Removal of electrostatic artifacts in magnetic force microscopy by controlled magnetization of the tip: application to superparamagnetic nanoparticles

Magnetic force microscopy (MFM) has been demonstrated as valuable technique for the characterization of magnetic nanomaterials. To be analyzed by MFM techniques, nanomaterials are generally deposited on flat substrates, resulting in an additional contrast in MFM images due to unavoidable heterogeneous electrostatic tip-sample interactions, which cannot be easily distinguished from the magnetic one. In order to correctly interpret MFM data, a method to remove the electrostatic contributions from MFM images is needed. In this work, we propose a new MFM technique, called controlled magnetization MFM (CM-MFM), based on the in situ control of the probe magnetization state, which allows the evaluation and the elimination of electrostatic contribution in MFM images. The effectiveness of the technique is demonstrated through a challenging case study, i.e., the analysis of superparamagnetic nanoparticles in absence of applied external magnetic field. Our CM-MFM technique allowed us to acquire magnetic images depurated of the electrostatic contributions, which revealed that the magnetic field generated by the tip is sufficient to completely orient the superparamagnetic nanoparticles and that the magnetic tip-sample interaction is describable through simple models once the electrostatic artifacts are removed

Size matters for in vitro gene delivery: investigating the relationships among complexation protocol, transfection medium, size and sedimentation

Although branched and linear polyethylenimines (bPEIs and lPEIs) are gold standard transfectants, a systematic analysis of the effects of the preparation protocol of polyplexes and the composition of the transfection medium on their physicochemical behaviour and effectiveness in vitro have been much neglected, undermining in some way the identification of precise structure-function relationships. This work aimed to address these issues. bPEI/DNA and lPEI/DNA, prepared using two different modes of addition of reagents, gave rise to polyplexes with exactly the same chemical composition but differing in dimensions. Upon dilution in serum-free medium, the size of any kind of polyplex promptly rose over time while remained invariably stable in complete DMEM. Of note, the bigger the dimension of polyplexes (in the nano- to micrometer range), the greater their efficiency in vitro. Besides, centrifugal sedimentation of polyplexes displaying different dimensions to speed up and enhance their settling onto cells boosted transfection efficiencies. Conversely, transgene expression was significantly blunted in cells held upside-down and transfected, definitively pointing out the impact of gravitational sedimentation of polyplexes on their transfection efficiency. Overall, much more attention must be paid to the actual polyplex size that relies on the complexation conditions and the transfection medium

Effects of solar radiation on collagen-based biomaterials

The effect of solar radiation on collagen and collagen/synthetic polymer blends in the form of thin films and solutions has been studied by UV-VIS and FTIR spectroscopies. Films and solutions of collagen blended with poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) were irradiated by solar light. It was found that UV-VIS spectra, which characterize collagen, collagen/PVA, and collagen/PVP blended films, were significantly altered by solar radiation. FTIR spectra of collagen, collagen/PVA, and collagen/PVP films showed that after solar irradiation, the positions of Amide A bands were shifted to lower wavenumbers. There was not any significant alteration in the position of Amide I and Amide II bands of collagen and its blends after solar radiation. The effect of solar UV radiation in comparison with artificial UV radiation has been discussed

Collagen-based tissue engineering strategies for vascular medicine

Cardiovascular diseases (CVDs) account for the 31% of total death per year, making them the first cause of death in the world. Atherosclerosis is at the root of the most life-threatening CVDs. Vascular bypass/replacement surgery is the primary therapy for patients with atherosclerosis. The use of polymeric grafts for this application is still burdened by high-rate failure, mostly caused by thrombosis and neointima hyperplasia at the implantation site. As a solution for these problems, the fast re-establishment of a functional endothelial cell (EC) layer has been proposed, representing a strategy of crucial importance to reduce these adverse outcomes. Implant modifications using molecules and growth factors with the aim of speeding up the re-endothelialization process has been proposed over the last years. Collagen, by virtue of several favorable properties, has been widely studied for its application in vascular graft enrichment, mainly as a coating for vascular graft luminal surface and as a drug delivery system for the release of pro-endothelialization factors. Collagen coatings provide receptor-ligand binding sites for ECs on the graft surface and, at the same time, act as biological sealants, effectively reducing graft porosity. The development of collagen-based drug delivery systems, in which small-molecule and protein-based drugs are immobilized within a collagen scaffold in order to control their release for biomedical applications, has been widely explored. These systems help in protecting the biological activity of the loaded molecules while slowing their diffusion from collagen scaffolds, providing optimal effects on the targeted vascular cells. Moreover, collagen-based vascular tissue engineering substitutes, despite not showing yet optimal mechanical properties for their use in the therapy, have shown a high potential as physiologically relevant models for the study of cardiovascular therapeutic drugs and diseases. In this review, the current state of the art about the use of collagen-based strategies, mainly as a coating material for the functionalization of vascular graft luminal surface, as a drug delivery system for the release of pro-endothelialization factors, and as physiologically relevant in vitro vascular models, and the future trend in this field of research will be presented and discussed

Vibropolyfection: coupling polymer-mediated gene delivery to mechanical stimulation to enhance transfection of adherent cells

