234 research outputs found
Recommended from our members
Comparing Neanderthal and Modern Human Long Bone Loading History from Cross-Sectional Geometry
We evaluate here efforts to compare archaic and modern human limb loading from long bone cross sectional. Recent studies find that cross sectional properties (I, J, Z) calculated from second moments of area (SMA) are similar in Neanderthals and early modern humans when adjusted for body mass and limb length, but differ in cross-sectional shape (e.g., Ix/Iy). These results suggest the two taxa had similar magnitudes but different patterns of locomotor loading. Such interpretations, however, assume that long bones are deformed like long, straight beams in pure bening, with neutral axes (NA) that run through the cross-sectional area centroids. We test this assumption experimentally using exercised sheep with rosette strain gauges mounted at three locations around the midshaft of the tibia and metatarsal. Calculation of normal strain distributions at the midshaft indicate that the NA does not run through the area centroid, largely because of the combined effects of bending and compression. In addition, orientation of the centroidal axes around which maximum SMAs (Imax) are calculated are unrelated to the planes in which the bines bend. Because SMAs are fourth-power functions, cross-sectional properties that assume the NA runs through the area centroid yield substantial errors in magnitude (up to 100%) compared to cross-sectional properties calculated around experimentally-determined NAs. The polar moment of area, J, is least subject to error. Applying these analyses to the hominoid fossil record indicates that SMAs neither support nor refute the hypothesis that Neanderthals and early modern humans had different magnitudes or patterns of loading.AnthropologyHuman Evolutionary Biolog
Recommended from our members
Trabecular Bone Orientation in Flexed Versus Extended Postures in Guinea Fowl: A Test of Wolff’s Law
Although bipedal locomotion is a hominin synapomorphy, disagreements persist about whether early hominin bipeds were capable of fully extended limb posture, or used a bent-knee, bent-hip gait. Several recent studies have used the orientation of trabecular bone in limb joints to infer posteral differences during bipedal locomotion between early bipeds and later Homo. There analyses depend on the assumption that the orientation of the trabeculae in joint corresponds to the orientation of compressive forces that are transmitted through the joints. However, the hypothesis that trabecular struts will differ in orientation because of differences in the orientation of loads they experience during growth have not been tested.
This study experimentally tests the hypothesis that there is a quantifiable relationship between the orientations of trabeculae and joint posture. The experiment included 16 guinea fowl (Numida melegris): 6 extended-posture runners, 6 flexed-posture runners, and 4 sedentary controls. The exercised animals ran 6 days per week at 1.9 mph for 15 minutes, on either a flat treadmill or a treadmill inclined to 20°. Kinematic and ground reaction force data collected as the birds moved on horizontal and inclined substrates confirm that the degree of flexion at the knee at toe-off is 10° greater when moving up inclines relative to level running. Micro-CT scans were analyzed using image analysis software to relate this difference to trabecular and subchondral bone morphology within the distal femoral epiphysis, including subchondral bone thickness, and trabecular orientation, number, thickness, volume, and connectivity.AnthropologyHuman Evolutionary Biolog
Electric Propulsion of a Different Class: The Challenges of Testing for MegaWatt Missions
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/97101/1/AIAA2012-3942.pd
Exercise-Induced Bone Formation Is Poorly Linked to Local Strain Magnitude in the Sheep Tibia
Functional interpretations of limb bone structure frequently assume that diaphyses adjust their shape by adding bone primarily across the plane in which they are habitually loaded in order to minimize loading-induced strains. Here, to test this hypothesis, we characterize the in vivo strain environment of the sheep tibial midshaft during treadmill exercise and examine whether this activity promotes bone formation disproportionately in the direction of loading in diaphyseal regions that experience the highest strains. It is shown that during treadmill exercise, sheep tibiae were bent in an anteroposterior direction, generating maximal tensile and compressive strains on the anterior and posterior shaft surfaces, respectively. Exercise led to significantly increased periosteal bone formation; however, rather than being biased toward areas of maximal strains across the anteroposterior axis, exercise-related osteogenesis occurred primarily around the medial half of the shaft circumference, in both high and low strain regions. Overall, the results of this study demonstrate that loading-induced bone growth is not closely linked to local strain magnitude in every instance. Therefore, caution is necessary when bone shaft shape is used to infer functional loading history in the absence of in vivo data on how bones are loaded and how they actually respond to loading
Mode Transitions in Hall Effect Thrusters
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106480/1/AIAA2013-4116.pd
Recommended from our members
Trabecular Bone in the Bird Knee Responds with High Sensitivity to Changes in Load Orientation
