72 research outputs found
Pengaruh Lingkungan Organisasi terhadap Kinerja Pegawai (suatu Studi di Kantor Kecamatan Tuminting Kota Manado)
The internal environment is the overall factor in the organization and the activities of theorganization. In the study are two main problems, namely the environmental conditions and the level ofemployee performance in organizations. The study tries to show the influence of the organizationalenvironment on employee performance in Tuminting district, Manado city . This study uses a quantitativeapproach with descriptions and explanations. Data sources or respondents of this study are all employeesof the district office Tuminting, numbering 32 people. Data was collected through a questionnaire andengineering survey using observation techniques. Analysis of the data involved using a simple correlationanalysis technique and simple regression. The results of the data analysis: 1.the environmentalorganization at the district offices in Tuminting is based on the opinions of respondents in the categoriesand are likely to be high or medium.2.Employee performance is likely to be low or medium.3.Theregression coefficient of the variable work environment on employee performance is positive andsignificant and the correlation coefficient of determination is also. Based on the results of data analysis itmay be concluded that the environmental organization, working environment is significantly positive inthe office at Tuminting, Manado city. From the conclusion of the study it is suggested that theorganization's leaders, in particular the leader of Tuminting district, are able to create conditions of acondusive working environment and stimulate morale of the employees and also the need for concreteefforts of local governments to create the conditions for a better working environment
Analisis Strategi dalam Meningkatkan Pembangunan pada Sektor Pertanian di Desa Tondegesan Induk Kecamatan Kawangkoan Kabupaten Minahasa
The agricultural sector is the dominant sector of national and regional development regarding the role of agriculture in employment, income generation and social welfare, economic growth and the creation Domestic gross regional product (GDP ) and foreign exchange through exports. Therefore, the research is the analysis of Strategy to Improve Agricultural Sector Development In Tondegesan In the village of the District Parent Kawangkoan Minahasa .This research used Qualitative Research Methods using data analysis techniques SWOT. Analysis of internal factors produce factors strengths and weaknesses. Strengths factors is fertile Potential Land Resources, Commodity excels as a primary requirement, Human Resources 75,06% is Farmer, Having a farmer institution, farmer group businesses management, and Strategy of market place. Weakness factors is Lack of support for government benefits, Farmers have limited access to capital, lack of control from PPL, Lack of Knowledge and Skills Farmer, limited facilities and infrastructure, Weak Agricultural Technology. External factors generating opportunities and threats factors. Opportunities factors is market needs, The development of the fertilizer industry, agroindustrial production machine tool industry, and Technological Development. Treatments Factors is capital through bank loans, Price of Fluctuations, Fluktuasi, and trade globalization.Based on the SWOT analysis, set out six strategies, is Increased production and productivity in the agricultural sector, increases the potential of human resources, and market information functions, Empowerment agricultural institutions, Increasing the added value and competitiveness of primary agricultural products, procurement of basic needs in agriculture, Creating policies in favour on farmers
Quaternary ferrites by batch and continuous flow hydrothermal synthesis: a comparison
Crystalline spinel quaternary ferrites MxZn1âxFe2O4 (M = Co, Ni; x = 0.2, 0.35, 0.5, 0.65, 0.8) were synthesised through conventional batch hydrothermal synthesis (HT) at 135 °C as well as via continuous flow hydrothermal synthesis (CHFS). The as prepared compounds were thoroughly characterised from a compositional (ICP-MS, XPS) and structural (XRD) point of view in order to compare the synthetic approaches and achieve a greater understanding of how the chosen approach influences the characteristics of the resulting spinel
How phyllosilicate mineral structure affects fault strength in Mg-rich fault systems
The clay mineralogy of fault gouges has important implications for the frictional properties of faults, often identified as a major factor contributing to profound fault weakness. This work compares the frictional strength of a group of Mgârich minerals common in the MgâAlâSiâO compositional space (talc, saponite, sepiolite, and palygorskite) by conducting triaxial frictional tests with water or argon as pore fluid. The studied minerals are chemically similar but differ in their crystallographic structure. Results show that fibrous Mgârich phyllosilicates are stronger than their planar equivalents. Frictional strength in this group of minerals is highly influenced by strength of the atomic bonds, continuity of water layers within the crystals, and interactions of mineral surfaces with water molecules, all of which are dictated by crystal structure. The formation and stability of the minerals studied are mainly controlled by small changes in pore fluid chemistry, which can lead to significant differences in fault strength