Background: With the success of recent non-viral gene delivery-based COVID-19 vaccines, nanovectors have gained some public acceptance and come to the forefront of advanced therapies. Unfortunately, the relatively low ability of the vectors to overcome cellular barriers adversely affects their effectiveness. Scientists have thus been striving to develop ever more effective gene delivery vectors, but the results are still far from satisfactory. Therefore, developing novel strategies is probably the only way forward to bring about genuine change. Herein, we devise a brand-new gene delivery strategy to boost dramatically the transfection efficiency of two gold standard nucleic acid (NA)/polymer nanoparticles (polyplexes) in vitro. Results: We conceived a device to generate milli-to-nanoscale vibrational cues as a function of the frequency set, and deliver vertical uniaxial displacements to adherent cells in culture. A short-lived high-frequency vibrational load (t= 5 min, f= 1,000 Hz) caused abrupt and extensive plasmalemma outgrowths but was safe for cells as neither cell proliferation rate nor viability was affected. Cells took about 1 hr to revert to quasi-naIve morphology through plasma membrane remodeling. In turn, this eventually triggered the mechano-activated clathrin-mediated endocytic pathway and made cells more apt to internalize polyplexes, resulting in transfection efficiencies increased from 10-to100-fold. Noteworthy, these results were obtained transfecting three cell lines and hard-to-transfect primary cells. Conclusions: In this work, we focus on a new technology to enhance the intracellular delivery of NAs and improve the transfection efficiency of non-viral vectors through priming adherent cells with a short vibrational stimulation. This study paves the way for capitalizing on physical cell stimulation(s) to significantly raise the effectiveness of gene delivery vectors in vitro and ex vivo

Effect of laser welding on the mechanical and degradation behaviour of Fe-20Mn-0.6C bioabsorbable alloy

Abstract The present work aims at exploring the influence of laser welding on the functional behaviour of a Fe-20Mn-0.6C (wt.%) bioabsorbable alloy. At first, the selection of the most suitable process speed (40 mm/s) was done in order to obtain a full penetration joint with limited taper. Then, microstructural and mechanical analyses of welded sheets confirmed suitable performance of the joint, without porosity, thus preserving chemical composition, mechanical resistance and ductility even after welding. In particular, the base material comprised both γ austenite and e martensite, while the welded samples showed a further type of martensite, namely α'. Moreover, ultimate tensile strength (1095 MPa and 1104 MPa in base and welded material, respectively) and elongation to failure (61.3% and 60.9%, respectively) were almost not influenced by the welding process. Considering the absorbable nature of these alloys, static immersion degradation tests were carried out, and confirmed that the surface of the welded bead did not exhibit a significant variation of the material degradation rate after 14 days in modified Hanks' solution. Finally, a significant accumulation of degradation products, mainly (Fe,Mn)CO3, was observed along the joining line

Tubular Bioartificial Organs: From Physiological Requirements to Fabrication Processes and Resulting Properties. A Critical Review

In this featured review manuscript, the aim is to present a critical survey on the processes available for fabricating bioartificial organs (BAOs). The focus will be on hollow tubular organs for the transport of anabolites and catabolites, i.e., vessels, trachea, esophagus, ureter and urethra, and intestine. First, the anatomic hierarchical structures of tubular organs, as well as their principal physiological functions, will be presented, as this constitutes the mandatory requirements for effectively designing and developing physiologically relevant BAOs. Second, 3D bioprinting, solution electrospinning, and melt electrowriting will be introduced, together with their capacity to match the requirements imposed by designing scaffolds compatible with the anatomical and physiologically relevant environment. Finally, the intrinsic correlation between processes, materials, and cells will be critically discussed, and directives defining the strengths, weaknesses, and opportunities offered by each process will be proposed for assisting bioengineers in the selection of the appropriate process for the target BAO and its specific required functions

INTERFACES ENTRE OS DOIS IRMÃOS, DE GERMANO ALMEIDA E CRÔNICA DE UMA MORTE ANUNCIADA, DE GABRIEL GARCÍA MÁRQUEZ

Este estudo tem como objetivo investigar, no âmbito das relações literárias contemporâneas entre a América Latina e Cabo Verde, como se dá o diálogo entre as obras Os dois irmãos (1995), de Germano Almeida, e Crônica de uma morte anunciada (1983), de Gabriel García Márquez a partir dos motivos que levaram a escrita dos dois romances. Investigará também como o espaço impacta o comportamento das personagens que, não raro, são movidas pelo contexto em que estão inseridas. Essas obras podem ser aproximadas também, numa abordagem comparativa, por outros fatores como a presença do mito entre irmãos e a defesa da honra da família, o drama familiar causado pelo ciúme ou pelo adultério seguido da reparação sob o signo da vingança, e a coerção imposta pelos valores da sociedade. Para isto, para se entender a correlação entre o espaço e as personagens, far-se-á uso dos conceitos teóricos de Antonio Candido (1972) e de Osman Lins (1976). Sobre o limiar entre a História e a ficção, a ambiguidade, que a autora denomina de “metaficção historiográfica”, buscou-se o estudo de Linda Hutcheon (1991)

Multiband Comparative Study of Optical Microvariability in RL vs. RQ Quasars

We present the results of an optical multi-band (BVR) photometric monitoring program of 22 core-dominated radio-loud quasars (CRLQs) and 22 radio-quiet quasars (RQQs). The aim was to compare the properties of microvariability in both types of quasars. We detected optical microvariability in 5 RQQs and 4 CRLQs. Our results confirm that microvariability in RQQs may be as frequent as in CRLQs. In addition we compare microvariability duty cycles in different bands. Finally, the implications for the origin of the microvariations are briefly discussed.Comment: 17 pages, 14 figures, Accepted for publication in the Astronomical Journa

Glioblastoma in the Elderly: Review of Molecular and Therapeutic Aspects

Glioblastoma (GBM) is the most aggressive primary brain tumour. As GBM incidence is associated with age, elderly people represent a consistent subgroup of patients. Elderly people with GBM show dismal prognosis (about 6 months) and limited response to treatments. Age is a negative prognostic factor, which correlates with clinical frailty, poorer tolerability to surgery or adjuvant radio-chemotherapy, and higher occurrence of comorbidities and/or secondary complications. The aim of this paper is to review the clinical and molecular characteristics, current therapeutic options, and prognostic factors of elderly patients with GBM