Modulating Myeloid Immune Cell Migration Using Multivalently Presented Monosaccharide Ligands for Advanced Immunotherapy

Due to their importance for the outcome of the inflammatory response, the motile myeloid cells are a focus of novel treatment options. The interplay of selectins and their ligands with leukocytes and endothelial cells, which mediate endothelial attachment and transmigration of immune cells, can be modulated by selectin‐binding structures. Here, a library of selectin‐targeting ligands coupled to either gold, silver, iron oxide nanospheres, or quantum dots of 5–10 nm in size is used to systematically study their impact on immune cell motility. The multivalent presentation of the carbohydrate mimetics results in very low sub‐nanomolar binding to L ‐selectin. Using human primary monocytes, granulocytes, lymphocytes, and macrophages, it is shown that the ligands exhibit only minor effects on uptake, whereas the motility of leukocytes is critically affected as observed in migration assays evaluated by flow cytometry. The carbohydrate mimetic ring structure, sulfation, in particular, and the degree of ligand presentation, are constituents which cohere in this process. Specific carbohydrate ligands can thus selectively regulate leukocyte subsets. These data form the basis for advanced immunotherapy which inhibits the amplification of inflammation by restricting leukocyte influx to injured tissue sites. Furthermore, the targeting ligands may complement existing treatment options for inflammatory diseases

Polysulfate hemmen durch elektrostatische Wechselwirkungen die SARS-CoV-2-Infektion

Wir zeigen, dass negativ geladene Polysulfate durch elektrostatische Wechselwirkungen an das Spike-Protein von SARS-CoV-2 binden. Durch einen Plaquereduktionstest verglichen wir die hemmende Wirkung von Heparin, Pentosanpolysulfat, linearem Polyglycerolsulfat (LPGS) und hyperverzweigtem Polyglycerolsulfat (HPGS) gegengber SARSCoV-2. Dabei ist das synthetische LPGS der vielversprechendste Inhibitor mit IC50=67 μgmL-1 (ca. 1,6 μm) und zeigt eine 60-fach hçhere virushemmende Aktivität als Heparin (IC50=4084 μgmL-1) bei zugleich deutlich geringerer gerinnungshemmender Aktivität. Außerdem konnten wir durch Moleküldynamiksimulationen bestätigen, dass LPGS stärker an das Spike-Protein bindet als Heparin selbst und dass LPGS sogar noch stärker an die Spike-Proteine der neuen N501Yund E484K-Varianten bindet. Unsere Studien belegen, dass die Aufnahme von SARS-CoV-2 in Wirtzellen über elektrostatische Wechselwirkungen blockiert werden kann. Deshalb kann LPGS als vielversprechender Prototyp für das Design weiterer neuartiger viraler Inhibitoren von SARS-CoV-2 herangezogen werden

Polysulfates block SARS-CoV-2 uptake through electrostatic interactions

Here we report that negatively charged polysulfates can bind to the spike protein of SARS-CoV-2 via electrostatic interactions. Using a plaque reduction assay, we compare inhibition of SARS-CoV-2 by heparin, pentosan sulfate, linear polyglycerol sulfate (LPGS) and hyperbranched polyglycerol sulfate (HPGS). Highly sulfated LPGS is the optimal inhibitor, with a half-maximal inhibitory concentration (IC50) of 67 μg/mL (approx.1.6 μM). This synthetic polysulfates exhibit more than 60-fold higher virus inhibitory activity than heparin (IC50: 4084μg/mL), along with much lower anticoagulant activity. Furthermore, in molecular dynamics simulations, we verified that LPGS can bind stronger to the spike protein than heparin, and that LPGS can interact even morewith the spike protein of the new N501Y and E484K variants. Our study demonstrates that the entry of SARS-CoV-2 into host cells can be blocked via electrostatic interaction, therefore LPGS can serve as a blueprint for the design of novel viral inhibitors of SARS-CoV-2

Polysulfates block SARS‐CoV‐2 uptake through electrostatic interactions

Here we report that negatively charged polysulfates can bind to the spike protein of SARS-CoV-2 via electrostatic interactions. Using a plaque reduction assay, we compare inhibition of SARS-CoV-2 by heparin, pentosan sulfate, linear polyglycerol sulfate (LPGS) and hyperbranched polyglycerol sulfate (HPGS). Highly sulfated LPGS is the optimal inhibitor, with a half-maximal inhibitory concentration (IC50) of 67 μg/mL (approx. 1.6 μM). This synthetic polysulfates exhibit more than 60-fold higher virus inhibitory activity than heparin (IC50: 4084 μg/mL), along with much lower anticoagulant activity. Furthermore, in molecular dynamics simulations, we verified that LPGS can bind stronger to the spike protein than heparin, and that LPGS can interact even more with the spike protein of the new N501Y and E484K variants. Our study demonstrates that the entry of SARS-CoV-2 into host cells can be blocked via electrostatic interaction, therefore LPGS can serve as a blueprint for the design of novel viral inhibitors of SARS-CoV-2

