50 research outputs found
a green synthesis of glycoluril derivatives in aqueous solution with recycle of the waste
Abstract A series of glycoluril derivatives have been synthesized in water at room temperature from urea and 1,2-dicarbonyl compounds in the presence of phosphoric anhydride. The reaction time is about 10 minutes using one mole of 1,2-dicarbonyl compound, three moles of urea, and half mole of P4O10, but the reaction occurs also, even if with longer reaction times, with very small amounts of P4O10 which is recovered at the end of reactions. In fact, several catalytic turnovers can be performed using the same reaction solution obtained after separation by simple filtration of the glycolurils
Safety by design: production of engineering surface modified nanomaterials
This PhD thesis focused on nanomaterial (NM) engineering for occupational health and safety, in the frame of the EU project “Safe Nano Worker Exposure Scenarios (SANOWORK)”. Following a safety by design approach, surface engineering (surface coating, purification process, colloidal force control, wet milling, film coating deposition and granulation) were proposed as risk remediation strategies (RRS) to decrease toxicity and emission potential of NMs within real processing lines.
In the first case investigated, the PlasmaChem ZrO2 manufacturing, the colloidal force control applied to the washing of synthesis rector, allowed to reduce ZrO2 contamination in wastewater, performing an efficient recycling procedure of ZrO2 recovered.
Furthermore, ZrO2 NM was investigated in the ceramic process owned by CNR-ISTEC and GEA-Niro; the spray drying and freeze drying techniques were employed decreasing NM emissivity, but maintaining a reactive surface in dried NM.
Considering the handling operation of nanofibers (NFs) obtained through Elmarco electrospinning procedure, the film coating deposition was applied on polyamide non-woven to avoid free fiber release. For TiO2 NF the wet milling was applied to reduce and homogenize the aspect ratio, leading to a significant mitigation of fiber toxicity.
In the Colorobbia spray coating line, Ag and TiO2 nanosols, employed to transfer respectively antibacterial or depolluting properties to different substrates, were investigated. Ag was subjected to surface coating and purification, decreasing NM toxicity. TiO2 was modified by surface coating, spray drying and blending with colloidal SiO2, improving its technological performance.
In the extrusion of polymeric matrix charged with carbon nanotube (CNTs) owned by Leitat, the CNTs used as filler were granulated by spray drying and freeze spray drying techniques, allowing to reduce their exposure potential.
Engineered NMs tested by biologists were further investigated in relevant biological conditions, to improve the knowledge of structure/toxicity mechanisms and obtain new insights for the design of safest NMs
Food contact of paper and plastic products containing SiO2, Cu-Phthalocyanine, Fe2O3, CaCO3: Ranking factors that control the similarity of form and rate of release
The paper industry is an important sector annually consuming kilotons of nanoforms and non-nanoforms of fillers and pigments. Fillers accelerate the rate of drying (less energy needed) and product cost (increasing the load of low-cost fillers). The plastic industry is another use sector, where coloristic pigments can be in nanoform, and many food containers are made of plastic. Use of paper to wrap both wet and dry food is consumer practice, but not always intended by producers. Here we compare the release behavior of different nano-enabled products (NEPs) by changing a) nanoform (NF) characteristics, b) NF load, c) the nano-enabled product (NEP) matrix, and d) food simulants. The ranking of these factors enables an assessment of food contact by concepts of analogy, specifically via the similarities of the rate and form of release in food during contact. Three types of matrices were used: Paper, plastic ((Polylactic Acid (PLA), Polyamide (PA6), and Polyurethane (PU)), and a paint formulation. Two nanoforms each of SiO2, Fe2O3, Cu-Phthalocyanine were incorporated, additionally to the conventional form of CaCO3 that is always contained in paper to reduce cellulose consumption. Tests were guided by the European Regulation EC 1935/2004 and EU 10/2011. No evidence of particle release was observed: the qualitative similarity (the form of release) was high regarding the food contact of all NEPs with embedded NFs. Quantitative similarity of releases depended primarily on the NEP matrix, as this controls the penetration of the simulant fluid into the NEP. The solubility of the NF and impurities in the simulant fluid was the second decisive factor, as dissolution of the NF inside the NEP is the main mechanism of release. This led to complete removal of CaCO3 in acidic medium, whereas Fe and Si signals remained in the paper, consistent with the low release rates in an ionic form. In our set of 16 NEPs, only one NEP showed a dependence on the REACH NF descriptors (substance, size, shape, surface treatment, crystallinity, impurities), specifically attributed to differences in soluble impurities, whereas for all others the substance of the nanoform was sufficient to predict a similarity of food contact release, without influences of size, shape, surface treatment and crystallinity
An in vitro strategy to assess mitigation of hazardous properties of engineered metal nanoparticles
The huge progress in the nanotechnology field has requested the production of increasingly
advanced engineered nanoparticles (NPs). In particular, metal-based advanced NPs are
widely used in several industrial applications. However, their potential effects on human
health during occupational exposure are still incompletely characterized thus far and
possible strategies to decrease their hazardous properties are not yet clearly defined. In this
project we are developing an in vitro approach to test the cytotoxic effects of metal-based
NPs, as derived from production lines or modified through coating with organic or inorganic
moieties. We have used two cell models widely employed in toxicological studies, the human
alveolar cell line A549 and the murine macrophage cell line RAW264.7, to avoid possible
limitations due to cell specific effects. Moreover, in order to evaluate the effectiveness of
mitigation approaches for NPs endowed with little acute cytotoxicity, additional endpoints,
alternative to viability, have also been assessed. Colloidal suspensions of Ag, TiO2 and ZrO2
NPs were tested as provided by industries or modified with SiO2 NPs or citrate used as
coating remediation agents. Heterocoagulation of opposite charged phases was applied in
order to promote the coating of pristine surfaces by modifying agents. Heterocoagulated sols
were obtained by ball milling sols of positive charged Ag, TiO2 and ZrO2 NPs with negative
charged SiO2 NPs or citrate ions. Modified samples, obtained by spray-drying and re-
dispersing in water the corresponding sols, were also obtained in order to compare
reactivity. Original and modified NPs were added to culture media starting from water
colloidal suspensions. Viability was determined with the resazurin method in a range of
doses from 2.5 to 80 nfg/cm2 (0.3125 to 20 g/cm2 for Ag NPs) of monolayer surface at three
experimental times (24, 48 and 72h). The expression of the inducible form of nitric oxide
synthase (Nos2), an indicator of macrophage activation and, hence, of pro-inflammatory
activity, was assessed with RT-PCR as an end-point alternative to viability.