Wolff’s law of trajectorial orientation proposes that trabecular struts align with the orientation of dominant compressive loads within a joint. Although widely considered in skeletal biology, Wolff’s law has never been experimentally tested while controlling for ontogenetic stage, activity level, and species differences, all factors that may affect trabecular bone growth. Here we report an experimental test of Wolff’s law using a within-species design in age-matched subjects experiencing physiologically normal levels of bone strain. Two age-matched groups of juvenile guinea fowl Numida meleagris ran on a treadmill set at either 0° (Level group) or 20° (Incline group), for 10·min per day over a 45-day treatment period. Birds running on the 20° inclined treadmill used more-flexed knees than those in the Level group at midstance (the point of peak ground reaction force). This difference in joint posture enabled us to test the sensitivity of trabecular alignment to altered load orientation in the knee. Using a new radon transform-based method for measuring trabecular orientation, our analysis shows that the fine trabecular bone in the distal femur has a high degree of correspondence between changes in joint angle and trabecular orientation. The sensitivity of this response supports the prediction that trabecular bone adapts dynamically to the orientation of
peak compressive forces.Anthropolog
Effects of Smoking and Genotype on the PSR Index of Periodontal Disease in Adults Aged 18–49
Studies have found both genetic and environmental influences on chronic periodontitis. The purpose of this study was to examine the relationships among previously identified genetic variants, smoking status, and two periodontal disease-related phenotypes (PSR1 and PSR2) in 625 Caucasian adults (aged 18–49 years). The PSR Index was used to classify participants as affected or unaffected under the PSR1 and PSR2 phenotype definitions. Using logistic regression, we found that the form of the relationship varied by single nucleotide polymorphism (SNP): For rs10457525 and rs12630931, the effects of smoking and genotype on risk were additive; whereas for rs10457526 and rs733048, smoking was not independently associated with affected status once genotype was taken into consideration. In contrast, smoking moderated the relationships of rs3870371 and rs733048 with affected status such that former and never smokers with select genotypes were at increased genetic risk. Thus, for several groups, knowledge of genotype may refine the risk prediction over that which can be determined by knowledge of smoking status alone. Future studies should replicate these findings. These findings provide the foundation for the exploration of novel pathways by which periodontitis may occur
The Ion Propulsion System for the Solar Electric Propulsion Technology Demonstration Mission
The Asteroid Redirect Robotic Mission is a candidate Solar Electric Propulsion Technology Demonstration Mission whose main objectives are to develop and demonstrate a high-power solar electric propulsion capability for the Agency and return an asteroidal mass for rendezvous and characterization in a companion human-crewed mission. The ion propulsion system must be capable of operating over an 8-year time period and processing up to 10,000 kg of xenon propellant. This high-power solar electric propulsion capability, or an extensible derivative of it, has been identified as a critical part of an affordable, beyond-low-Earth-orbit, manned-exploration architecture. Under the NASA Space Technology Mission Directorate the critical electric propulsion and solar array technologies are being developed. The ion propulsion system being co-developed by the NASA Glenn Research Center and the Jet Propulsion Laboratory for the Asteroid Redirect Vehicle is based on the NASA-developed 12.5 kW Hall Effect Rocket with Magnetic Shielding (HERMeS0 thruster and power processing technologies. This paper presents the conceptual design for the ion propulsion system, the status of the NASA in-house thruster and power processing activity, and an update on flight hardware
Overview of the Development of the Advanced Electric Propulsion System (AEPS)
NASA is committed to the demonstration and application of high-power solar electric propulsion to meet its future mission needs. It is continuing to develop the 14 kW Advanced Electric Propulsion System (AEPS) under a project that recently completed an Early Integrated System Test (EIST) and System Preliminary Design Review (PDR). In addition, NASA is pursuing external partnerships in order to demonstrate Solar Electric Propulsion (SEP) technology and the advantages of high-power electric propulsion-based spacecraft. The recent announcement of a Power and Propulsion Element (PPE) as the first major piece of an evolvable human architecture to Mars has replaced the Asteroid Redirect Robotic Mission (ARRM) as the most likely first application of the AEPS Hall thruster system. This high-power SEP capability, or an extensible derivative of it, has been recognized as a critical part of a new, affordable human exploration architecture for missions beyond-low-Earth-orbit. This paper presents the status of AEPS development activities, and describes how AEPS hardware will be integrated into the PPE ion propulsion system
What drives security issuance decisions: Market timing, pecking order, or both?
We study market timing and pecking order in a sample of debt and equity issues and share repurchases of Canadian firms from 1998 to 2007. We find that only when firms are not financially constrained is there evidence that firms issue (repurchase) equity when their shares are overvalued (undervalued) and evidence that overvalued issuers earn lower postannouncement long-run returns. Similarly, we find that only when firms are not overvalued do they prefer debt to equity financing. These findings highlight an interaction between market timing and pecking order effects
- …