143 research outputs found
Role of IGF1 and IGF1/VEGF on Human Mesenchymal Stromal Cells in Bone Healing: Two Sources and Two Fates.
In the repair of skeletal defects one of the major obstacles still remains an efficient vascularization of engineered scaffolds. We have examined the ability of insulin growth factor-1, alone or in association with vascular endothelial growth factor, to modulate the osteoblastic or endothelial commitment of periosteum-derived progenitor cells (PDPCs) and skin-derived multipotent stromal cells (S-MSCs). A selected gene panel for endothelial and osteoblastic differentiation as well as genes that can affect MAPK and PI3K/AKT signaling pathways were investigated. Moreover, gene expression profile of Sox2, Oct4, and Nanog transcription factors was assessed. Our results showed that under growth factor stimulation PDPCs are induced toward an osteoblastic differentiation, while S-MSCs seem to move along an endothelial phenotype. This different commitment seems to be linked to a diverse MAPK or PI3K/AKT signaling pathway activation. The analysis of genes for stemness evidenced that at least in PDPCs multipotency and differentiation could coexist. These results open interesting perspective for the development of innovative bone tissue engineering approaches based on a good network of angiogenesis and osteogenesis processes
Enhancement of gene targeting in human cells by intranuclear permeation of the Saccharomyces cerevisiae Rad52 protein
The introduction of exogenous DNA in human somatic cells results in a frequency of random integration at least 100-fold higher than gene targeting (GT), posing a seemingly insurmountable limitation for gene therapy applications. We previously reported that, in human cells, the stable over-expression of the Saccharomyces cerevisiae Rad52 gene (yRAD52), which plays the major role in yeast homologous recombination (HR), caused an up to 37-fold increase in the frequency of GT, indicating that yRAD52 interacts with the double-strand break repair pathway(s) of human cells favoring homologous integration. In the present study, we tested the effect of the yRad52 protein by delivering it directly to the human cells. To this purpose, we fused the yRAD52 cDNA to the arginine-rich domain of the TAT protein of HIV (tat11) that is known to permeate the cell membranes. We observed that a recombinant yRad52tat11 fusion protein produced in Escherichia coli, which maintains its ability to bind single-stranded DNA (ssDNA), enters the cells and the nuclei, where it is able to increase both intrachromosomal recombination and GT up to 63- and 50-fold, respectively. Moreover, the non-homologous plasmid DNA integration decreased by 4-fold. yRAD52tat11 proteins carrying point mutations in the ssDNA binding domain caused a lower or nil increase in recombination proficiency. Thus, the yRad52tat11 could be instrumental to increase GT in human cells and a ‘protein delivery approach’ offers a new tool for developing novel strategies for genome modification and gene therapy applications
A proteomics approach to the study of bleomycin- induced lung fibrosis
Idiopathic pulmonary fibrosis (IPF) is the most severe lung fibrotic form and very few pharmacological therapies are available at present. Key events in the onset of
the disease are the activation of fibroblasts to myofibroblasts and the production and release of extracellular matrix (ECM) and molecular factors.
Primary murine lung fibroblasts were isolated and their activation induced by Bleomycin (BLM) treatment. Extracellular Vesicles (EV) were isolated and protein
extracted. Released soluble proteins (Secretome) and EV-derived proteins were reduced, alkylated and trypsin digested. A nano-LC-MS/MS SWATHTM approach
was used for the proteomics analyses.
Specific proteins with a putative role in the transition from physiological to fibrotic conditions, such as several matrix metalloproteinases (MMPs), osteopontin
(OPN), chitinase-3-like protein1 (CHI3L1) and CD44 resulted differentially released from BLM-treated fibroblasts as compared with untreated lung fibroblasts.
Our results provide further understanding of the pathophysiological features of lung fibrosis, and suggest specific target for pharmacological treatments
Adult mesenchymal stem cells for bone and cartilage engineering: effect of scaffold materials
Bone marrow is a useful cell source for skeletal tissue engineering approaches. In vitro differentiation of marrow mesenchymal stem cells (MSCs) to chondrocytes or osteoblasts can be induced by the addition of specific growth factors to the medium. The present study evaluated the behaviour of human MSCs cultured on various scaffolds to determine whether their differentiation can be induced by cell-matrix interactions. MSCs from bone marrow collected from the acetabulum during hip arthroplasty procedures were isolated by cell sorting, expanded and characterised by a flow cytometry system. Cells were grown on three different scaffolds (type I collagen, type I + II collagen and type I collagen + hydroxyapatite membranes) and analysed by histochemistry, immunohistochemistry and spectrophotometry (cell proliferation, alkaline phosphatase activity) at 15 and 30 days. Widely variable cell adhesion and proliferation was observed on the three scaffolds. MSCs grown on type I+II collagen differentiated to cells expressing chondrocyte markers, while those grown on type I collagen + hydroxyapatite differentiated into osteoblast-like cells. The study highlighted that human MSCs grown on different scaffold matrices may display different behaviours in terms of cell proliferation and phenotype expression without growth factor supplementation
Tau-dependent HDAC1 nuclear reduction is associated with altered VGluT1 expression
During AD pathology, Tau protein levels progressively increase from early pathological stages. Tau altered expression causes an unbalance of Tau subcellular localization in the cytosol and in the nuclear compartment leading to synaptic dysfunction, neuronal cell death and neurodegeneration as a consequence. Due to the relevant role of epigenetic remodellers in synaptic activity in physiology and in neurodegeneration, in particular of TRIM28 and HDAC1, we investigated the relationship between Tau and these epigenetic factors. By molecular, imaging and biochemical approaches, here we demonstrate that Tau altered expression in the neuronal cell line SH-SY5y does not alter TRIM28 and HDAC1 expression but it induces a subcellular reduction of HDAC1 in the nuclear compartment. Remarkably, HDAC1 reduced activity modulates the expression of synaptic genes in a way comparable to that observed by Tau increased levels. These results support a competitive relationship between Tau levels and HDAC1 subcellular localization and nuclear activity, indicating a possible mechanism mediating the alternative role of Tau in the pathological alteration of synaptic genes expression