Among the NPs tested, only Ag NP caused a significant loss of viability, with an IC50 of about
0.8 g/cm2 for Raw264.7 cells and 2.4 g/cm2 for A549 cells at the 24h-experimental time. In
a preliminary experiment, SiO2 NPs were demonstrated to have no significant effect on cell
viability. The comparison between original and SiO2-coated Ag NPs, performed in the same
experiment, suggested a coating-independent mitigation effect of bioreactivity exerted by the
spray drying procedure. However, once corrected for the actual Ag content of the spray-
dried powder, no significant difference was found in the IC50 values, indicating that neither
silica coating nor spray drying mitigate cytotoxicity. The effects on viability of original TiO2
and ZrO2 NPs were assessed using P25 Aeroxide TiO2 NPs as a reference material. These
materials did not affect significantly cell viability at any time point tested, so that it was not
possible to estimate IC50 values for either cell line. However, titania produced a clear-cut
induction of Nos2 expression in Raw264.7 cells, thus indicating their potential pro-
inflammatory activity. Citrate coating did not produce any significant attenuation of the
biological effect. In summary, these preliminary results showed no mitigating effect of the
surface modifications tested on the biological effects of the engineered NPs investigated.
However, the exploitation of this in vitro experimental strategy can be useful for the
preliminary assessment of the mitigation potential of surface modifications of both low-toxic
and high-toxic engineered NPs.
Supported by EU Grant NMP4-SL-2012-280716 (Sanowork Project
Hollow-fiber flow field-flow fractionation and multi-angle light scattering investigation of the size, shape and metal-release of silver nanoparticles in aqueous medium for nano-risk assessment
open11siAvailable online 22 November 2014
The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007–2013) through the project SANOWORK under Grant Agreement no. 280716. The HRTEM has been made available under the INSPIRE programme, funded by Irish Government's Programme for Research in Third Level Institutions, Cycle 4, National Development Plan 2007–2013, which is supported by European Union Structural Fund. Drs. Abbasi Gandhi and Vishnu Mogili of the University of Limerick are acknowledged for generating HRTEM data.Due to the increased use of silver nanoparticles in industrial scale manufacturing, consumer products and nanomedicine reliable measurements of properties such as the size, shape and distribution of these nano particles in aqueous medium is critical. These properties indeed affect both functional properties and biological impacts especially in quantifying associated risks and identifying suitable risk-mediation strategies. The feasibility of on-line coupling of a fractionation technique such as hollow-fiber flow field flow fractionation (HF5) with a light scattering technique such as MALS (multi-angle light scattering) is investigated here for this purpose. Data obtained from such a fractionation technique and its combination thereof with MALS have been compared with those from more conventional but often complementary techniques e.g. transmission electron microscopy, dynamic light scattering, atomic absorption spectroscopy, and X-ray fluorescence. The combination of fractionation and multi angle light scattering techniques have been found to offer an ideal, hyphenated methodology for a simultaneous size-separation and characterization of silver nanoparticles. The hydrodynamic radii determined by fractionation techniques can be conveniently correlated to the mean average diameters determined by multi angle light scattering and reliable information on particle morphology in aqueous dispersion has been obtained. The ability to separate silver (Ag+) ions from silver nanoparticles (AgNPs) via membrane filtration during size analysis is an added advantage in obtaining quantitative insights to its risk potential. Most importantly, the methodology developed in this article can potentially be extended to similar characterization of metal-based nanoparticles when studying their functional effectiveness and hazard potential.partially_openembargoed_20151122Marassi, Valentina; Casolari, Sonia; Roda, Barbara; Zattoni, Andrea; Reschiglian, Pierluigi; Panzavolta, Silvia; Tofail, Syed A.M.; Ortelli, Simona; Delpivo, Camilla; Blosi, Magda; Costa, Anna LuisaMarassi, Valentina; Casolari, Sonia; Roda, Barbara; Zattoni, Andrea; Reschiglian, Pierluigi; Panzavolta, Silvia; Tofail, Syed A.M.; Ortelli, Simona; Delpivo, Camilla; Blosi, Magda; Costa, Anna Luis
Safer by design strategies
Throughout the EU funded FP7 project GUIDENano, we are trying to control and monitor the evolution of nano-enable products during their lifecycle. Small alterations of the nanoparticle (NP) state may have critical consequences on the NP behaviour and performance. For this reason it is important to highlight the importance of an extensive and proper characterization to define the NP physico-chemical characteristics under several environmental conditions. Furthermore, this characterization is necessary to ensure that obtained results are reproducible and allow understanding the behaviour of the NP on biological systems. In this paper different strategies reported in the literature regarding the safety-by-design concept are summarized. Several strategies from the synthetic point of view that help us to modulate the main factors which determine the safety of nanomaterials are proposed
