2,009 research outputs found
Optically Transparent Composite Material and Process for Preparing Same
Glass ribbon-reinforced transparent polymer composites which provide excellent optical transparency and a low distortion level over a wide temperature range while exhibiting superior mechanical properties as compared to non- reinforced polymer counterparts, and equivalent properties as compared to glass fiber-reinforced counterparts
JSC-1: Lunar Simulant of Choice for Geotechnical Applications and Oxygen Production
Lunar simulant JSC-1 was produced as the result of a workshop held in 1991 to evaluate the status of simulated lunar material and to make recommendations on future requirements and production of such material (McKay et al., 1991). JSC-1 was prepared from a welded tuff that was mined, crushed, and sized from the Pleistocene San Francisco volcanic field, northern Arizona. As the initial production of approxiamtely 12,300kgs is nearly depleted, new production has commenced. The mineralogy and chemical properties of JSC-1 are described in McKay et al. (1994) and Hill et al. (this volume); description of its geotechnical properties appears in Klosky et al. (1996). Although other lunar-soil simulants have been produced (e.g., MLS-1: Weiblen et al., 1990; Desai et al., 1992; Chua et al., 1994), they have not been as well standardized as JSC-I; this makes it difficult to standardize results from tests performed on these simulants. Here, we provide an overview of the composition, mineralogy, strength and deformation properties, and potential uses of JSC-1 and outline why it is presently the 'lunar simulant of choice' for geotechnical applications and as a proxy for lunar-oxygen production
Formation of Nanophase Iron in Lunar Soil Simulant for Use in ISRU Studies
For the prospective return of humans to the Moon and the extensive amount of premonitory studies necessary, large quantities of lunar soil simulants are required, for a myriad of purposes from construction/engineering purposes all the way to medical testing of its effects from ingestion by humans. And there is only a limited and precious quantity of lunar soil available on Earth (i.e., Apollo soils) - therefore, the immediate need for lunar soil simulants. Since the Apollo era, there have been several simulants; of these JSC-1 (Johnson Space Center) and MLS-1 (Minnesota Lunar Simulant) have been the most widely used. JSC-1 was produced from glassy volcanic tuff in order to approximate lunar soil geotechnical properties; whereas, MLS-1 approximates the chemistry of Apollo 11 high-Ti soil, 10084. Stocks of both simulants are depleted, but JSC-1 has recently gone back into production. The lunar soil simulant workshop, held at Marshall Space Flight Center in January 2005, identified the need to make new simulants for the special properties of lunar soil, such as nanophase iron (np-Fe(sup 0). Hill et al. (2005, this volume) showed the important role of microscale Fe(sup 0) in microwave processing of the lunar soil simulants JSC-1 and MLS-1. Lunar soil is formed by space weathering of lunar rocks (e.g., micrometeorite impact, cosmic particle bombardment). Glass generated during micrometeorite impact cements rock and mineral fragments together to form aggregates called agglutinates, and also produces vapor that is deposited and coats soil grains. Taylor et al. (2001) showed that the relative amount of impact glass in lunar soil increases with decreasing grain size and is the most abundant component in lunar dust (less than 20 micrometer fraction). Notably, the magnetic susceptibility of lunar soil also increases with the decreasing grain size, as a function of the amount of nanophase-sized Fe(sup 0) in impact-melt generated glass. Keller et al. (1997, 1999) also discovered the presence of abundant np-Fe(sup 0) particles in the glass patinas coating most soil particles. Therefore, the correlation of glass content and magnetic susceptibility can be explained by the presence of the np-Feo particles in glass: small particles contain relatively more np-Fe(sup 0) as glass coatings because the surface area versus mass ratio of the grain size is so increased. The