Determinants of Aortic Stiffness: 16-Year Follow-Up of the Whitehall II Study
Aortic stiffness is a strong predictor of cardiovascular disease endpoints. Cross-sectional studies have shown associations of various cardiovascular risk factors with aortic pulse wave velocity, a measure of aortic stiffness, but the long-term impact of these factors on aortic stiffness is unknown.In 3,769 men and women from the Whitehall II cohort, a wide range of traditional and novel cardiovascular risk factors were determined at baseline (1991-1993) and aortic pulse wave velocity was measured at follow-up (2007-2009). The prospective associations between each baseline risk factor and aortic pulse wave velocity at follow-up were assessed through sex stratified linear regression analysis adjusted for relevant confounders. Missing data on baseline determinants were imputed using the Multivariate Imputation by Chained Equations.Among men, the strongest predictors were waist circumference, waist-hip ratio, heart rate and interleukin 1 receptor antagonist, and among women, adiponectin, triglycerides, pulse pressure and waist-hip ratio. The impact of 10 centimeter increase in waist circumference on aortic pulse wave velocity was twice as large for men compared with women (men: 0.40 m/s (95%-CI: 0.24;0.56); women: 0.17 m/s (95%-CI: -0.01;0.35)), whereas the opposite was true for the impact of a two-fold increase in adiponectin (men: -0.30 m/s (95%-CI: -0.51;-0.10); women: 0.61 m/s (95%-CI: -0.86;-0.35)).In this large prospective study, central obesity was a strong predictor of aortic stiffness. Additionally, heart rate in men and adiponectin in women predicted aortic pulse wave velocity suggesting that strategies to prevent aortic stiffening should be focused differently by sex
Tectono-stratigraphic response of the Sandino Forearc Basin (N-Costa Rica and W-Nicaragua) to episodes of rough crust and oblique subduction
The southern Central American active margin is a world-class site where past and
present subduction processes have been extensively studied. Tectonic erosion/accretion
and oblique/orthogonal subduction are thought to alternate in space and time
along the Middle American Trench. These processes may cause various responses
in the upper plate, such as uplift/subsidence, deformation, and volcanic arc migration/
shut-off. We present an updated stratigraphic framework of the Late Cretaceousâ
Cenozoic Sandino Forearc Basin (SFB) which provides evidence of
sedimentary response to tectonic events. Since its inception, the basin was predominantly
filled with deep-water volcaniclastic deposits. In contrast, shallow-water
deposits appeared episodically in the basin record and are considered as tectonic
event markers. The SFB stretches for about 300 km and varies in thickness from
5 km (southern part) to about 16 km (northern part). The drastic, along-basin, thickness
variation appears to be the result of (1) differential tectonic evolutions and (2)
differential rates of sediment supply. (1) The northern SFB did not experience major
tectonic events. In contrast, the reduced thickness of the southern SFB (5 km) is the
result of at least four uplift phases related to the collision/accretion of bathymetric
reliefs on the incoming plate: (i) the accretion of a buoyant oceanic plateau (Nicoya
Complex) during the middle Campanian; (ii) the collision of an oceanic plateau (?)
during the late DanianâSelandian; (iii) the collision/accretion of seamounts during
the late Eoceneâearly Oligocene; (iv) the collision of seamounts and ridges during
the PlioceneâHolocene. (2) The northwestward thickening of the SFB may have
been enhanced by high sediment supply in the Fonseca Gulf area which reflects
sourcing from wide, high relief drainage basins. In contrast, sedimentary input has
possibly been lower along the southern SFB, due to the proximity of the narrow,
lowland isthmus of southern Central America. Moreover, two phases of strongly
oblique subduction affected the margin, producing strike-slip faulting in the forearc
basin: (1) prior to the Farallon Plate breakup, an Oligocene transpressional phase
caused deformation and uplift of the basin depocenter, triggering shallowing-upward
of the Nicaraguan Isthmus in the central and northern SFB; (2) a PleistoceneâHolocene transtensional phase drives the NW-directed motion of a forearc sliver
and reactivation of the graben-bounding faults of the late Neogene Nicaraguan
Depression. We discuss arguments in favour of a Pliocene development of the
Nicaraguan Depression and propose that the Nicaraguan Isthmus, which is the
apparent rift shoulder of the depression, represents a structure inherited from the Oligocene
transpressional phase
Fatigue behavior of an Off-highway axle subjected to a variable amplitude strain-based load spectrum derived from field tests
On the use of specimens for gear bending fatigue design
ISO 6336 Standard presents different methods to design cylindrical gears against bending fatigue.. The Standard allows the use of fatigue data obtained from plain and notched specimens to design gears, but it suggests a more experienced approach based on data obtained on reference gears. In this paper, the accuracy of the different methods was verified against test data. The estimation of material notch sensitivity was improved using experimental data obtained on specimens. After calibrating the notch sensitivity factors, the specimen-based methods proved to be as accurate as the method based on reference gears
- âŠ