Measuring kinetic energy changes in the mesoscale with low acquisition rates

We describe a new technique to estimate the mean square velocity of a Brownian particle from time series of the position of the particle sampled at frequencies several orders of magnitude smaller than the momentum relaxation frequency. We apply our technique to determine the mean square velocity of single optically trapped polystyrene microspheres immersed in water. The velocity is increased applying a noisy electric field that mimics a higher kinetic temperature. Therefore, we are able to measure the average kinetic energy change in isothermal and non-isothermal quasistatic processes. Moreover, we show that the dependence of the mean square time-averaged velocity on the sampling frequency can be used to quantify properties of the electrophoretic mobility of a charged colloid. Our method could be applied to detect temperature gradients in inhomogeneous media and to characterize the complete thermodynamics of microscopic heat engines.Comment: 9 pages, 5 figure

Adiabatic processes realized with a trapped Brownian particle

We experimentally realize quasistatic adiabatic processes using a single optically-trapped micro- sphere immersed in water whose effective temperature is controlled by an external random electric field. A full energetic characterization of adiabatic processes that preserve either the position dis- tribution or the full phase space volume is presented. We show that only in the latter case the exchanged heat and the change in the entropy of the particle vanish when averaging over many repetitions. We provide analytical expressions for the distributions of the fluctuating heat and en- tropy, which we verify experimentally. We show that the heat distribution is asymmetric for any non-isothermal quasistatic process. Moreover, the shape of the distribution of the system entropy change in the adiabatic processes depends significantly on the number of degrees of freedom that are considered for the calculation of system entropy

Controlling factors on clay mineral assemblages: insights from facies analysis of Pliocene to Pleistocene coastal margin deposits, Western Portugal

The clay fractions in the Pliocene to Pleistocene coastal margin record are usually dominated by kaolinite and illite, with lesser amounts of vermiculite, 10-14 mixed layer clays and smectite. The high clay mineral crystallinity, the mineralogical relations to facies and depositional setting and some horizontal variations along coeval deposits suggest that clay assemblages are mainly detrital. Illite is more important in inner shelf deposits and particularly in alluvial deposits from eastern locations. The high illite content in eastern alluvial deposits is explained by the input from the neighbouring Iberian Variscan Massif that is rich in mica. The high kaolinite content in prograding sand and gravel coastal plain is partially explained by the availability of this mineral in the drainage areas. Given the arkosic nature of some of these deposits, post-depositional feldspars weathering would also contribute to an increase in kaolinite content. Vermiculite is particularly important close to the surface and to unconformities, in horizons influenced by pedogenetic processes that have more aluminous illite with relatively low crystallinity. In organic rich mud sediments low pH conditions favour post-depositional transformation of illite to vermiculite and mixed layer clays

Efeito da intensificação do uso do solo na comunidade de artrópodes da ilha Terceira

13º Congresso da APDR (Associação Portuguesa para o Desenvolvimento Rural). Angra do Heroísmo, Julho de 2007.As actividades económicas têm um impacto no território, verificando-se em estudos na área da conservação da natureza, de fragmentação de habitats e de agro-ecossistemas que as alterações no Uso do Solo afectam a Biodiversidade. O processo histórico de colonização dos Açores é responsável pela redução da área da floresta nativa das ilhas, com consequências na riqueza específica da fauna insular. O objectivo deste trabalho é de analisar a distribuição da riqueza da fauna de artrópodes em diferentes usos do solo na ilha Terceira. Cartografou-se com uma quadrícula de 500X500 m os seguintes usos do solo: Pastagem Intensiva, Pastagem Semi-Natural, Plantação Exótica de Eucalipto, Plantação Exótica de Criptoméria e Floresta Nativa. Na análise efectuada adicionou-se ainda o Prado Natural e a Turfeira, habitats de área mais reduzida. Proporcionalmente à área de cada uso do solo efectuou-se a implantação de transeptos de 150 m, com 30 armadilhas cada, num total de 82 transeptos. Com o recurso ao Software Spatial Analysis in Macroecology (SAM), utilizaram-se métodos de regressão para determinar a relação entre a riqueza em espécies do conjunto de artrópodes, das espécies introduzidas, das indígenas e das endémicas e variáveis ambientais (climáticas) e a percentagem de cada uso do solo. Os nossos resultados confirmam que as comunidades de artrópodes são afectados por um gradiente de intensificação do uso do solo. A pastagem semi natural funciona como um habitat de transição, podendo ser potencialmente um corredor para um mecanismo de substituição de espécies indígenas por espécies exóticas na floresta Nativa. Quaisquer medidas de conservação e gestão da biodiversidade poderão ser avaliadas com o recurso a técnicas de modelação, a partir das relações quantificadas neste estudo

