Magellanic Cloud Periphery Carbon Stars IV: The SMC

The kinematics of 150 carbon stars observed at moderate dispersion on the periphery of the Small Magellanic Cloud are compared with the motions of neutral hydrogen and early type stars in the Inter-Cloud region. The distribution of radial velocities implies a configuration of these stars as a sheet inclined at 73+/-4 degrees to the plane of the sky. The near side, to the South, is dominated by a stellar component; to the North, the far side contains fewer carbon stars, and is dominated by the neutral gas. The upper velocity envelope of the stars is closely the same as that of the gas. This configuration is shown to be consistent with the known extension of the SMC along the line of sight, and is attributed to a tidally induced disruption of the SMC that originated in a close encounter with the LMC some 0.3 to 0.4 Gyr ago. The dearth of gas on the near side of the sheet is attributed to ablation processes akin to those inferred by Weiner & Williams (1996) to collisional excitation of the leading edges of Magellanic Stream clouds. Comparison with pre LMC/SMC encounter kinematic data of Hardy, Suntzeff, & Azzopardi (1989) of carbon stars, with data of stars formed after the encounter, of Maurice et al. (1989), and Mathewson et al. (a986, 1988) leaves little doubt that forces other than gravity play a role in the dynamics of the H I.Comment: 30 pages; 7 figures, latex compiled, 1 table; to appear in AJ (June 2000

Hamilton Standard Q-fan demonstrator dynamic pitch change test program, volume 1

Tests of a full scale variable pitch fan engine to obtain data on the structural characteristics, response times, and fan/core engine compatibility during transient changes in blade angle, fan rpm, and engine power is reported. Steady state reverse thrust tests with a take off nozzle configuration were also conducted. The 1.4 meter diameter, 13 bladed controllable pitch fan was driven by a T55 L 11A engine with power and blade angle coordinated by a digital computer. The tests demonstrated an ability to change from full forward thrust to reverse thrust in less than one (1) second. Reverse thrust was effected through feather and through flat pitch; structural characteristics and engine/fan compatibility were within satisfactory limits

Peeping at chaos: Nondestructive monitoring of chaotic systems by measuring long-time escape rates

One or more small holes provide non-destructive windows to observe corresponding closed systems, for example by measuring long time escape rates of particles as a function of hole sizes and positions. To leading order the escape rate of chaotic systems is proportional to the hole size and independent of position. Here we give exact formulas for the subsequent terms, as sums of correlation functions; these depend on hole size and position, hence yield information on the closed system dynamics. Conversely, the theory can be readily applied to experimental design, for example to control escape rates.Comment: Originally 4 pages and 2 eps figures incorporated into the text; v2 has more numerical results and discussion: now 6 pages, 4 figure

Coupling atmospheric mercury isotope ratios and meteorology to identify sources of mercury impacting a coastal urban‐industrial region near Pensacola, Florida, USA

Identifying the anthropogenic and natural sources of mercury (Hg) emissions contributing to atmospheric mercury on local, regional, and global scales continues to be a grand challenge. The relative importance of various direct anthropogenic emissions of mercury, in addition to natural geologic sources and reemission of previously released and deposited mercury, differs regionally and temporally. In this study, we used local‐scale, mesoscale, and synoptic‐scale meteorological analysis to couple the isotopic composition of ambient atmospheric mercury with potential sources of mercury contributing to a coastal urban‐industrial setting near a coal‐fired power plant in Pensacola, Florida, USA. We were able to broadly discern four influences on the isotopic composition of ambient atmospheric mercury impacting this coastal urban‐industrial region: (1) local to regional urban‐industrial anthropogenic emissions (mean δ202Hg = 0.44 ± 0.05‰, 1SD, n = 3), (2) marine‐influenced sources derived from the Gulf of Mexico (mean δ202Hg = 0.77 ± 0.15‰, 1SD, n = 4), (3) continental sources associated with north‐northwesterly flows from within the planetary boundary layer (mean δ202Hg = 0.65 ± 0.04‰, 1SD, n = 3), and (4) continental sources associated with north‐northeasterly flows at higher altitudes (i.e., 2000 m above ground level; mean δ202Hg = 1.10 ± 0.21‰, 1SD, n = 8). Overall, these data, in conjunction with previous studies, suggest that the background global atmospheric mercury pool is characterized by moderately positive δ202Hg values; that urban‐industrial emissions drive the isotopic composition of ambient atmospheric mercury toward lower δ202Hg values; and that air‐surface exchange dynamics across vegetation and soils of terrestrial ecosystems drive the isotopic composition of ambient atmospheric mercury toward higher positive δ202Hg values. The data further suggest that mass‐independent fractionation (MIF) of both even‐mass‐ and odd‐mass‐number isotopes, likely generated by photochemical reactions in the atmosphere or during reemission from terrestrial and aquatic ecosystems, can be obscured by mixing with anthropogenic emissions having different MIF signatures.Key PointsIsotopic composition of TGM differed among meteorologically identified sourcesBackground atmospheric TGM displayed moderately positive δ202Hg valuesAnthropogenic emissions drive TGM isotopic composition to lower δ202Hg valuesPeer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/136364/1/gbc20349-sup-0001-Supplementary.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/136364/2/gbc20349.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/136364/3/gbc20349_am.pd

