Fabrication and high temperature characteristics of ion-implanted GaAs bipolar transistors and ring-oscillators

Ion implantation techniques that permit the reproducible fabrication of bipolar GaAs integrated circuits are studied. A 15 stage ring oscillator and discrete transistor were characterized between 25 and 400 C. The current gain of the transistor was found to increase slightly with temperature. The diode leakage currents increase with an activation energy of approximately 1 eV and dominate the transistor leakage current 1 sub CEO above 200 C. Present devices fail catastrophically at about 400 C because of Au-metallization

Development of a microelectronic module Final report

Feasibility of operating gallium arsenide devices in high temperature microelectronic circuit

Solid state Ku-band spacecraft transmitters

A transmitter is considered that consists of GaAs IMPATT and Read diodes operating in a microstrip circuit environment to provide amplification with a minimum of 63 db small signal gain and a minimum compressed gain at 5 W output of 57 db. Reported are Schottky-Read diode design and fabrication, microstrip and circulator optimization, preamplifier development, power amplifier development, dc-to-dc converter design, and integration of the breadboard transmitter modules. A four-stage power amplifier in cascade with a three-stage preamplifier had an overall gain of 56.5 db at 13.5 GHz with a power output of 4.5 W. A single-stage Read amplifier delivered 5.9 W with 4 db gain at 22% efficiency

IC Ku-band Impatt Amplifier

High efficiency GaAs low-high-low IMPATTs were investigated. Theoretical analyses were employed to establish a design window for the material parameters to maximize microwave performance. Single mesa devices yielded typically 2 to 3 W with 16 to 23% efficiency in waveguide oscillator test circuits. IMPATTs with high reliability Pt/TiW/Pt/Au metallizations were subjected to temperature stress, non-rf bias-temperature stress, and rf bias-temperature stress. Assuming that temperature is the driving force behind the dominant failure mechanism, a mean-time-to-failure considerably greater than 500,000 hours is indicated by the stress tests. A 15 GHz, 4W, 56 dB gain microstrip amplifier was realized using GaAs FETs and IMPATTs. Power combining using a 3 db Lange coupler is employed in the power output stage having an intrinsic power-added efficiency of 15.7%. Overall dc-to-rf efficiency of the amplifier is 10.8%. The amplifier has greater than a 250 MHz, 1 db bandwidth; operates over the 0 deg to 50 C (base plate) temperature range with less than 0.5 db change in the power output; weighs 444 grams; and has a volume of 220 cu cm

Composition of bird nests is a species-specific characteristic

Bird nests represent an extended phenotype of individuals expressed during reproduction and so exhibit variability in composition, structure and function. Descriptions of nests based on qualitative observations suggest that there is interspecific variation in size and composition but there are very few species in which this has been confirmed. For these species, data of the amounts of different materials indicate that nest construction behaviour is plastic and affected by a variety of factors, such as prevailing temperature, geographic location, and availability of materials. The lack of data on nest composition is hampering our understanding of how nests achieve their various functions and how different species solve the problem of building a nest that will accommodate incubation and allow successful hatching of eggs. This study deconstructed nests of four species of the Turdidae, four species of the Muscicapidae, and six species of the Fringillidae and quantified the size of the nests and their composition. These data were used to test: (1) whether nest size correlated with adult bird mass; (2) whether it was possible to distinguish between species on the basis of their nest composition; and (3) whether, within a species, it was possible to distinguish between the cup lining and the rest of the nest based on composition. Most but not all nest dimensions correlated with bird mass. Principal component analysis revealed species differences based on nest composition and discriminant analysis could distinguish cup lining from the outer nest based on material composition. Intraspecific variation in composition varied among species and in general fewer types of material were found in the cup lining than the outer nest. These data provide insight into how nests are constructed by the different species and in conjunction with studies of the mechanical, thermal and hydrological properties of a nest, will begin to reveal how and why individual species select particular combinations of materials to build a nest

Breeding ecology of Eurasian bullfinches Pyrrhula pyrrhula

Producción CientíficaThe breeding ecology of the Iberian subspecies of the Eurasian bullfinch, Pyrrhula pyrrhula iberiae, is addressed for the first time. The studied population occupied a hedgerow habitat in northwestern Spain. Individuals directly watched in the study area and details of these sightings were recorded over a six-year period, and a total of 56 nests were monitored. The earliest date of nest building was within 11–30 April for all years. Fledglings were recorded leaving the nest during all the ten-day periods from the end of May to mid-August. Nest attendance, from the early building stage to when nestlings were ready to leave the nest, lasted approximately 36 days. The overall mean clutch size was 4.56 eggs. Clutch size decreased significantly at the end of the breeding season. For all egg traits, the minimum values for standard deviation were obtained in the intra-clutch analysis, and egg length was more variable than width. Nesting success increased progressively from April–May to June–July and August. The main proximate cause of nest failure was egg desertion/predation, followed by nest desertion during nest building and nestling desertion/predation. Mammals were the main agents in nests where the probable predator could be identified. Approximately half of the eggs became fledglings leaving the nest, no significant seasonal differences being observed for this parameter. In August, the ratio of juveniles to adults was 2.5–4.1, juveniles representing approximately 70–80% of the individuals seen and identified that month. The absence of significant interannual variation in important reproductive parameters could have been due to lack of interannual variation in the availability of food resources. Compared to other subspecies, mean clutch size of Iberian bullfinches is the smallest recorded in the western Palearctic, and they showed an earlier start to the breeding season and shorter mean egg length than North European and Russian populations