) Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles. Proc Inst Mech Eng D 225:545–563. https://doi.org/10.1177/09544070JAUTO1569Som S, Longman DE, Ramirez AI, Aggarwal S (2012) Influence of nozzle orifice geometry and fuel properties on flow and cavitation characteristics of a diesel injector. In: Fuel Inject. Automot. Eng., pp 112–126Desantes JM, Salvador FJ, Carreres M, Jaramillo D (2015) Experimental characterization of the thermodynamic properties of diesel fuels over a wide range of pressures and temperatures. SAE Int J Fuels Lubr 8:2015-01-0951. https://doi.org/10.4271/2015-01-0951Bosch W (1966) The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection. SAE Pap. 660749Payri R, Salvador FJ, Gimeno J, Bracho G (2008) A new methodology for correcting the signal cumulative phenomenon on injection rate measurements. Exp Tech 32:46–49. https://doi.org/10.1111/j.1747-1567.2007.00188.xPayri F, Payri R, Salvador FJ, Martínez-López J (2011) A contribution to the understanding of cavitation effects in diesel injector nozzles through a combined experimental and computational investigation. Comput Fluids 58:88–101. https://doi.org/10.1016/j.compfluid.2012.01.005Lichtarowicz AK, Duggins RK, Markland E (1965) Discharge coefficients for incompressible non-cavitating flow through long orifices. J Mech Eng Sci 7:210–219. https://doi.org/10.1243/JMES_JOUR_1965_007_029_02Lopez JJ, Salvador FJ, De la Garza OA, Arrègle J (2012) Characterization of the pressure losses in a common rail diesel injector. Proc Inst Mech Eng D 226:1697–1706. https://doi.org/10.1177/0954407012447020Salvador FJ, Carreres M, Jaramillo D, Martínez-López J (2015) Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics. Energy Convers Manag 103:284–299. https://doi.org/10.1016/j.enconman.2015.05.062LMS (2010) Imagine.Lab AMESim v.10. User’s manualPayri R, Salvador FJ, Martí-Aldaraví P, Martínez-López J (2012) Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: detailed injection system model. Energy Convers Manag 54:90–99. https://doi.org/10.1016/j.enconman.2011.10.00

Prevalence and predictors of 6-month exclusive breastfeeding among Canadian women: a national survey

<p>Abstract</p> <p>Background</p> <p>In spite of the evidence supporting the importance of breastfeeding during the first year of life, data on breastfeeding practices remain limited in Canada. The study aimed to examine the prevalence and predictors of 6-month exclusive breastfeeding among Canadian women.</p> <p>Methods</p> <p>The analysis was based on the Maternity Experience Survey targeting women aged ≥ 15 years who had singleton live births between February 2006 - May 2006 in the Canadian provinces and November 2005 - February 2006 in the territories. The main outcome was exclusive breastfeeding based on the World Health Organization definition. Socioeconomic, demographic, maternal, pregnancy and delivery related variables were considered for a multivariate logistic regression using stepwise modeling. Bootstrapping was performed to account for the complex sampling design.</p> <p>Results</p> <p>The sample size in this study was 5,615 weighted to represent 66,810 Canadian women. While ever breastfeeding was 90.3%, the 6-month exclusive breastfeeding rate was 13.8%. Based on the regression model, having higher years of education, residing in the Northern territories and Western provinces, living with a partner, having had previous pregnancies, having lower pre-pregnancy body mass index and giving birth at older age were associated with increased likelihood of 6-month exclusive breastfeeding. Moreover, smoking during pregnancy, Caesarean birth, infant's admission to the intensive care unit and maternal employment status before 6 months of infant's age were negatively associated with exclusive breastfeeding. Mothers choosing to deliver at home were more likely to remain exclusively breastfeeding for 6 months (Odds Ratio: 5.29, 95% Confidence Interval: 2.95-9.46).</p> <p>Conclusions</p> <p>The 6-month exclusive breastfeeding rate is low in Canada. The study results constitute the basis for designing interventions that aim to bridge the gap between the current practices of breastfeeding and the World Health Organization recommendation.</p