Media outlets and their moguls: why concentrated individual or family ownership is bad for editorial independence

This article investigates the levels of owner influence in 211 different print and broadcast outlets in 32 different European media markets. Drawing on the literature from industrial organisation, it sets out reasons why we should expect greater levels of influence where ownership of individual outlets is concentrated; where it is concentrated in the hands of individuals or families; and where ownership groups own multiple outlets in the same media market. Conversely, we should expect lower levels of influence where ownership is dispersed between transnational companies. The articles uses original data on the ownership structures of these outlets, and combines it with reliable expert judgments as to the level of owner influence in each of the outlets. These hypotheses are tested and confirmed in a multilevel regression model of owner influence. The findings are relevant for policy on ownership limits in the media, and for the debate over transnational versus local control of media

Au-Ag template stripped pattern for scanning probe investigations of DNA arrays produced by Dip Pen Nanolithography

We report on DNA arrays produced by Dip Pen Nanolithography (DPN) on a novel Au-Ag micro patterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting a multi-instrument and multi-technique local detection and analysis. Moreover the smooth surface of the Au squares (abput 5-10 angstrom roughness) allows to be sensitive to the hybridization of the oligonucleotide array with label-free target DNA. Our Au-Ag substrates, combining the retrieving capabilities of the patterned surface with the smoothness of the template stripped technique, are candidates for the investigation of DPN nanostructures and for the development of label free detection methods for DNA nanoarrays based on the use of scanning probes.Comment: Langmuir (accepted

Strengthening of the net section of steel elements under tensile loads with bonded CFRP strips

Abstract : The use of CFRP is increasingly common as a solution for the strengthening of structures, but the majority of research and applications have focused on the retrofit of concrete structures. The application of CFRP adhesively bonded to enhance the load carrying capacity of metallic elements has been widely studied in the aeronautical industry but is also a promising technique for the civil engineering area. This paper presents an experimental study to verify the effectiveness of the use of CFRP for the strengthening of the net section of steel elements under tensile loading. A series of tensile tests were conducted with different bond lengths, different number of layers and different surface preparation of steel elements in double lap joints and steel plates. The ultimate load, the failure mode and the effective bond length for CFRP strengthened specimens were determined. The results showed that using CFRP sheets for the strengthening against net area failure provides no gain on the ultimate state, provides a small gain at the elastic limit, and provides a larger gain if the designer accepts to increase the capacity from the elastic limit to the debondig limit

COMPARISON OF WHITE-CLAWED CRAYFISH POPULATIONS IN IRISH AND FRENCH STREAMS, WITH COMMENTS ON ITS FUTURE SURVIVAL IN EUROPE

White-clawed crayfish Austropotamobius pallipes (Lereboullet) populations remain strong in Ireland across a range of river and lake habitats, but the species is in decline elsewhere in Europe where it is sympatric with alien species. From comparison of published French and Irish studies, we suggest that in the changed European context the long-term health and survival of this species requires the maintenance of Ireland’s no-go status for non-indigenous crayfish

Remarks on Renormalization of Black Hole Entropy

We elaborate the renormalization process of entropy of a nonextremal and an extremal Reissner-Nordstr\"{o}m black hole by using the Pauli-Villars regularization method, in which the regulator fields obey either the Bose-Einstein or Fermi-Dirac distribution depending on their spin-statistics. The black hole entropy involves only two renormalization constants. We also discuss the entropy and temperature of the extremal black hole.Comment: 14 pages, revtex, no figure