Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties

In this work, pure aluminium powders of different average particle size were compacted, sintered into discs and tested for mechanical strength at different strain rates. The effects of average particle size (15, 19, and 35 μm), sintering rate (5 and 20 °C/min) and sample indentation test speed (0.5, 0.7, and 1.0 mm/min) were examined. A compaction pressure of 332 MPa with a holding time of six minutes was used to produce the green compacted discs. The consolidated green specimens were sintered with a holding time of 4 h, a temperature of 600 °C in an argon atmosphere. The resulting sintered samples contained higher than 85% density. The mechanical properties and microstructure were characterized using indentation strength measurement tests and SEM analysis respectively. After sintering, the aluminium grain structure was observed to be of uniform size within the fractured samples. The indentation test measurements showed that for the same sintering rate, the 35 μm powder particle size provided the highest radial and tangential strength while the 15 μm powder provided the lowest strengths. Another important finding from this work was the increase in sintered sample strength which was achieved using the lower sinter heating rate, 5 °C/min. This resulted in a tangential stress value of 365 MPa which was significantly higher than achieved, 244 MPa, using the faster sintering heating rate, 20 °C/min

Carbon-nitrogen interactions in European forests and semi-natural vegetation - Part 1: Fluxes and budgets of carbon, nitrogen and greenhouse gases from ecosystem monitoring and modelling

The impact of atmospheric reactive nitrogen (N$_{r}$) deposition on carbon (C) sequestration in soils and biomass of unfertilized, natural, semi-natural and forest ecosystems has been much debated. Many previous results of this dC/dN response were based on changes in carbon stocks from periodical soil and ecosystem inventories, associated with estimates of N$_{r}$ deposition obtained from large-scale chemical transport models. This study and a companion paper (Flechard et al., 2020) strive to reduce uncertainties of N effects on C sequestration by linking multi-annual gross and net ecosystem productivity estimates from 40 eddy covariance flux towers across Europe to local measurement-based estimates of dry and wet N$_{r}$ deposition from a dedicated collocated monitoring network. To identify possible ecological drivers and processes affecting the interplay between C and N$_{r}$ inputs and losses, these data were also combined with in situ flux measurements of NO, N$_{2}$O and CH$_{4}$ fluxes; soil NO$_{3}$̅ leaching sampling; and results of soil incubation experiments for N and greenhouse gas (GHG) emissions, as well as surveys of available data from online databases and from the literature, together with forest ecosystem (BASFOR) modelling. Multi-year averages of net ecosystem productivity (NEP) in forests ranged from -70 to 826 gCm$^{-2}$ yr$^{-1}$ at total wet+dry inorganic N$_{r}$ deposition rates (N$_{dep}$) of 0.3 to 4.3 gNm$^{-2}$ yr$^{-1}$ and from -4 to 361 g Cm$^{-2}$ yr$^{-1}$ at N$_{dep}$ rates of 0.1 to 3.1 gNm$^{-2}$ yr$^{-1}$ in short semi-natural vegetation (moorlands, wetlands and unfertilized extensively managed grasslands). The GHG budgets of the forests were strongly dominated by CO$_{2}$ exchange, while CH$_{4}$ and N$_{2}$O exchange comprised a larger proportion of the GHG balance in short semi-natural vegetation. Uncertainties in elemental budgets were much larger for nitrogen than carbon, especially at sites with elevated N$_{dep}$ where N$_{r}$ leaching losses were also very large, and compounded by the lack of reliable data on organic nitrogen and N$_{2}$ losses by denitrification. Nitrogen losses in the form of NO, N$_{2}$O and especially NO$_{3}$̅ were on average 27%(range 6 %–54 %) of N$_{dep}$ at sites with N$_{dep}$ 3 gNm$^{-2}$ yr$^{-1}$. Such large levels of N$_{r}$ loss likely indicate that different stages of N saturation occurred at a number of sites. The joint analysis of the C and N budgets provided further hints that N saturation could be detected in altered patterns of forest growth. Net ecosystem productivity increased with N$_{r}$ deposition up to 2–2.5 gNm$^{-2}$ yr$^{-1}$, with large scatter associated with a wide range in carbon sequestration efficiency (CSE, defined as the NEP = GPP ratio). At elevated N$_{dep}$ levels (> 2.5 gNm$^{-2}$ yr$^{-1}$), where inorganic N$_{r}$ losses were also increasingly large, NEP levelled off and then decreased. The apparent increase in NEP at low to intermediate N$_{dep}$ levels was partly the result of geographical cross-correlations between N$_{dep}$ and climate, indicating that the actual mean dC/dN response at individual sites was significantly lower than would be suggested by a simple, straightforward regression of NEP vs. N$_{dep}$