magnetic properties of lunar soil are important in dust mitigation on the Moon (Taylor et al. 2005). Thus material simulating this property is important for testing mitigation methods using electromagnetic field. This np- Fe(sup 0) also produces a unique energy coupling to normal microwaves, such as present in kitchen microwave ovens. Effectively, a portion of lunar soil placed in a normal 2.45 GHz oven will melt at greater than 1200 C before your tea will boil at 100 C, a startling and new discovery reported by Taylor and Meek (2004, 2005). Several methods have been investigated in attempts to make nanophase-sized Feo dispersed within silicate glass; like in the lunar glass. We have been successful in synthesizing such a product and continue to improve on our recipe. We have performed extensive experimentation on this subject to date. Ultimately it will probably be necessary to add this np-Fe(sup 0) bearing silicate glass to lunar soil stimulant, like JSC-1, to actually produce the desired magnetic and microwave coupling properties for use in appropriate ISRU experimentation
Platinum-group element remobilisation and concentration in the Cliff chromitites of the Shetland Ophiolite Complex, Scotland
ABSTRACTThe ~492 Ma Shetland Ophiolite Complex contains an extensive mantle section, within which numerous podiform chromitite bodies formed during melt percolation in a supra-subduction zone setting. One of the Shetland ophiolite chromitite localities has an unusual style of platinum-group element (PGE) mineralization. Specifically, the Cliff chromitite suite has relatively high (>250 ppm) Pt plus Pd, compared to other chromitites in the Shetland Ophiolite Complex. In this study, we apply petrographic observation, mineral chemistry and novel X-ray microtomography data to elucidate the petrogenesis of PGE-bearing phases at Cliff. The combined datasets reveal that the PGE at Cliff have probably been fractionated by an As-rich fluid, concentrating Pt and Ir into visible (0.1–1 µm) platinum-group minerals (PGM) such as sperrylite and irarsite, respectively. The high (>1 ppm) bulk-rock concentrations of the other PGE (e.g. Os) in the Cliff chromitites suggests the presence of abundant fine-grained unidentified PGM in the serpentinized groundmass. The spatial association of arsenide phases and PGM with alteration rims on Cr-spinel grains suggests that the high Pt and Pd abundances at Cliff result from a late-stage low-temperature (e.g. 200–300°C) hydrothermal event. This conclusion highlights the potential effects that secondary alteration processes can have on modifying and upgrading the tenor of PGE deposits.</jats:p
Testing the chondrule-rich accretion model for planetary embryos using calcium isotopes
Understanding the composition of raw materials that formed the Earth is a
crucial step towards understanding the formation of terrestrial planets and
their bulk composition. Calcium is the fifth most abundant element in
terrestrial planets and, therefore, is a key element with which to trace
planetary composition. However, in order to use Ca isotopes as a tracer of
Earth's accretion history, it is first necessary to understand the isotopic
behavior of Ca during the earliest stages of planetary formation. Chondrites
are some of the oldest materials of the Solar System, and the study of their
isotopic composition enables understanding of how and in what conditions the
Solar System formed. Here we present Ca isotope data for a suite of bulk
chondrites as well as Allende (CV) chondrules. We show that most groups of
carbonaceous chondrites (CV, CI, CR and CM) are significantly enriched in the
lighter Ca isotopes ( = +0.1 to +0.93 permill) compared with
bulk silicate Earth ( = +1.05 0.04 permill, Huang et
al., 2010) or Mars, while enstatite chondrites are indistinguishable from Earth
in Ca isotope composition ( = +0.91 to +1.06 permill).
Chondrules from Allende are enriched in the heavier isotopes of Ca compared to
the bulk and the matrix of the meteorite ( = +1.00 to +1.21
permill). This implies that Earth and Mars have Ca isotope compositions that
are distinct from most carbonaceous chondrites but that may be like chondrules.
