286 research outputs found
A New Bi-Functional Derivative of Polyethylene Glycol as Molecular Carrier for Eugenol and Ibuprofen
Eugenol (EU) and ibuprofene (IBU) were covalently bound to a bi-functionalized PEG, used as molecular carrier of drugs and the release kinetics of the two bioactive molecules was studied in vitro in buffer solution at pH 7.4, in simulated gastric fluid and in mouse plasma. The hydrolysis studies showed a specific cleavage dependent on the pH of the medium and by the presence of proteolytic enzymes in mouse plasma. Studies in vitro on the release of the parent drug from this double prodrug in various media, indicate that the adduct may be sufficiently stable to pass intact the gastrointestinal tract and release into the circulation EU and IBU. Many advantages may be achieved by the synthesis of the prodrug EU-PEG-IBU related to synergistic analgesic and anti-inflammatory effects, to the reduction of the adverse reactions and the improvement of the chemical-physical properties of the parent drugs
An alternative encapsulation approach for production of active chitosan-propolis beads
Encapsulation is a promising technology to carry natural active substances, preventing their loss and maintaining their stability until use. Beads of chitosan-containing propolis have been prepared using a mono-pore filter device, which permits the encapsulation of natural polyphenols avoiding heat treatments, high shear rates and the use of toxic solvents. Beads proved to be active against Bacillis cereus, Escherichia coli, Listeria innocua, Pseudomonas fluorescens, Yarrovia lipolytica and three moulds strains; the highest effect was found against Staphylococcus aureus (MIC 0.8 mg beads mL-1). Results in liquid cultures of S. aureus evidenced that beads were able to release the flavonoids from propolis: the diffusion of the active compounds is a key factor in the exploitation of the microbial activity. The obtained chitosan-propolis beads represent an example of natural antimicrobial delivery system that could be used to prevent the growth of pathogenic/spoilage bacteria in food applications
Carrier-Induced Magnetic Circular Dichloism in the Magnetoresistive Pyrochlore Tl2Mn2O7
Infrared magnetic circular dichloism (MCD), or equivalently magneto-optical
Kerr effect, has been measured on the Tl2Mn2O7 pyrochlore, which is well known
for exhibiting a large magnetoresistance around the Curie temperature T_C ~ 120
K. A circularly polarized, infrared synchrotron radiation is used as the light
source. A pronounced MCD signal is observed exactly at the plasma edge of the
reflectivity near and below T_c. However, contrary to the conventional behavior
of MCD for ferromagnets, the observed MCD of Tl2Mn2O7 grows with the applied
magnetic field, and not scaled with the internal magnetization. It is shown
that these results can be basically understood in terms of a classical
magnetoplasma resonance. The absence of a magnetization-scaled MCD indicates a
weak spin-orbit coupling of the carriers in Tl2Mn2O7. We discuss the present
results in terms of the microscopic electronic structures of Tl2Mn2O7.Comment: 5 pages, 5 figures, submitted to J. Phys. Soc. Jp
Auditory dialog analysis and understanding by generative modelling of interactional dynamics
In the last few years, the interest in the analysis of human behavioral schemes has dramatically grown, in particular for the interpretation of the communication modalities called social signals. They represent well defined interaction patterns, possibly unconscious, characterizing different conversational situations and behaviors in general. In this paper, we illustrate an automatic system based on a generative structure able to analyze conversational scenarios. The generative model is composed by integrating a Gaussian mixture model and the (observed) influence model, and it is fed with a novel kind of simple low-level auditory social signals, which are termed steady conversational periods (SCPs). These are built on duration of continuous slots of silence or speech, taking also into account conversational turn-taking. The interactional dynamics built upon the transitions among SCPs provide a behavioral blueprint of conversational settings without relying on segmental or continuous phonetic features. Our contribution here is to show the effectiveness of our model when applied on dialogs classification and clustering tasks, considering dialogs between adults and between children and adults, in both flat and arguing discussions, and showing excellent performances also in comparison with state-of-the-art frameworks
