1,096 research outputs found
Low order harmonic cancellation in a grid connected multiple inverter system via current control parameter randomization
In grid connected multiple inverter systems, it is normal to synchronize the output current of each inverter to the common network voltage. Any current controller deficiencies, which result in low order harmonics, are also synchronized to the common network voltage. As a result the harmonics produced by individual converters show a high degree of correlation and tend to be additive. Each controller can be tuned to achieve a different harmonic profile so that harmonic cancellation can take place in the overall system, thus reducing the net current total harmonic distortion level. However, inter-inverter communication is required. This paper presents experimental results demonstrating an alternative approach, which is to arrange for the tuning within each inverter to be adjusted automatically with a random component. This results in a harmonic output spectrum that varies with time, but is uncorrelated with the harmonic spectrum of any other inverter in the system. The net harmonics from all the inverters undergo a degree of cancellation and the overall system yields a net improvement in power quality
Suppression of line voltage related distortion in current controlled grid connected inverters
The influence of selected control strategies on the level
of low-order current harmonic distortion generated by an inverter
connected to a distorted grid is investigated through a combination
of theoretical and experimental studies. A detailed theoretical
analysis, based on the concept of harmonic impedance, establishes
the suitability of inductor current feedback versus output
current feedback with respect to inverter power quality. Experimental
results, obtained from a purpose-built 500-W, three-level,
half-bridge inverter with an L-C-L output filter, verify the efficacy of inductor current as the feedback variable, yielding an
output current total harmonic distortion (THD) some 29% lower
than that achieved using output current feedback. A feed-forward
grid voltage disturbance rejection scheme is proposed as a means to
further reduce the level of low-order current harmonic distortion.
Results obtained from an inverter with inductor current feedback
and optimized feed-forward disturbance rejection show a THD of
just 3% at full-load, representing an improvement of some 53% on
the same inverter with output current feedback and no feed-forward
compensation. Significant improvements in THD were also
achieved across the entire load range. It is concluded that the use
of inductor current feedback and feed-forward voltage disturbance
rejection represent cost–effect mechanisms for achieving improved
output current quality
Elimination of subharmonics in direct look-up table (DLT) sine wave reference generators for low-cost microprocessor-controlled inverters
This paper investigates distortion of an inverter reference waveform generated using a direct look-up (DLT) algorithm. The sources of various distortion components are identified and the implications for application to variable speed drives and grid connected inverters are described. Harmonic and subharmonic distortion mechanisms are analyzed, and compared with experimental results. Analytical methods are derived to determine the occurrence of subharmonics, their number, frequencies and maximum amplitudes. A relationship is established identifying a discrete set of synthesizable frequencies which avoid sub-harmonic distortion as a function of look-up table length and a practical method for calculation of the look-up table indices, based on finite length binary representation, is presented. Real time experimental results are presented to verify the analytical derivations
Investigating Differences between Graphical and Textual Declarative Process Models
Declarative approaches to business process modeling are regarded as well
suited for highly volatile environments, as they enable a high degree of
flexibility. However, problems in understanding declarative process models
often impede their adoption. Particularly, a study revealed that aspects that
are present in both imperative and declarative process modeling languages at a
graphical level-while having different semantics-cause considerable troubles.
In this work we investigate whether a notation that does not contain graphical
lookalikes, i.e., a textual notation, can help to avoid this problem. Even
though a textual representation does not suffer from lookalikes, in our
empirical study it performed worse in terms of error rate, duration and mental
effort, as the textual representation forces the reader to mentally merge the
textual information. Likewise, subjects themselves expressed that the graphical
representation is easier to understand
Internal stresses in steel plate generated by shape memory alloy inserts
Neutron strain scanning was employed to investigate the internal stress fields in steel plate coupons with embedded prestrained superelastic NiTi shape memory alloy inserts. Strain fields in steel were evaluated at T = 21 °C and 130 °C on virgin coupons as well as on mechanically and thermally fatigued coupons. Internal stress fields were evaluated by direct calculation of principal stress components from the experimentally measured lattice strains as well as by employing an inverse finite element modeling approach. It is shown that if the NiTi inserts are embedded into the elastic steel matrix following a carefully designed technological procedure, the internal stress fields vary with temperature in a reproducible and predictable way. It is estimated that this mechanism of internal stress generation can be safely applied in the temperature range from −20 °C to 150 °C and is relatively resistant to thermal and mechanical fatigue. The predictability and fatigue endurance of the mechanism are of essential importance for the development of future smart metal matrix composites or smart structures with embedded shape memory alloy components
