The effects of inlet turbulence and rotor/stator interactions on the aerodynamics and heat transfer of a large-scale rotating turbine model. Volume 3: Heat transfer data tabulation 65 percent axial spacing

This is Volume 3 - Heat Transfer Data Tabulation (65 percent Axial Spacing) of a combined experimental and analytical program which was conducted to examine the effects of inlet turbulence on airfoil heat transfer. The experimental portion of the study was conducted in a large-scale (approximately 5X engine), ambient temperature, rotating turbine model configured in both single stage and stage-and-a-half arrangements. Heat transfer measurements were obtained using low-conductivity airfoils with miniature thermocouples welded to a thin, electrically heated surface skin. Heat transfer data were acquired for various combinations of low or high inlet turbulence intensity, flow coefficient, first-stator/rotor axial spacing, Reynolds number and relative circumferential position of the first and second stators

The effects of inlet turbulence and rotor/stator interactions on the aerodynamics and heat transfer of a large-scale rotating turbine model. Part 4: Aerodynamic data tabulation

A combined experimental and analytical program was conducted to examine the effects of inlet turbulence and airfoil heat transfer. The experimental portion of the study was conducted in a large-scale (approx. 5X engine), ambient temperature, rotating turbine model configured in both single-stage and stage-and-a-half arrangements. Heat transfer measurements were obtained using low-conductivity airfoils with miniature thermocouples welded to a thin, electrically heated surface skin. Heat transfer data were acquired for various combinations of low or high inlet turbulence intensity, flow coefficient, first stator-rotor axial spacing, Reynolds number and relative circumferential position of the first and second stators. Aerodynamic measurements obtained include distributions of the mean and fluctuating velocities at the turbine inlet and, for each airfoil row, midspan airfoil surface pressures and circumferential distributions of the downstream steady state pressures and fluctuating velocities. Results include airfoil heat transfer predictions produced using existing 2-D boundary layer computation schemes and an examination of solutions of the unsteady boundary layer equations

Axial compressor middle stage secondary flow study

This report describes an experimental investigation of the secondary flow within and aft of an axial compressor model with thick endwall boundary layers. The objective of the study was to obtain detailed aerodynamic and trace gas concentration traverse data aft of a well documented isolated rotor for the ultimate purpose of improving the design phases of compressor development based on an improved physical understanding of secondary flow. It was determined from the flow visualization, aerodynamic, and trace gas concentration results that the relative unloading of the midspan region of the airfoil inhibitied a fullspan separation at high loading preventing the massive radial displacement of the hub corner stall to the tip. Radial distribution of high and low total pressure fluid influenced the magnitude of the spanwise distribution of loss, such that, there was a general decreases in loss near the hub to the extent that for the least loaded case a negative loss (increase in total pressure) was observed. The ability to determine the spanwise distribution of blockage was demonstrated. Large blockage was present in the endwall regions due to the corner stall and tip leakage with little blockage in the core flow region. Hub blockage was found to increase rapidly with loading

The effects of inlet turbulence and rotor/stator interactions on the aerodynamics and heat transfer of a large-scale rotating turbine model. Volume 2: Heat transfer data tabulation. 15 percent axial spacing

A combined experimental and analytical program was conducted to examine the effects of inlet turbulence on airfoil heat transfer. The experimental portion of the study was conducted in a large-scale (approx 5X engine), ambient temperature, rotating turbine model configured in both single stage and stage-and-a-half arrangements. Heat transfer measurements were obtained using low-conductivity airfoils with miniature thermcouples welded to a thin, electrically heated surface skin. Heat transfer data were acquired for various combinations of low or high inlet turbulence intensity, flow coefficient, first-stator/rotor axial spacing, Reynolds number and relative circumferential position of the first and second stators. Aerodynamic measurements obtained as part of the program include distributions of the mean and fluctuating velocities at the turbine inlet and, for each airfoil row, midspan airfoil surface pressures and circumferential distributions of the downstream steady state pressures and fluctuating velocities. Analytical results include airfoil heat transfer predictions produced using existing 2-D boundary layer computation schemes and an examination of solutions of the unsteady boundary layer equations. The results are reported in four separate volumes, of which this is Volume 2: Heat Transfer Data Tabulation; 15 Percent Axial Spacing

Modulation of constitutive androstane receptor (CAR) and pregnane X receptor (PXR) by 6-arylpyrrolo[2,1-d][1,5]benzothiazepine derivatives, ligands of peripheral benzodiazepine receptor (PBR)