Enhancing proteotoxic stress in leiomyosarcoma cells triggers mitochondrial dysfunctions, cell death, and antitumor activity in vivo
Leiomyosarcomas are rare and aggressive tumors characterized by a complex karyotype. Surgical resection with or without radiotherapy and chemotherapy is the standard curative treatment. Unfortunately, a high percentage of leiomyosarcomas recurs and metastasizes. In these cases, doxorubicin and ifosfamide represent the standard treatment but with low response rates. Here, we evaluated the induction of proteotoxic stress as a possible strategy to kill leiomyosarcoma cells in a therapeutic perspective. We show that aggressive leiomyosarcomas coexist with high levels of proteotoxic stress. As a consequence, we hypothesized that leiomyosarcoma cells are vulnerable to further increases of proteotoxic stress. The small compound 2c is a strong inducer of proteotoxic stress. In leiomyosarcoma cells, it triggers cell death coupled to a profound reorganization of the mitochondrial network. By using stimulated emission depletion microscopy, we have unveiled the existence of DIABLO/SMAC clusters that are modulated by 2c. Finally, we have engineered a new version of 2c linked to polyethylene glycol though a short peptide, named 2cPP. This new prodrug is specifically activated by proteases present in the tumor microenvironment. 2cPP shows a strong antitumor activity in vivo against leiomyosarcomas and no toxicity against normal cells
A non-invasive optical method for mapping temperature polarization in direct contact membrane distillation
Membrane Distillation (MD) is a thermal membrane process allowing for a theoretical 100% rejection of non-volatile compounds (i.e. ions, macromolecules, colloids, cells), whereas vapour molecules permeate through a micro-porous hydrophobic membrane due to a difference of vapour pressure established across the membrane-self. The effective driving force and, then, the vapour trans-membrane flux is affected by temperature polarization phenomena occurring in the boundary layers adjacent to the membrane. The temperature values at the membrane surface are usually difficult to measure and only recently some invasive techniques were adopted for this scope. The aim of this work was to introduce luminescent molecular probing as an innovative technology for non-invasive and in-situ monitoring of thermal polarization in MD. Tris(phenantroline)ruthenium(II) chloride (Ru(phen)3) was selected as temperature sensitive luminescent probe and immobilized in a flat poly(vinylidene fluoride) electrospun nanofibrous membrane (PVDF ENM). Experiments showed the key role of the Ru(phen)3 and Lithium Chloride (LiCl) in the preparation of homogeneous PVDF ENM due to their ionic nature that improved the electrical conductivity of the polymeric solution favouring the electrospinning. Furthermore, PVDF ENM showed a good performance in Direct Contact Membrane Distillation (DCMD) process. The immobilization of the molecular probe allowed to optically monitoring the membrane surface temperature during DCMD experiments. On the other hand, the employment of an IR-camera permitted the evaluation of the temperature of the bulk of liquid streams. Therefore, the combination of these two optical techniques enabled to evaluate, in a direct and non-invasive way, the thermal polarization along the membrane module during DCMD experiments
A multi-layered view of chemical and biochemical engineering
The contents of this article are based on the results of discussions the corresponding author has had since 2015 with the co-authors, who are members of academia and industry in Europe, on the scope and significance of chemical and biochemical engineering as a discipline. The result is a multi-layered view of chemical and biochemical engineering where the inner-layer deals with the fundamental principles and their application; the middle-layer deals with consolidation and expansion of the principles through a combination of science and engineering, leading to the development of sustainable technologies; and the outer-layer deals with integration of knowledge and collaboration with other disciplines to achieve a more sustainable society. Through this multi-layered view several important issues with respect to education, research and practice are highlighted together with current and future challenges and opportunities
Low-cost inorganic cation exchange membrane for electrodialysis: optimum processing temperature for the cation exchanger
The optimum temperature for fixing zirconium phosphate, obtained by precipitation, on a low-cost ceramic support was determined in order to obtain an inorganic cation exchange membrane for electrodialysis. Zirconium phosphate ion exchange capacity maximised between 450 and 550°C, thus it was considered the optimum processing temperature. The origin of this maximum was investigated by means of X-ray diffraction and termogravimetry and evolved gas analysis. Zirconium phosphate formation by precipitation in the porous network of the support was verified by scanning electron microscopy and energy dispersive X-ray analysis and mercury intrusion porosimetry. The membrane obtained after thermal treatment at 450°C displayed selectivity to the cations present in the spent rinse water of the chromium plating process. This property allows the recovery of chromium by removing the cations through the cation exchange ceramic membrane.The authors wish to express their gratitude to the Spanish Ministry of Science and Innovation for the support given to the research study (National Basic Research Programme, Ref. CTQ2008-06750-C02-02), as well as for the FPU student grant awarded to one of the authors (Ref.: AP2009-4409).Mestre, S.; Sales, S.; Palacios, M.; Lorente, M.; Mallol, G.; Pérez-Herranz, V. (2013). Low-cost inorganic cation exchange membrane for electrodialysis: optimum processing temperature for the cation exchanger. Desalination and Water Treatment. 51(16-18):3317-3324. https://doi.org/10.1080/19443994.2012.749177S331733245116-18Strathmann, H. (2010). Electromembrane Processes: Basic Aspects and Applications. Comprehensive Membrane Science and Engineering, 391-429. doi:10.1016/b978-0-08-093250-7.00048-7Drioli, E., & Fontananova, E. (s. f.). Integrated Membrane Processes. Membrane Operations, 265-283. doi:10.1002/9783527626779.ch12Strathmann, H. (s. f.). Fundamentals in Electromembrane Separation Processes. Membrane Operations, 83-119. doi:10.1002/9783527626779.ch5Alberti, G., Casciola, M., Costantino, U., & Levi, G. (1978). Inorganic ion exchange membranes consisting of microcrystals of zirconium phosphate supported by Kynar®. Journal of Membrane Science, 3(2), 179-190. doi:10.1016/s0376-7388(00)83021-5Semiat, R., & Hasson, D. (s. f.). Seawater and Brackish-Water Desalination with Membrane Operations. Membrane Operations, 221-243. doi:10.1002/9783527626779.ch10Bregman, J. ., & Braman, R. . (1965). Inorganic ion exchange membranes. Journal of Colloid Science, 20(9), 913-922. doi:10.1016/0095-8522(65)90064-4Bishop, H. K., Bittles, J. A., & Guter, G. A. (1969). Investigation of inorganic ion exchange membranes for electrodialysis. Desalination, 6(3), 369-380. doi:10.1016/s0011-9164(00)80226-xRajan, K. S., Boies, D. B., Casolo, A. J., & Bregman, J. . (1966). Inorganic ion-exchange membranes and their application to electrodialysis. Desalination, 1(3), 231-246. doi:10.1016/s0011-9164(00)80255-6INAMUDDIN, KHAN, S., SIDDIQUI, W., & KHAN, A. (2007). Synthesis, characterization and ion-exchange properties of a new and novel ‘organic–inorganic’ hybrid cation-exchanger: Nylon-6,6, Zr(IV) phosphate. Talanta, 71(2), 841-847. doi:10.1016/j.talanta.2006.05.042HELEN, M., VISWANATHAN, B., & MURTHY, S. (2007). Synthesis and characterization of composite membranes based on α-zirconium phosphate and silicotungstic acid. Journal of Membrane Science, 292(1-2), 98-105. doi:10.1016/j.memsci.2007.01.018Yu.S. Dzyaz’ko, V.N. Belyakov, N.V. Stefanyak, S.L. Vasilyuk, Anion-exchange properties of composite ceramic membranes containing hydrated zirconium dioxide, Russ. J. Appl. Chem. 79 (2006) 769–773.Linkov, V. ., & Belyakov, V. . (2001). Novel ceramic membranes for electrodialysis. Separation and Purification Technology, 25(1-3), 57-63. doi:10.1016/s1383-5866(01)00090-9Linkov, V. M., Dzyaz’ko, Y. S., Belyakov, V. N., & Atamanyuk, V. Y. (2007). Inorganic composite membranes for electrodialytic desaltination. Russian Journal of Applied Chemistry, 80(4), 576-581. doi:10.1134/s1070427207040118El-Sourougy, M. R., Zaki, E. E., & Aly, H. F. (1997). Transport characteristics of ceramic supported zirconium phosphate membrane. Journal of Membrane Science, 126(1), 107-113. doi:10.1016/s0376-7388(96)00273-6Sánchez, E., Mestre, S., Pérez-Herranz, V., & García-Gabaldón, M. (2005). Síntesis de membranas cerámicas para la regeneración de baños de cromado agotados. Boletín de la Sociedad Española de Cerámica y Vidrio, 44(6), 409-414. doi:10.3989/cyv.2005.v44.i6.340Sánchez, E., Mestre, S., Pérez-Herranz, V., Reyes, H., & Añó, E. (2006). Membrane electrochemical reactor for continuous regeneration of spent chromium plating baths. Desalination, 200(1-3), 668-670. doi:10.1016/j.desal.2006.03.475Alberti, G., Casciola, M., Costantino, U., & Vivani, R. (1996). Layered and pillared metal(IV) phosphates and phosphonates. Advanced Materials, 8(4), 291-303. doi:10.1002/adma.19960080405Alberti, G., & Torracca, E. (1968). Crystalline insoluble salts of polybasic metals - II. Synthesis of crystalline zirconium or titanium phosphate by direct precipitation. Journal of Inorganic and Nuclear Chemistry, 30(1), 317-318. doi:10.1016/0022-1902(68)80096-xTrobajo, C., Khainakov, S. A., Espina, A., & García, J. R. (2000). On the Synthesis of α-Zirconium Phosphate. Chemistry of Materials, 12(6), 1787-1790. doi:10.1021/cm0010093Alberti, G. (1978). Syntheses, crystalline structure, and ion-exchange properties of insoluble acid salts of tetravalent metals and their salt forms. Accounts of Chemical Research, 11(4), 163-170. doi:10.1021/ar50124a007Rajeh, A. O., & szirtes, L. (1995). Investigations of crystalline structure of gamma-zirconium phosphate. Journal of Radioanalytical and Nuclear Chemistry Articles, 196(2), 319-322. doi:10.1007/bf02038050Krogh Andersen, A. M., Norby, P., Hanson, J. C., & Vogt, T. (1998). Preparation and Characterization of a New 3-Dimensional Zirconium Hydrogen Phosphate, τ-Zr(HPO4)2. Determination of the Complete Crystal Structure Combining Synchrotron X-ray Single-Crystal Diffraction and Neutron Powder Diffraction. Inorganic Chemistry, 37(5), 876-881. doi:10.1021/ic971060hFeng, Y., He, W., Zhang, X., Jia, X., & Zhao, H. (2007). The preparation of nanoparticle zirconium phosphate. Materials Letters, 61(14-15), 3258-3261. doi:10.1016/j.matlet.2006.11.132Clearfield, A. (2000). INORGANIC ION EXCHANGERS, PAST, PRESENT, AND FUTURE. Solvent Extraction and Ion Exchange, 18(4), 655-678. doi:10.1080/07366290008934702Szirtes, L., Shakshooki, S. K., Szeleczky, A. M., & Rajeh, A. O. (1998). Thermoanalyncal Investigation of Some Layered Zirconium Salts and Their Various Derivatives I. Journal of Thermal Analysis and Calorimetry, 51(2), 503-515. doi:10.1007/bf03340188Al-Othman, A., Tremblay, A. Y., Pell, W., Letaief, S., Burchell, T. J., Peppley, B. A., & Ternan, M. (2010). Zirconium phosphate as the proton conducting material in direct hydrocarbon polymer electrolyte membrane fuel cells operating above the boiling point of water. Journal of Power Sources, 195(9), 2520-2525. doi:10.1016/j.jpowsour.2009.11.052Thakkar, R., Patel, H., & Chudasama, U. (2007). A comparative study of proton transport properties of zirconium phosphate and its metal exchanged phases. Bulletin of Materials Science, 30(3), 205-209. doi:10.1007/s12034-007-0036-3Jiang, P., Pan, B., Pan, B., Zhang, W., & Zhang, Q. (2008). A comparative study on lead sorption by amorphous and crystalline zirconium phosphates. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 322(1-3), 108-112. doi:10.1016/j.colsurfa.2008.02.035García-Gabaldón, M., Pérez-Herranz, V., García-Antón, J., & Guiñón, J. L. (2009). Use of ion-exchange membranes for the removal of tin from spent activating solutions. Desalination and Water Treatment, 3(1-3), 150-156. doi:10.5004/dwt.2009.453García-Gabaldón, M., Pérez-Herranz, V., García-Antón, J., & Guiñón, J. L. (2009). Effect of hydrochloric acid on the transport properties of tin through ion-exchange membranes. Desalination and Water Treatment, 10(1-3), 73-79. doi:10.5004/dwt.2009.69
- …