This Ca isotopic similarity between Earth, Mars, and chondrules is permissive
of recent dynamical models of planetary formation that propose a chondrule-rich
accretion model for planetary embryos.Comment: 39 pages, 5 figures, 2 tables 1 supplementary material (1 table
Understanding students’ motivation towards proactive career behaviours through goal-setting theory and the job demands–resources model
The graduate labour market is highly competitive but little is known about why students vary in their development of employability. This study contributes to the literature by applying goal-setting theory and the job demands–resources model to investigate how motivational processes influence students’ proactive career behaviours. We tested four hypotheses using structural equation modelling and moderation/mediation analysis using a nested model approach; 432 undergraduates from 21 UK universities participated in this cross-sectional study. The results showed that students higher in mastery approach had greater perceived employability mediated by two proactive career behaviours (skill development and network building). Students’ career goal commitment was associated with all four proactive career behaviours (career planning, skill development, career consultation and network building). Students’ academic and employment workloads did not negatively impact their proactive career behaviours. University tutors and career services should therefore encourage students to set challenging career goals that reflect mastery approach
Early Eocene Arctic volcanism from carbonate-metasomatized mantle
Melilitite, nephelinite, basanite, and alkali basalt, along with phonolite differentiates, form the Freemans Cove Complex (FCC) in the south-eastern extremity of Bathurst Island (Nunavut, Canada). New 40Ar/39Ar chronology indicates their emplacement between ~ 56 and ~ 54 million years ago within a localized extensional structure. Melilitites and nephelinites, along with phonolite differentiates, likely relate to the beginning and end phases of extension, whereas alkali basalts were emplaced during a main extensional episode at ~ 55 Ma. The melilitites, nephelinites, and alkali basalts show no strong evidence for significant assimilation of crust, in contrast to some phonolites. Partial melting occurred within both the garnet- and spinel-facies mantle and sampled sources with He, O, Nd, Hf, and Os isotope characteristics indicative of peridotite with two distinct components. The first, expressed in higher degree partial melts, represents a relatively depleted component (“A”; 3He/4He ~ 8 RA, εNdi ~ + 3 εHfi ~ + 7, γOsi ~ 0). The second was an enriched component (“B” 3He/4He + 70) sampled by the lowest degree partial melts and represents carbonate-metasomatized peridotite. Magmatism in the FCC shows that rifting extended from the Labrador Sea to Bathurst Island and reached a zenith at ~ 55 Ma, during the Eurekan orogeny. The incompatible trace-element abundances and isotopic signatures of FCC rocks indicate melt generation occurred at the base of relatively thin lithosphere at the margin of a thick craton, with no mantle plume influence. FCC melt compositions are distinct from other continental rift magmatic provinces worldwide, and their metasomatized mantle source was plausibly formed synchronously with emplacement of Cretaceous kimberlites. The FCC illustrates that the range of isotopic compositions preserved in continental rift magmas are likely to be dominated by temporal changes in the extent of partial melting, as well as by the timing and degree of metasomatism recorded in the underlying continental lithosphere
Leveraging High Resolution Signalized Intersection Data to Characterize Discharge Headway Distributions and Saturation Flow Rate Reliability
As highway systems become more congested, it becomes increasingly important to understand the reliability with which we can estimate important performance measures such as volume to capacity ratios, particularly as we move toward leveraging field infrastructure to obtain real-time performance measures. In 1947, Greenshields wrote a paper that characterized “green time consumed” by “car-in-line-number” that ultimately was called headway. Average headway is one of principles used by the highway capacity manual to estimate saturation flow rate at signalized intersections. However, the current analytical techniques calculate a deterministic value for saturation flow rate that does not consider the stochastic variation of saturation flow rate. This paper reviews techniques used to estimate saturation flow rate, and proposes enhanced calculation methods to group saturation flow rate estimates by queue length. Grouping saturation flow rate estimates by queue length provides a convenient framework to evaluate saturation flow rate reliability.
The inter-quartile range (25% - 75%) of saturation flow rates was calculated to be 1000vph based on Greenshields’ calculation techniques. Using the proposed enhanced calculation characterizing saturation flow rate, the inter-quartile range of saturation flow rate was shown to decrease from approximately 400 vph with 5 cars in a queue to 300 vph with 10 cars in queue. Because saturation flow rate is a fundamental input to volume-to-capacity performance measures, characterizing the stochastic variation of saturation flow rates provides a basic input for assessing how reliably one can estimate important performance measures such as volume-to-capacity ratios, as well as other performance measures that build upon volume-to-capacity ratios
Identification of mantle peridotite as a possible Iapetan ophiolite sliver in south Shetland, Scottish Caledonides
The Neoproterozoic Dunrossness Spilite Subgroup of south Shetland, Scotland, has been interpreted as a series of komatiitic and mafic lava flows formed in a marginal basin in response to Laurentian continental margin rifting. We show that ultramafic rocks previously identified as komatiites are depleted mantle peridotites that experienced seafloor hydrothermal alteration. The presence of positive Bouguer gravity and aeromagnetic anomalies extending from the Dunrossness Spilite Subgroup northward to the Shetland Ophiolite Complex suggests instead that these rocks may form part of an extensive ophiolite sliver, obducted during Iapetus Ocean closure in a forearc setting
- …