Description and applications of a 3D mathematical model for horizontal anode baking furnaces

In aluminum industry, carbon anodes are consumed continuously during alumina reduction in the electrolysis cells. Anodes are made of calcined coke, butt, and recycled anode particles and pitch as the binder. Green anodes are baked in large furnaces where they attain specific properties in terms of density, mechanical strength, and electrical conductivity. Baking is an important and costly step in carbon anode production. The proper operation of the furnace provides the required anode quality. Mathematical modeling allows the prediction of the heating profile of anodes during baking. Taking into account all the relevant phenomena, a 3D transient mathematical model was developed to simulate the different stages of the baking process in the furnace. The predictions give a detailed view of the furnace operation and performance. In this article, the 3D model is described, and the results on the impact of various parameters on furnace behavior are presented

A dynamic process model for predicting the performance of horizontal anode baking furnaces

Anode manufacturing is an important step during the production of primary aluminum, and baking is the costliest stage of the anode manufacturing process. The industrial challenge resides in obtaining a good anode quality while keeping the energy consumption, environmental emissions, and cost to minimum. A dynamic process model has been developed for horizontal anode baking furnaces. It covers all important phenomena such as fuel combustion, generation and combustion of volatiles (tar, methane, and hydrogen), air infiltration, and heat losses to the atmosphere and the foundation. The model was built using two coupled sub-models of the flue and the pit and was validated using the plant data. It simulates the dynamic behavior of the furnace and gives a prediction of its operation and performance. In this article, the modelling approach will be described, and the results of a number of case studies will be presented

Dendrimers as anti-inflammatory agents

Dendrimers constitute an intriguing class of macromolecules which find applications in a variety of areas including biology. These hyperbranched macromolecules with tailored backbone and surface groups have been extensively investigated as nanocarriers for gene and drug delivery, by molecular encapsulation or covalent conjugation. Dendrimers have provided an excellent platform to develop multivalent and multifunctional nanoconjugates incorporating a variety of functional groups including drugs which are known to be anti-inflammatory agents. Recently, dendrimers have been shown to possess anti-inflammatory properties themselves. This unexpected and intriguing discovery has provided an additional impetus in designing novel active pharmaceutical agents. In this review, we highlight some of the recent developments in the field of dendrimers as nanoscale anti-inflammatory agents

The interaction of protein kinase C isozymes α, ι, and θ with the cytoplasmic domain of L-selectin is modulated by phosphorylation of the receptor

The leukocyte adhesion molecule L-selectin has an important role in the initial steps of leukocyte extravasation during inflammation and lymphocyte homing. Its cytoplasmic domain is involved in signal transduction after L-selectin cross-linking and in the regulation of receptor binding activity in response to intracellular signals. However, the signaling events occurring at the level of the receptor are largely unknown. This study therefore addressed the question of whether protein kinases associate with the cytoplasmic domain of the receptor and mediate its phosphorylation. Using a glutathione S-transferase fusion protein of the L-selectin cytoplasmic domain, we isolated a kinase activity from cellular extracts of the human leukemic Jurkat T-cell line that phosphorylated L-selectin on serine residues. This kinase showed characteristics of the protein kinase C (PKC) family. Moreover, the Ca2+-independent PKC isozymes θ and ι were found associated with the cytoplasmic domain of L-selectin. Pseudosubstrate inhibitors of these isozymes abolished phosphorylation of the cytoplasmic domain, demonstrating that these kinases are responsible for the phosphorylation. Analysis of proteins specifically bound to the phosphorylated cytoplasmic tail of L-selectin revealed that PKCα and -θ are strongly associated with the phosphorylated cytoplasmic domain of L-selectin. Binding of these isozymes to L-selectin was also found in intact cells after phorbol ester treatment inducing serine phosphorylation of the receptor. Furthermore, stimulation of Jurkat T-cells by CD3 cross-linking induced association of PKCα and -θ with L-selectin, indicating a role of these kinases in the regulation of L-selectin through the T-cell receptor complex. The phosphorylation-regulated association of PKC isozymes with the cytoplasmic domain of L-selectin indicates an important role of this kinase family in L-selectin signal transduction