Loupe: Driving the Development of OS Compatibility Layers

Supporting mainstream applications is fundamental for a new OS to have impact. It is generally achieved by developing a layer of compatibility allowing applications developed for a mainstream OS like Linux to run unmodified on the new OS. Building such a layer, as we show, results in large engineering inefficiencies due to the lack of efficient methods to precisely measure the OS features required by a set of applications. We propose Loupe, a novel method based on dynamic analysis that determines the OS features that need to be implemented in a prototype OS to bring support for a target set of applications and workloads. Loupe guides and boosts OS developers as they build compatibility layers, prioritizing which features to implement in order to quickly support many applications as early as possible. We apply our methodology to 100+ applications and several OSes currently under development, demonstrating high engineering effort savings vs. existing approaches: for example, for the 62 applications supported by the OSv kernel, we show that using Loupe, would have required implementing only 37 system calls vs. 92 for the non-systematic process followed by OSv developers. We study our measurements and extract novel key insights. Overall, we show that the burden of building compatibility layers is significantly less than what previous works suggest: in some cases, only as few as 20% of system calls reported by static analysis, and 50% of those reported by naive dynamic analysis need an implementation for an application to successfully run standard benchmarks.Comment: Accepted to appear at ASPLOS'24 (https://www.asplos-conference.org/asplos2024/

The genome sequence of the lesser marbled fritillary, Brenthis ino, and evidence for a segregating neo-Z chromosome

This is the final version. Available on open access from Oxford University Press via the DOI in this recordData availability: Supplementary Table 1 contains the metadata for the four individuals used for this project. The genome assembly, gene annotation, and raw sequence data can be found at the European Nucleotide Archive under project accession PRJEB49202. The scripts used for analyzing HiC data (chomper.py and HiC_view.py), the script used for calculating site degeneracy (partition_cds.py), and the script used for visualizing synteny (busco2synteny.py) can be found at the following github repository: https://github.com/A-J-F-Mackintosh/Mackintosh_et_al_2022_Bino. The mitochondrial genome sequence and the TE annotation can be found at the same repository.The lesser marbled fritillary, Brenthis ino (Rottemburg, 1775), is a species of Palearctic butterfly. Male Brenthis ino individuals have been reported to have between 12 and 14 pairs of chromosomes, a much-reduced chromosome number than is typical in butterflies. Here, we present a chromosome-level genome assembly for Brenthis ino, as well as gene and transposable element annotations. The assembly is 411.8 Mb in length with a contig N50 of 9.6 Mb and a scaffold N50 of 29.5 Mb. We also show evidence that the male individual from which we generated HiC data was heterozygous for a neo-Z chromosome, consistent with inheriting 14 chromosomes from one parent and 13 from the other. This genome assembly will be a valuable resource for studying chromosome evolution in Lepidoptera, as well as for comparative and population genomics more generally

High resolution DNA barcode library for European butterflies reveals continental patterns of mitochondrial genetic diversity

The study of global biodiversity will greatly benefit from access to comprehensive DNA barcode libraries at continental scale, but such datasets are still very rare. Here, we assemble the first high-resolution reference library for European butterflies that provides 97% taxon coverage (459 species) and 22,306 COI sequences. We estimate that we captured 62% of the total haplotype diversity and show that most species possess a few very common haplotypes and many rare ones. Specimens in the dataset have an average 95.3% probability of being correctly identified. Mitochondrial diversity displayed elevated haplotype richness in southern European refugia, establishing the generality of this key biogeographic pattern for an entire taxonomic group. Fifteen percent of the species are involved in barcode sharing, but two thirds of these cases may reflect the need for further taxonomic research. This dataset provides a unique resource for conservation and for studying evolutionary processes, cryptic species, phylogeography, and ecology.Peer reviewe

The role of ETG modes in JET-ILW pedestals with varying levels of power and fuelling

We present the results of GENE gyrokinetic calculations based on a series of JET-ITER-like-wall (ILW) type I ELMy H-mode discharges operating with similar experimental inputs but at different levels of power and gas fuelling. We show that turbulence due to electron-temperature-gradient (ETGs) modes produces a significant amount of heat flux in four JET-ILW discharges, and, when combined with neoclassical simulations, is able to reproduce the experimental heat flux for the two low gas pulses. The simulations plausibly reproduce the high-gas heat fluxes as well, although power balance analysis is complicated by short ELM cycles. By independently varying the normalised temperature gradients (omega(T)(e)) and normalised density gradients (omega(ne )) around their experimental values, we demonstrate that it is the ratio of these two quantities eta(e) = omega(Te)/omega(ne) that determines the location of the peak in the ETG growth rate and heat flux spectra. The heat flux increases rapidly as eta(e) increases above the experimental point, suggesting that ETGs limit the temperature gradient in these pulses. When quantities are normalised using the minor radius, only increases in omega(Te) produce appreciable increases in the ETG growth rates, as well as the largest increases in turbulent heat flux which follow scalings similar to that of critical balance theory. However, when the heat flux is normalised to the electron gyro-Bohm heat flux using the temperature gradient scale length L-Te, it follows a linear trend in correspondence with previous work by different authors

Spectroscopic camera analysis of the roles of molecularly assisted reaction chains during detachment in JET L-mode plasmas

The roles of the molecularly assisted ionization (MAI), recombination (MAR) and dissociation (MAD) reaction chains with respect to the purely atomic ionization and recombination processes were studied experimentally during detachment in low-confinement mode (L-mode) plasmas in JET with the help of experimentally inferred divertor plasma and neutral conditions, extracted previously from filtered camera observations of deuterium Balmer emission, and the reaction coefficients provided by the ADAS, AMJUEL and H2VIBR atomic and molecular databases. The direct contribution of MAI and MAR in the outer divertor particle balance was found to be inferior to the electron-atom ionization (EAI) and electron-ion recombination (EIR). Near the outer strike point, a strong atom source due to the D+2-driven MAD was, however, observed to correlate with the onset of detachment at outer strike point temperatures of Te,osp = 0.9-2.0 eV via increased plasma-neutral interactions before the increasing dominance of EIR at Te,osp < 0.9 eV, followed by increasing degree of detachment. The analysis was supported by predictions from EDGE2D-EIRENE simulations which were in qualitative agreement with the experimental observations

Shattered pellet injection experiments at JET in support of the ITER disruption mitigation system design

A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme

New H-mode regimes with small ELMs and high thermal confinement in the Joint European Torus

New H-mode regimes with high confinement, low core impurity accumulation, and small edge-localized mode perturbations have been obtained in magnetically confined plasmas at the Joint European Torus tokamak. Such regimes are achieved by means of optimized particle fueling conditions at high input power, current, and magnetic field, which lead to a self-organized state with a strong increase in rotation and ion temperature and a decrease in the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with a metallic wall environment such as the ones expected in ITER.& nbsp;Published under an exclusive license by AIP Publishing

Overview of JET results for optimising ITER operation

The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (α) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER