XOR multiplexing technique for nanocomputers

In emerging nanotechnologies, due to the manufacturing process, a significant percentage of components may be faulty. In order to make systems based on unreliable nano-scale components reliable, it is necessary to design fault-tolerant architectures. This paper presents a novel fault-tolerant technique for nanocomputers, namely the XOR multiplexing technique. This hardware redundancy technique is based on a numerous duplication of faulty components. We analyze the error distributions of the XOR multiplexing unit and the error distributions of multiple stages of the XOR multiplexing system, then compare them to the NAND multiplexing unit and the NAND multiplexing multiple stages system, respectively. The simulation results show that XOR multiplexing is more reliable than NAND multiplexing. Bifurcation theory is used to analyze the fault-tolerant ability of the system and the results show that XOR multiplexing technique has a high fault-tolerant ability. Similarly to the NAND multiplexing technique, this fault-tolerant technique is a potentially effective fault tolerant technique for future nanoelectronics

Study on segmented-rotor switched reluctance motors with different rotor pole numbers for bsg system of hybrid electric vehicles

© 1967-2012 IEEE. This paper investigates the design principles and performance optimization for segmented-rotor switched reluctance motors (SRSRMs) with different rotor pole numbers for belt-driven starter generators of hybrid electric vehicles. For the design principles, several constraints are derived for the numbers of stator and rotor poles, the dimensions, and the number of winding turns. Two SRSRMs with 16/10 and 16/14 stator/rotor poles are presented according to these principles. For the performance optimization, the two motors are optimized individually for maximizing the torque. To evaluate the effect of different segmented-rotor numbers, the overall performances of the two SRSRMs are investigated and compared. It is found that the 16/14 SRSRM has higher flux linkage and static torque. The 16/14 SRSRM exhibits higher torque and lower torque ripple at low speed operation, whereas at high speed, the 16/10 SRSRM performs better in terms of torque and power densities. Compared with the 16/14 SRSRM, the 16/10 SRSRM has higher final steady speed under the same startup condition. The 16/10 SRSRM can achieve higher steady speed under starter mode and provide higher generated power under braking mode. Moreover, the 16/10 SRSRM exhibits higher efficiency in the most feasible speed range, especially in high speed range, and it has wider high-efficiency area. Finally, a 16/10 SRSRM is prototyped and tested to validate the simulation results

Expression of Caveolin-1 in tongue squamous cell carcinoma by quantum dots

Quantum dots (QDs) are a new class of fluorescent probes to detect biomarker expression. The role of caveolin-1 (Cav-1) in tongue squamous cell carcinoma (TSCC) is still unknown. This study aimed to investigate the expression profile of Cav-1 in carcinogenesis and development of TSCC by QDs immunofluorescence histochemistry (QDs-IHC) and discuss the relationship between the Cav-1 expression and the clinicopathological outcomes. QDs-IHC was used to detect Cav-1 expression in tissue microarrays including normal tongue mucosa (NTM; n=10), hyperplastic tongue mucosa (HTM; n=10), tongue pre-cancer lesions (TPL; n=15) and primary tongue squamous cell carcinoma (PTSCC; n=61). Correlations between the Cav-1 expression and clinicopathologic variables were evaluated statistically. Cells positive for Cav-1 were clearly detected and bright images were obtained in a fine, granular pattern at the cell membrane and cytoplasm using QDs-IHC. The rate of Cav-1 immunoreactivity increased progressively from NTM (0%), HTM (0%), TPL (36%) to PTSCC (74%). When compared with each other, there was statistical significance among PTSCC, TPL and NTM as well as among PTSCC, TPL and HTM. Moreover, Cav-1 expression level in PTSCC was correlated positively with clinical stage and histologic grade. QDs-IHC could accurately detect protein location in tongue mucosa. An increased expression of Cav-1 in the stepwise carcinogenesis from NTM, HTM, TPL to PTSCC suggested that Cav-1 might be an oncogene in the development of tongue squamous cell carcinoma

Cooperative inter-vehicle communication protocol with low cost differential GPS

This paper describes a cooperative MANET protocol dedicated to intelligent transport systems, named CIVIC (Communication Inter Véhicule Intelligente et Coopérative). The CIVIC protocol is an auto-configuration inter-vehicle communication protocol, which supports adhoc and infrastructure networks, contains reactive and proactive routing components, and adapts different wireless standards. It is a context-aware protocol reacting to vehicle status, road traffic, and geographic environment. It supports location-based communication. To improve the accuracy of GPS, it integrates a localization solution called LCD-GPS (Low Cost Differential GPS). It has been implemented and experimented on the LiveNode sensor developed by our lab. At the end of this paper, an application project MobiPlus is introduced

Modified yupingfeng formula for the treatment of stable chronic obstructive pulmonary disease: a systematic review of randomized controlled trials

Background: Chronic obstructive pulmonary disease (COPD), is a very  common disease of respiratory system. An increasing number of clinical  trials on Yupingfeng formula in the management of stable COPD have been performed. However, the evidence base for it remains unknown. This review aims at assessing the efficacy, and safety of modified Yupingfeng  formula in the treatment of stable COPD through a systematic review of all available randomized controlled trials. Materials and Methods: Literature retrieval was conducted using four English databases (CENTRAL, PubMed, EMBASE, and ISI Web of Science), and four Chinese databases (CBM, CNKI, VIP, and WANFANG), from respective inception to January 2013, and supplemented with a manual search. Review authors independently extracted the trial data, and assessed the quality of each trial. Methodological quality was assessed by Cochrane risk of bias and Jadad’s scale. The following outcomes were evaluated: (1) lung function; (2) 6-minute walk distance (6MWD); (3) effective rate; (4) serum levels of IgA, IgG and IgE; and (5) adverse events. Data were analyzed using STATA 12.0 software.Results: A total of nine studies involving 660, stable COPD patients were identified. Patients from all studies included in this review were randomized to receive Yupingfeng formula combined with Western medications in comparison with Western medications. In general, the methodological quality of the included trials was poor. The results of this systematic review indicates that, compared with Western medications alone, the use of Yupingfeng formula, if combined with Western medications could significantly improve FEV1 (WMD = 0.30L; 95%CI: 0.19, 0.42), FEV1/FVC ratio (SMD = 0.69; 95%CI: 0.48, 0.91), 6MWD (WMD = 31.73m; 95% CI: 19.29, 44.17), and effective rate (RR = 1.24; 95% CI: 1.10, 1.41), and increase the serum levels of IgA (WMD = 0.25; 95%CI: 0.16, 0.34) and IgG (WMD = 1.10; 95%CI: 0.53, 1.68), but no difference was found in the serum IgE levels (WMD = 0.47; 95%CI: －0.32, 1.27) between the two groups. No serious adverse events were reported.Conclusions: Within the limitations of this systematic review, we may conclude that compared with Western medications alone, Yupingfeng formula, when combined with Western medications can provide more benefits for patients with stable COPD, without any serious adverse reactions being identified. However, these benefits need to be further confirmed through high-quality prospective placebo-controlled trials that should be strictly conducted in accordance with methodological principles and procedures.Key words: Yupingfeng formula; chronic obstructive pulmonary disease; Systematic revie

In-situ investigation of crystallization and structural evolution of a metallic glass in three dimensions at nano-scale

The crystallization behaviour of metallic glasses (MGs) has been investigated since the discovery of these important functional materials in order to optimize their synthesis procedures and improve their performances. Methods including powder X-ray diffraction and transmission electron microscopy are usually combined to characterize the crystalline structure in these “amorphous” materials. Until now, these methods, however, have failed to show the crystallization of individual crystals in three dimensions. In this work, in-situ Bragg coherent X-ray diffraction imaging (BCDI) reveals the growth and the strain variation of individual crystals in the Fe-based MGs during annealing. There is preferential growth along the surface of the MG sample particles during the crystal formation and fractal structure formation around the developing crystal surfaces; there is also strain relaxation happening from the inner parts to the surfaces of the developing crystals while cooling. The work leads to propose that during the crystallization of Fe-based MGs, the growth of the individual crystals follows a two-step procedure; and at higher temperature after the first crystallization period of the Fe-based MGs, the crystallization of α-Fe could be a competitive process between the growth of α-Fe crystals and the erosion from other elements

Heat transfer performance of LCS porous copper with different structural characteristics

© 2018 Trans Tech Publications, Switzerland. Porous metals are highly efficient media for active cooling and thermal management. However, the working fluid requires high pumping power to flow through the porous metals. This paper investigated the effect of structural characteristics (porosity, pore size and Cu particle size) on the heat transfer performance of porous Cu manufactured by Lost Carbonate Sintering (LCS). The heat transfer coefficient and pressure drop of porous Cu samples with porosity from 0.48 to 0.78, pore size from 250-1500 μm and Cu particle size from 75 to 841 μm were measured under the onedimensional forced convection condition using water. For all the samples with different pore sizes and Cu particle sizes, the optimum heat transfer coefficient was observed at a porosity between 0.6 and 0.7 and the pressure drop decreased with increasing porosity. The effect of pore size on heat transfer coefficient was not pronounced while pressure drop decreased with decreasing pore size. Samples with large Cu particles (841 μm) had higher optimum heat transfer coefficients and lower pressure drops. The coefficient of performance (CoP), which can be used to describe the overall heat transfer performance, increased with increasing porosity, decreasing pore size and increasing Cu particle size