Variability of Indoor Radon Level Accumulation: a Study in Portuguese Thermal Spas

The aim of this work was to measure the concentration of the indoor radon in 16 Portuguese thermal spas (38% of the thermal spas in Portugal) and assess its variability within each establishment as well as its contribution to the effective dose. The measurements were performed with CR-39 passive detectors placed at different workplaces within each thermal spa, for an average period of 42 days, in different seasons of the year. The indoor radon concentrations ranged from 68 to 4335 Bq/m3 with a geometric mean of 437 Bq/m3 and an arithmetic mean of 702 Bq/m3. Geological factors that can lead to such behaviour are discussed. The results showed that the EU reference level of 300 Bq/m3 (Directive 2013/59/EURATOM) was exceeded in several cases. No significant differences were observed among measurements taken during different seasons of the year, however, large differences of radon concentrations in different rooms of the same thermal establishment were noted as well as significant difference when comparing to other thermal establishments. The effective dose resulting from the inhalation of radon ranged between 2 and 32 mSv/y. In 43% of the thermal spas, the effective dose is likely to be higher than 6 mSv/y, which means that the exposure should be managed as a "planned exposure situation" according to the European Directive 2013/59/EURATOM. Also, in 19% of the cases, the annual effective dose exceeds 20 mSv/y, and in these cases, monitoring and radiological protection is required as laid down in the European Directive 2013/59/EURATOM. (c) RAD Conference Proceedings. All rights reserved

CFD Codes efficiency case study: Ability to perform numerical simulations in the refrigerated compartment of a foodstuff transportation vehicle

The purpose of the present work is to describe the ability of the advanced computer packages (CFD codes) to perform numerical simulations of general refrigeration engineering problems. The case study concerns the modelling of three-dimensional turbulent airflow with thermal buoyant effects and air temperature distribution in the refrigerated compartment of a perishable foodstuff transportation vehicle. The numerical predictions obtained with three commercial codes (PHOENICS, FLUENT and CFX) and an academic one are evaluated and compared with experimental data. The validation of the numerical results is analysed and the modelling capabilities, usage simplicity and user interface of each code are discussed.info:eu-repo/semantics/publishedVersio

Performance evaluation of IB-DFE-based strategies for SC-FDMA systems

The aim of this paper is to propose and evaluate multi-user iterative block decision feedback equalization (IB-DFE) schemes for the uplink of single-carrier frequency-division multiple access (SC-FDMA)-based systems. It is assumed that a set of single antenna users share the same physical channel to transmit its own information to the base station, which is equipped with an antenna array. Two space-frequency multi-user IB-DFE-based processing are considered: iterative successive interference cancellation and parallel interference cancellation. In the first approach, the equalizer vectors are computed by minimizing the mean square error (MSE) of each individual user, at each subcarrier. In the second one, the equalizer matrices are obtained by minimizing the overall MSE of all users at each subcarrier. For both cases, we propose a simple yet accurate analytical approach for obtaining the performance of the discussed receivers. The proposed schemes allow an efficient user separation, with a performance close to the one given by the matched filter bound for severely time-dispersive channels, with only a few iterations

A arte atlântica do Crastoeiro (Norte de Portugal) : contextos e significados

Basados en los resultados de las excavaciones arqueológicas realizadas en los complejos I y II del arte atlántico de Crastoeiro, localizados en el Monte de la Senhora da Graça y partiendo del supuesto de que los individuos no sólo viven en un espacio sino que también están inmersos o incorporados en el, este trabajo tiene como objetivo establecer algunas interpretaciones no sólo sobre la biografía de cada uno de estos loci, sino también, entender los diferentes procesos de interacción de las comunidades locales con el Monte da Senhora da Graça, especialmente aquellos que se relacionan con la elección, la construcción, la frecuencia y las acciones inherentes al uso de estos lugares que designamos arte rupestre

Diferenças na intensidade de alteração química de sedimentos Pliocénicos a norte e sul do Mondego

Procede-se a uma análise comparativa de características mineralógicas e geoquímicas (elementos maiores), usadas na definição de intensidade de altyeração química, de sedimentos pliocénicos colhidos na margem Atlântica a norte e sul do rio Mondego. Ainda que se note alguma influência da granulometria dos sedimentos nas características composicionais, as unidades a norte do Mondego revelam sempre alteração química menos intensa que as unidades a sul do Mondego. Estas diferenças justificam-se por proveniência distinta e não devem ter qualquer significado climático