Constitutive androstane receptor (CAR) and pregnane X receptor (PXR) regulate xenobiotic sensing and metabolism through interactions with multiple exogenous and endogenous chemicals. Compounds that activate CAR are often ligands of PXR; attention is therefore given to discovery of new, receptor-specific chemical entities that may be exploited for therapeutic and basic research purposes. Recently, ligands of the peripheral benzodiazepine receptor (PBR), PK11195 and FGIN-1-27, were shown to modulate both CAR and PXR. PBR is a mitochondrial transport protein responsible for multiple regulatory functions, including heme biosynthesis, a major component in cytochrome P450 (CYP) enzymes. To investigate possible new roles for PBR involvement in metabolic regulation, expression of the CAR and PXR target genes, CYP2B6 and CYP3A4, was measured in human hepatocytes following treatment with a targeted PBR ligand set. Luciferase reporter assays with transiently expressed wild-type CAR (CAR1), splice variant CAR3, or PXR in HuH-7 cells were used to further study activation of these receptors. Four structurally related PBR ligands (benzothiazepines) differentially modulate CAR1, CAR3 and PXR activity. Benzothiazepine NF49 is an agonist ligand of CAR3, a partial agonist of PXR, exhibits greater inverse agonist activity on CAR1 than does PK11195, and is a new tool for studying these closely related nuclear receptors

Tidal amplification of seabed light

Because solar irradiance decreases approximately exponentially with depth in the sea, the increase in irradiance at the seabed from mid to low tide is greater than the decrease from mid to high tide. Summed over a day, this can lead to a net amplification of seabed irradiance in tidal waters compared to nontidal waters with the same mean depth and transparency. In this paper, this effect is quantified by numerical and analytical integration of the Lambert-Beer equation to derive the ratio of daily total seabed irradiance with and without a tide. Greatest amplification occurs in turbid water with large tidal range and low tide occurring at noon. The theoretical prediction is tested against observations of seabed irradiance in the coastal waters of North Wales where tidal amplification of seabed light by up to a factor of 7 is both observed and predicted. Increasing the strength of tidal currents tends to increase the turbidity of the water and hence reduce the light reaching the seabed, but this effect is made less by increasing tidal amplification, especially when low water is in the middle of the day. The ecological implications of tidal amplification are discussed. The productivity of benthic algae will be greater than that predicted by simple models which calculate seabed irradiance using the mean depth of water alone. Benthic algae are also able to live at greater depths in tidal waters than in nontidal waters with the same transparency

Towards an equity competency model for sustainable food systems education programs

Addressing social inequities has been recognized as foundational to transforming food systems. Activists and scholars have critiqued food movements as lacking an orientation towards addressing issues of social justice. To address issues of inequity, sustainable food systems education (SFSE) programs will have to increase students’ equity-related capabilities. Our first objective in this paper is to determine the extent to which SFSE programs in the USA and Canada address equity. We identified 108 programs and reviewed their public facing documents for an explicit focus on equity. We found that roughly 80% of universities with SFSE programs do not provide evidence that they explicitly include equity in their curricula. Our second objective is to propose an equity competency model based on literature from multiple fields and perspectives. This entails dimensions related to knowledge of self; knowledge of others and one’s interactions with them; knowledge of systems of oppression and inequities; and the drive to embrace and create strategies and tactics for dismantling racism and other forms of inequity. Integrating our equity competency model into SFSE curricula can support the development of future professionals capable of dismantling inequity in the food system. We understand that to integrate an equity competency in our curricula will require commitment to build will and skill not only of our students, but our faculty, and entire university communities

The Dissipation of Heat by Free Convection From Vertical and Horizontal Cylinders

attached to element surfaces are unsuited for measuring temperatures in convection circumstances since they seem to have a very pronounced effect on the temperature field. This, however, does not mean that appreciable overshoot does not occur under any circumstances. Ostroumov [2] observed overshoot using the same temperature-measurement technique employed in this work. However, he was considering the case of horizontal wires where such overshoot might eventually be explained as a result of a crossed bouyancy force and flow direction at the bottom of the wire. In conclusion, the conduction solution gives a good prediction of the temperature response of thin wires in liquids and, as far as it can be shown, in air. The simplified quasistatic solution gives reasonable predictions only for transients in air, and even here the conduction solution appears more accurate

An Exploration of Fetish Social Networks and Communities

Online Social Networks (OSNs) provide a venue for virtual interactions and relationships between individuals. In some communities, OSNs also facilitate arranging offline meetings and relationships. FetLife, the world’s largest anonymous social network for the BDSM, fetish and kink communities, provides a unique example of an OSN that serves as an interaction space, community organizing tool, and sexual market. In this paper, we present a first look at the characteristics of European members of Fetlife, comprising 504,416 individual nodes with 1,912,196 connections. We looked at user characteristics in terms of gender, sexual orientation, and preferred role. We further examined the homophilic communities and find that women in particular are far more platonically involved on the site than straight males. Our results suggest there are important differences between the FetLife community and conventional OSNs