Occupational Exposure and Environmental Release : The Case Study of Pouring TiO2 and Filler Materials for Paint Production
Pulmonary exposure to micro- and nanoscaled particles has been widely linked to adverse health effects and high concentrations of respirable particles are expected to occur within and around many industrial settings. In this study, a field-measurement campaign was performed at an industrial manufacturer, during the production of paints. Spatial and personal measurements were conducted and results were used to estimate the mass flows in the facility and the airborne particle release to the outdoor environment. Airborne particle number concentration (1 x 10(3)-1.0 x 10(4) cm(-3)), respirable mass (0.06-0.6 mg m(-3)), and PM10 (0.3-6.5 mg m(-3)) were measured during pouring activities. In overall; emissions from pouring activities were found to be dominated by coarser particles >300 nm. Even though the raw materials were not identified as nanomaterials by the manufacturers, handling of TiO2 and clays resulted in release of nanometric particles to both workplace air and outdoor environment, which was confirmed by TEM analysis of indoor and stack emission samples. During the measurement period, none of the existing exposure limits in force were exceeded. Particle release to the outdoor environment varied from 6 to 20 g ton(-1) at concentrations between 0.6 and 9.7 mg m(-3) of total suspended dust depending on the powder. The estimated release of TiO2 to outdoors was 0.9 kg per year. Particle release to the environment is not expected to cause any major impact due to atmospheric dilutionPeer reviewe
Reproducibility of methods required to identify and characterize nanoforms of substances
•Nanoforms (NFs) of a substance may be distinguished from one another through differences in their physicochemical properties. When registering nanoforms of a substance for assessment under the EU REACH framework, five basic descriptors are required for their identification: composition, surface chemistry, size, specific surface area and shape. To make the risk assessment of similar NFs efficient, a number of grouping frameworks have been proposed, which often require assessment of similarity on individual physicochemical properties as part of the group justification. Similarity assessment requires an understanding of the achievable accuracy of the available methods. It must be demonstrated that measured differences between NFs are greater than the achievable accuracy of the method, to have confidence that the measured differences are indeed real. To estimate the achievable accuracy of a method, we assess the reproducibility of six analytical techniques routinely used to measure these five basic descriptors of nanoforms: inductively coupled plasma mass spectrometry (ICP-MS), Thermogravimetric analysis (TGA), Electrophoretic light scattering (ELS), Brunauer–Emmett–Teller (BET) specific surface area and transmission and scanning electron microscopy (TEM and SEM). Assessment was performed on representative test materials to evaluate the reproducibility of methods on single NFs of substances. The achievable accuracy was defined as the relative standard deviation of reproducibility (RSDR) for each method.
•Well established methods such as ICP-MS quantification of metal impurities, BET measurements of specific surface area, TEM and SEM for size and shape and ELS for surface potential and isoelectric point, all performed well, with low RSDR, generally between 5 and 20%, with maximal fold differences usually <1.5 fold between laboratories. Applications of technologies such as TGA for measuring water content and putative organic impurities, additives or surface treatments (through loss on ignition), which have a lower technology readiness level, demonstrated poorer reproducibility, but still within 5-fold differences. The expected achievable accuracy of ICP-MS may be estimated for untested analytes using established relationships between concentration and reproducibility, but this is not yet the case for TGA measurements of loss on ignition or water content. The results here demonstrate an approach to estimate the achievable accuracy of a method that should be employed when interpreting differences between NFs on individual physicochemical properties
A green synthesis of quinoxalines and 2,3-dihydropyrazines
Quinoxaline and dihydropyrazine derivatives were obtained in high yields by simple addition 1,2-diamines and 1,2-dicarbonyl compounds in water. In some cases, the products spontaneously precipitates from the reaction mixture, making it possible to recover and reuse the mother liquor for further condensations.
The very mild reaction conditions, the high yields of the
products and the absence of any catalyst make this
methodology an efficient and green route to quinoxalines and
dihydropyrazines