Efficient photoionization for barium ion trapping using a dipole-allowed resonant two-photon transition
Two efficient and isotope-selective resonant two-photon ionization techniques
for loading barium ions into radio-frequency (RF)-traps are demonstrated. The
scheme of using a strong dipole-allowed transition at \lambda=553 nm as a first
step towards ionization is compared to the established technique of using a
weak intercombination line (\lambda=413 nm). An increase of two orders of
magnitude in the ionization efficiency is found favoring the transition at 553
nm. This technique can be implemented using commercial all-solid-state laser
systems and is expected to be advantageous compared to other narrowband
photoionization schemes of barium in cases where highest efficiency and
isotope-selectivity are required.Comment: 8 pages, 5 figure
Ab initio many-body calculations on infinite carbon and boron-nitrogen chains
In this paper we report first-principles calculations on the ground-state
electronic structure of two infinite one-dimensional systems: (a) a chain of
carbon atoms and (b) a chain of alternating boron and nitrogen atoms. Meanfield
results were obtained using the restricted Hartree-Fock approach, while the
many-body effects were taken into account by second-order M{\o}ller-Plesset
perturbation theory and the coupled-cluster approach. The calculations were
performed using 6-31 basis sets, including the d-type polarization
functions. Both at the Hartree-Fock (HF) and the correlated levels we find that
the infinite carbon chain exhibits bond alternation with alternating single and
triple bonds, while the boron-nitrogen chain exhibits equidistant bonds. In
addition, we also performed density-functional-theory-based local density
approximation (LDA) calculations on the infinite carbon chain using the same
basis set. Our LDA results, in contradiction to our HF and correlated results,
predict a very small bond alternation. Based upon our LDA results for the
carbon chain, which are in agreement with an earlier LDA calculation
calculation [ E.J. Bylaska, J.H. Weare, and R. Kawai, Phys. Rev. B 58, R7488
(1998).], we conclude that the LDA significantly underestimates Peierls
distortion. This emphasizes that the inclusion of many-particle effects is very
important for the correct description of Peierls distortion in one-dimensional
systems.Comment: 3 figures (included). To appear in Phys. Rev.
Mapping the Two-Component Atomic Fermi Gas to the Nuclear Shell-Model
The physics of a two-component cold fermi gas is now frequently addressed in
laboratories. Usually this is done for large samples of tens to hundreds of
thousands of particles. However, it is now possible to produce few-body systems
(1-100 particles) in very tight traps where the shell structure of the external
potential becomes important. A system of two-species fermionic cold atoms with
an attractive zero-range interaction is analogous to a simple model of nucleus
in which neutrons and protons interact only through a residual pairing
interaction. In this article, we discuss how the problem of a two-component
atomic fermi gas in a tight external trap can be mapped to the nuclear shell
model so that readily available many-body techniques in nuclear physics, such
as the Shell Model Monte Carlo (SMMC) method, can be directly applied to the
study of these systems. We demonstrate an application of the SMMC method by
estimating the pairing correlations in a small two-component Fermi system with
moderate-to-strong short-range two-body interactions in a three-dimensional
harmonic external trapping potential.Comment: 13 pages, 3 figures. Final versio
Active Amplification of the Terrestrial Albedo to Mitigate Climate Change: An Exploratory Study
This study explores the potential to enhance the reflectance of solar
insolation by the human settlement and grassland components of the Earth's
terrestrial surface as a climate change mitigation measure. Preliminary
estimates derived using a static radiative transfer model indicate that such
efforts could amplify the planetary albedo enough to offset the current global
annual average level of radiative forcing caused by anthropogenic greenhouse
gases by as much as 30 percent or 0.76 W/m2. Terrestrial albedo amplification
may thus extend, by about 25 years, the time available to advance the
development and use of low-emission energy conversion technologies which
ultimately remain essential to mitigate long-term climate change. However,
additional study is needed to confirm the estimates reported here and to assess
the economic and environmental impacts of active land-surface albedo
amplification as a climate change mitigation measure.Comment: 21 pages, 3 figures. In press with Mitigation and Adaptation
Strategies for Global Change, Springer, N
Charged pion form factor between Q^2=0.60 and 2.45 GeV^2. II. Determination of, and results for, the pion form factor
The charged pion form factor, Fpi(Q^2), is an important quantity which can be
used to advance our knowledge of hadronic structure. However, the extraction of
Fpi from data requires a model of the 1H(e,e'pi+)n reaction, and thus is
inherently model dependent. Therefore, a detailed description of the extraction
of the charged pion form factor from electroproduction data obtained recently
at Jefferson Lab is presented, with particular focus given to the dominant
uncertainties in this procedure. Results for Fpi are presented for
Q^2=0.60-2.45 GeV^2. Above Q^2=1.5 GeV^2, the Fpi values are systematically
below the monopole parameterization that describes the low Q^2 data used to
determine the pion charge radius. The pion form factor can be calculated in a
wide variety of theoretical approaches, and the experimental results are
compared to a number of calculations. This comparison is helpful in
understanding the role of soft versus hard contributions to hadronic structure
in the intermediate Q^2 regime.Comment: 18 pages, 11 figure
- …