Evidence for suboxic nitrification in recent marine sediments

The classical scheme of biogeochemical zones (BGZ) is known to be an oversimplification of the microbial processes that occur in organic-rich marine sediments. Results from a coupled deployment of pore-water gel probes in Loch Duich, Scotland, provide direct evidence for rapid recycling within the iron reduction (FeR) and sulphate reduction (SR) zones. High resolution porewater profiles obtained using diffusive equilibrium in thin films (DET) gel probes found a nitrate peak at the boundary between the FeR and SR zones. This non-steady state feature is consistent with recycling of reduced N occurring throughout the FeR zone. Both conventional pore-water iron profiles and results from diffusive gradient in thin films (DGT) probes indicate that iron is solubilised and precipitated in rapid Fe/S recycling reactions throughout the SR zone. The presence of such complex recycling reactions confirms the oversimplification of the classical BGZ scheme

Inhibition of the ethylene response by 1-MCP in tomato suggests that polyamines are not involved in delaying ripening, but may moderate the rate of ripening or over-ripening

Ethylene initiates the ripening and senescence of climacteric fruit, whereas polyamines have been considered as senescence inhibitors. Ethylene and polyamine biosynthetic pathways share S-adenosylmethionine as a common intermediate. The effects of 1-methylcyclopropene (1-MCP), an inhibitor of ethylene perception, on ethylene and polyamine metabolism and associated gene expression was investigated during ripening of the model climacteric fruit, tomato (Solanum lycopersicum L.), to determine whether its effect could be via polyamines as well as through a direct effect on ethylene. 1-MCP delayed ripening for 8 d compared with control fruit, similarly delaying ethylene production and the expression of 1-aminocyclopropane- 1-carboxylic acid (ACC)-synthase and some ethylene receptor genes, but not that of ACC oxidase. The expression of ethylene receptor genes returned as ripening was reinitiated. Free putrescine contents remained low while ripening was inhibited by 1-MCP, but increased when the fruit started to ripen; bound putrescine contents were lower. The activity of the putrescine biosynthetic enzyme, arginine decarboxylase, was higher in 1-MCP-treated fruit. Activity of S-adenosylmethionine-decarboxylase peaked at the same time as putrescine levels in control and treated fruit. Gene expression for arginine decarboxylase peaked early in non-treated fruit and coincident with the delayed peak in putrescine in treated fruit. A coincident peak in the gene expression for arginase, S-adenosylmethionine-decarboxylase, and spermidine and spermine synthases was also seen in treated fruit. No effect of treatment on ornithine decarboxylase activity was detected. Polyamines are thus not directly associated with a delay in tomato fruit ripening, but may prolong the fully-ripe stage before the fruit tissues undergo senescence

Anoxic nitrification in marine sediments

Nitrate peaks are found in pore-water profiles in marine sediments at depths considerably below the conventional zone of oxic nitrification. These have been interpreted to represent nonsteady- state effects produced by the activity of nitrifying bacteria, and suggest that nitrification occurs throughout the anoxic sediment region. In this study, ΣNO3 peaks and molecular analysis of DNA and RNA extracted from anoxic sediments of Loch Duich, an organic-rich marine fjord, are consistent with nitrification occurring in the anoxic zone. Analysis of ammonia oxidiser 16S rRNA gene fragments amplified from sediment DNA indicated the abundance of autotrophic ammonia-oxidising bacteria throughout the sediment depth sampled (40 cm), while RT-PCR analysis indicated their potential activity throughout this region. A large non-steady-state pore-water ΣNO3 peak at ~21 cm correlated with discontinuities in this ammonia-oxidiser community. In addition, a subsurface nitrate peak at ~8 cm below the oxygen penetration depth, correlated with the depth of a peak in nitrification rate, assessed by transformation of 15N-labelled ammonia. The source of the oxidant required to support nitrification within the anoxic region is uncertain. It is suggested that rapid recycling of N is occurring, based on a coupled reaction involving Mn oxides (or possibly highly labile Fe oxides) buried during small-scale slumping events. However, to fully investigate this coupling, advances in the capability of high-resolution pore-water techniques are required

Development of selective, ultra-fast multiple co-sensitization to control dye loading in dye-sensitized solar cells

Enhancing the spectral response of dye-sensitized solar cells (DSC) is essential to increasing device efficiency and a key approach to achieve this is co-sensitization (i.e. the use of multiple dyes to absorb light from different parts of the solar spectrum). However, precise control of dye loading within DSC mesoporous metal oxide photo-anodes is non-trivial especially for very rapid processing (minutes). This is further complicated by dyes having very different partition (Kd) and molar extinction (ε) coefficients which strongly influence dye uptake and spectral response, respectively. Here, we present a highly versatile, ultra-fast (ca. 5 min) desorption and re-dyeing method for dye-sensitized solar cells which can be used to precisely control dye loading in photo-electrode films. This method has been successfully applied to re-dye, partially desorb and re-dye and selectively desorb and re-dye photo-electrodes using examples of a Ru-bipy dye (N719) and also organic dyes (SQ1 and D149) giving η up to 8.1% for a device containing the organic dye D149 and re-dyed with the Ru dye N719. The paper also illustrates how this method can be used to rapidly screen large numbers of dyes (and/or dye combinations) and also illustrates how it can also be used to selectively study dye loading