INVESTIGATING THE SEISMIC RESPONSE OF URM WALLS WITH IRREGULAR OPENING LAYOUT THROUGH DIFFERENT MODELING APPROACHES
The façade and internal walls of unreinforced masonry (URM) buildings often present an irregular opening layout, due to architectural reasons or modifications to the structure, which make the expected seismic damage pattern less predictable a priori. Therefore, the discretization of the walls in structural components is not standardized, conversely to cases with a regular opening layout for which the available modeling methods are corroborated by seismic damage surveys reporting recurrent failure patterns. The structural component discretization is a relevant step for the code-conforming seismic assessment, typically based on comparing the internal forces and drifts of each component to strength criteria and drift thresholds. Therefore, the lack of well-established approaches can significantly influence the assessment. The issue is even more evident when the structural components must be identified a priori in the modeling stage, namely for equivalent frame models. The applicability of available methods for discretization of URM walls with irregular opening layout has been already investigated in literature, but a conclusive judgment requires further studies. In this context, this paper presents an overview of the preliminary results addressing the numerical modeling of this type of walls within the framework of the DPC-ReLUIS 2022-2024 project (Subtask 10.3), funded by the Italian Department of Civil Protection. The Subtask aims to propose consensus-based recommendations for researchers and practitioners which can contribute to harmonize the use of different modeling approaches. Seven research groups are involved in the research, adopting different modeling approaches and computer codes, but similar assumptions and the same analysis method (pushover) are used. The benchmark URM structure illustrated in the paper is a two-story wall from which four configurations with increasing irregularity of opening layout were derived. The results of four modeling approached are presented. Three of them reproduce the mechanical response of masonry at the material scale by means of FE models implemented in OpenSees, DIANA and Abaqus software, while the remaining approach describes the mechanical response of masonry at the macro-element scale in 3DMacro software. Results were compared in terms of capacity curves, predicted failure mechanisms and evolution of internal forces in piers. The adoption of consistent assumptions among the different approaches led to an overall agreement of predictions at both wall and pier scales, particularly in terms of damage pattern with higher concentration of damage at the ground story. Despite that, differences on the pushover curves have been highlighted. They are mainly due to some deviations of the internal forces in squat piers deriving from a complex load flow in these elements
Investigating the seismic response of URM walls with irregular opening layout through different modeling approaches
TThe façade and internal walls of unreinforced masonry (URM) buildings often present an
irregular opening layout, due to architectural reasons or modifications to the structure, which
make the expected seismic damage pattern less predictable a priori. Therefore, the
discretization of the walls in structural components is not standardized, conversely to cases
with a regular opening layout for which the available modeling methods are corroborated by
seismic damage surveys reporting recurrent failure patterns. The structural component
discretization is a relevant step for the code-conforming seismic assessment, typically based
on comparing the internal forces and drifts of each component to strength criteria and drift
thresholds. Therefore, the lack of well-established approaches can significantly influence the
assessment. The issue is even more evident when the structural components must be identified
a priori in the modeling stage, namely for equivalent frame models. The applicability of
available methods for discretization of URM walls with irregular opening layout has been
already investigated in literature, but a conclusive judgment requires further studies.
In this context, this paper presents an overview of the preliminary results addressing the
numerical modeling of this type of walls within the framework of the DPC-ReLUIS 2022-2024
project (Subtask 10.3), funded by the Italian Department of Civil Protection. The Subtask
aims to propose consensus-based recommendations for researchers and practitioners which
can contribute to harmonize the use of different modeling approaches. Seven research groups
are involved in the research, adopting different modeling approaches and computer codes,
but similar assumptions and the same analysis method (pushover) are used. The benchmark
URM structure illustrated in the paper is a two-story wall from which four configurations
with increasing irregularity of opening layout were derived. The results of four modeling
approached are presented. Three of them reproduce the mechanical response of masonry at
the material scale by means of FE models implemented in OpenSees, DIANA and Abaqus
software, while the remaining approach describes the mechanical response of masonry at the
macro-element scale in 3DMacro software. Results were compared in terms of capacity
curves, predicted failure mechanisms and evolution of internal forces in piers. The adoption
of consistent assumptions among the different approaches led to an overall agreement of
predictions at both wall and pier scales, particularly in terms of damage pattern with higher
concentration of damage at the ground story. Despite that, differences on the pushover curves
have been highlighted. They are mainly due to some deviations of the internal forces in squat
piers deriving from a complex load flow in these elements.DPC - Dipartimento della Protezione Civile, Presidenza del Consiglio dei Ministri(LA/P/0112/2020
Evaluation of natural foci of Panstrongylus megistus in a forest fragment in Porto Alegre, State of Rio Grande do Sul, Brazil
- …