European scale application of atmospheric reactive nitrogen measurements in a low-cost approach to infer dry deposition fluxes.

A European scale network was established in 2006 as part of the NitroEurope Integrated Project to infer reactive nitrogen (Nr) dry deposition fluxes, based on low-cost sampling of gaseous and aerosol species and inferential modelling. The network provides monthly measurements of NH3, NH4+, HNO3 and NO3-, as well as SO2, SO42 , HCl, Cl- and base cations at 58 sites. Measurements are made with an established low-cost denuder methodology (DELTA) as a basis to: 1) examine temporal trends and spatial patterns across Europe, 2) improve and calibrate inferential modelling techniques to estimate exchange of Nr species, 3) provide best estimates of atmospheric dry N deposition, and 4) permit an analysis of net GHG exchange in relation to atmospheric and agricultural N inputs at the European scale. Responsibility for measurements is shared between seven European laboratories. An inter-comparison of the DELTA implementation by 6 laboratories at 4 test sites (Montelibretti, Italy; Braunschweig, Germany; Paterna, Spain and Auchencorth, UK) from July to October 2006 provided training for the laboratories and showed that good agreement was achieved in different climatic conditions (87% of laboratory site means within 20% of the inter-laboratory median). Results obtained from the first year of measurements show substantial spatial variability in atmospheric Nr concentrations, illustrating the major local (NH3)and regional (HNO3, NO3-, NH4+) differences in Nr concentrations. These results provide the basis to develop future estimates of site-based Nr dry deposition fluxes across Europe, and highlight the role of NH3, largely of agricultural origin, which was the largest single constituent and will dominate dry Nr fluxes at most sites

Appositional enamel growth in molars of South African fossil hominids

Enamel is formed incrementally by the secretory activity of ameloblast cells. Variable stages of secretion result in the formation of structures known as cross striations along enamel prisms, for which experimental data demonstrate a correspondence with daily periods of secretion. Patterns of variation in this daily growth are important to understanding mechanisms of tooth formation and the development of enamel thickness. Transmitted light microscopy (TLM) of histological ground sections and scanning electron microscopy (SEM) of bulk specimens or their surface replicas are the usual methods for investigating cross striations. However, these methods pose some constraints on the study of these features in Plio-Pleistocene hominid enamel, the specimens of which may only rarely be sectioned for TLM or examined on only their most superficial surfaces for SEM. The recent development of portable confocal scanning optical microscopy (PCSOM) resolves some of the restrictions on fractured enamel surfaces, allowing the visualization of cross striations by direct examination. This technology has been applied here to the study of Australopithecus africanus and Paranthropus robustus hominid molars from the Plio-Pleistocene of South Africa. We hypothesize that these taxa have increased enamel appositional rates compared with modern humans, because despite having thicker enamelled molars (particularly P. robustus), the enamel crowns of these fossil taxa take an equivalent or reduced amount of time to form. Cross striations were measured in cuspal, lateral and cervical regions of the enamel crowns, and, within each region, the inner, middle and outer zones. Values obtained for A. africanus outer zones of the enamel crown are, in general, lower than those for P. robustus, indicating faster forming enamel in the latter, while both taxa show higher rates of enamel growth than modern humans and the African great apes. This demonstrates a relatively high degree of variability in the mechanisms underlying the development of enamel across taxa