Hereditary complement factor I deficiency

Summary We describe four cases (from three families) of hereditary factor I deficiency, bringing the total number of cases now reported to 23. In one family there are two affected siblings: one has suffered recurrent pyogenic infections; the other is asymptomatic. In the second family, the patient had recurrent pyogenic infections and a self-limiting vasculitic illness; in the third family, the patient suffered recurrent pyogenic and neisserial infections. All four patients had markedly reduced concentrations of C3 in the serum (family 1 propositus: 28%; family 1 asymptomatic sibling: 15%; family 2: 31%; and family 3: 31 % normal human serum) which was in the form of C3b. Low lgG2 levels may occur in primary C3 deficiency, and reduction in lgG2 concentration to 1.14 g/l (normal: 1.30-5.90 g/l) was found in the patient from family 2. Using radioligand binding assays, we demonstrated increased binding of C3b to erythrocytes in a patient with factor I deficiency. This C3b could not be cleaved by autologous serum but could be cleaved by normal serum or purified factor I. We review and compare the published cases of C3, factor H and factor I deficienc

Australia : no price on cutting fire risk

No abstract available.http://www.nature.com/nature/index.htmlab201

Lines Missing Every Random Point

We prove that there is, in every direction in Euclidean space, a line that misses every computably random point. We also prove that there exist, in every direction in Euclidean space, arbitrarily long line segments missing every double exponential time random point.Comment: Added a section: "Betting in Doubly Exponential Time.

A study of dye anchoring points in half-squarylium dyes for dye-sensitized solar cells

This paper reports the synthesis of a series of new half-squaraine dyes (Hf-SQ) based around a common chromophoric unit consisting of linked indoline and squaric acid moieties. Carboxylate groups have been incorporated onto this core structure at four different points to study the influence of the anchoring group position on dye-sensitized solar cell (DSC) device performance. Dyes have been linked to TiO2 directly through the squaric acid moiety, through a modified squaric acid unit where a vinyl dicyano group has replaced one carbonyl, via an alkyl carboxylate attached to the indole N or through a carboxylate attached to the 4 position of a benzyl indole. Contact angle measurements have been studied to investigate the hydrophobic/hydrophilic properties of the dyes and the results have been compared to N719 and Z907. Full characterization data of all the dyes and synthetic intermediates are reported including single-crystal X-ray structural analysis for dye precursors; the indole (2a) and the half-squarylium esters (3a) and (6b), as well as the dyes (4c), (8) and (12). Dye colours range from yellow to red/brown in solution (λmax range from 430 to 476 nm) with ε ranging from 38 000 to 133 100 M−1 cm−1. The performance of the dyes in DSCs shows the highest efficiency yet reported for a Hf-SQ dye (η = 5.0%) for 1 cm2 devices with a spectral response ranging from 400 to 700 nm depending on the dye substituents. Co-sensitization of half-squarylium dye (7b) with squaraine dye (SQ2) resulted in a broader spectral response and an improved device efficiency (η = 6.1%). Density functional theory (DFT) calculations and cyclic voltammetry have been used to study the influence of linker position on dye HOMO–LUMO levels and the data has been correlated with I–V and EQE data

The problem of equilibration and the computation of correlation functions on a quantum computer

We address the question of how a quantum computer can be used to simulate experiments on quantum systems in thermal equilibrium. We present two approaches for the preparation of the equilibrium state on a quantum computer. For both approaches, we show that the output state of the algorithm, after long enough time, is the desired equilibrium. We present a numerical analysis of one of these approaches for small systems. We show how equilibrium (time)-correlation functions can be efficiently estimated on a quantum computer, given a preparation of the equilibrium state. The quantum algorithms that we present are hard to simulate on a classical computer. This indicates that they could provide an exponential speedup over what can be achieved with a classical device.Comment: 25 pages LaTex + 8 figures; various additional comments, results and correction

Existence of a Meromorphic Extension of Spectral Zeta Functions on Fractals

We investigate the existence of the meromorphic extension of the spectral zeta function of the Laplacian on self-similar fractals using the classical results of Kigami and Lapidus (based on the renewal theory) and new results of Hambly and Kajino based on the heat kernel estimates and other probabilistic techniques. We also formulate conjectures which hold true in the examples that have been analyzed in the existing literature