A study of the Io-associated plasma and neutral sodium cloud

Narrow-band interference filter images were obtained for the Io torus at the S II wavelengths of 6716, 6731 and at the wavelenght of the S III, 9532 spectrum. The purpose of these observations is to study the short term temporal behavior of the torus and to gain a better understanding of the systematic morphology of the torus. From these images, estimates were obtained for the electron and ion densities and ion temperatures as a function of longitude, latitude, radius from Jupiter, and time. From the analysis of images taken in 1983 and 1984, extremely sharp longitudinal variations in plasma density were detected, subcorotational velocities were measures in the torus plasma, the presence of an optical east-west brightness asymmetry was confirmed in the ion emissions, and longitudinal variations were detected in torus ion temperatures

Determining Warehouse Storage Location Assignments Using Clustering Analysis

The methodology used to assign products to a storage location in a warehouse can have a significant impact on the amount of time required to retrieve all of the items needed to fill an order. This paper describes a methodology that uses a clustering approach to determine storage assignments, where the metric of the strength of the relationship between two stock-keeping units (SKUs) is the number of times that the SKUs appear in the same order. Clustering is performed to maximize the frequency with which SKUs in the same cluster are ordered together. In testing, the clustering assignments were compared to a demand-based assignment strategy and showed a reduction of 20-30% in the number of aisles visited to retrieve orders

Identifying and Correcting Iron Deficiency in Field Crops.

2 p

Thermal/structural analysis of a transpiration cooled nozzle

The 8-foot High Temperature Tunnel (HTT) at LaRC is a combustion driven, high enthalpy blow down wind tunnel. In Mar. 1991, during check out of the transpiration cooled nozzle, pieces of platelets were found in the tunnel test section. It was determined that incorrect tolerancing between the platelets and the housing was the primary cause of the platelet failure. An analysis was performed to determine the tolerance layout between the platelets and the housing to meet the structural and performance criteria under a range of thermal, pressure, and bolt preload conditions. Three recommendations resulted as a product of this analysis

Growing good crops of oats in Missouri

Revision of Bulletin 644.Cover title.Includes bibliographical references

Monolithic Integration of a Plasmonic Sensor with CMOS Technology

Monolithic integration of nanophotonic sensors with CMOS detectors can transform the laboratory based nanophotonic sensors into practical devices with a range of applications in everyday life. In this work, by monolithically integrating an array of gold nanodiscs with the CMOS photodiode we have developed a compact and miniaturized nanophotonic sensor system having direct electrical read out. Doing so eliminates the need of expensive and bulky laboratory based optical spectrum analyzers used currently for measurements of nanophotonic sensor chips. The experimental optical sensitivity of the gold nanodiscs is measured to be 275 nm/RIU which translates to an electrical sensitivity of 5.4 V/RIU. This integration of nanophotonic sensors with the CMOS electronics has the potential to revolutionize personalized medical diagnostics similar to the way in which the CMOS technology has revolutionized the electronics industry

Soil, Water and Forage Analysis Laboratory Services.

4 p

Electrowetting on superhydrophobic SU-8 patterned surfaces

Electrowetting on micro-patterned layers of SU-8 photoresist with an amorphous Teflon (R) coating has been observed. The cosine of the contact angle is shown to be proportional to the square of the applied voltage for increasing bias. However, this does not apply below 40 V and we suggest that this may be explained in terms of penetration of fluid into the pattern of the surface. Assuming that the initial application of a bias voltage converts the drop from Cassie-Baxter to Wenzel regime, we have used this as a technique to estimate the roughness factor of the surface