Technology utilization review and analysis, Volume I Final report, 28 Feb. - 31 Aug. 1964

Technology utilization review and analysis of Ranger Block III program - protein detection, biochemical battery, and solar cell technolog

Oscillator strength of the resonance transitions of ground-state N and O

Oscillator strength of resonance transitions of ground state nitrogen and oxyge

Turbine Vane External Heat Transfer. Volume 1: Analytical and Experimental Evaluation of Surface Heat Transfer Distributions with Leading Edge Showerhead Film Cooling

Progress in predictive design capabilities for external heat transfer to turbine vanes was summarized. A two dimensional linear cascade (previously used to obtain vane surface heat transfer distributions on nonfilm cooled airfoils) was used to examine the effect of leading edge shower head film cooling on downstream heat transfer. The data were used to develop and evaluate analytical models. Modifications to the two dimensional boundary layer model are described. The results were used to formulate and test an effective viscosity model capable of predicting heat transfer phenomena downstream of the leading edge film cooling array on both the suction and pressure surfaces, with and without mass injection

The effects of leading edge and downstream film cooling on turbine vane heat transfer

The progress under contract NAS3-24619 toward the goal of establishing a relevant data base for use in improving the predictive design capabilities for external heat transfer to turbine vanes, including the effect of downstream film cooling with and without leading edge showerhead film cooling. Experimental measurements were made in a two-dimensional cascade previously used to obtain vane surface heat transfer distributions on nonfilm cooled airfoils under contract NAS3-22761 and leading edge showerhead film cooled airfoils under contract NAS3-23695. The principal independent parameters (Mach number, Reynolds number, turbulence, wall-to-gas temperature ratio, coolant-to-gas temperature ratio, and coolant-to-gas pressure ratio) were maintained over ranges consistent with actual engine conditions and the test matrix was structured to provide an assessment of the independent influence of parameters of interest, namely, exit Mach number, exit Reynolds number, coolant-to-gas temperature ratio, and coolant-to-gas pressure ratio. Data provide a data base for downstream film cooled turbine vanes and extends the data bases generated in the two previous studies. The vane external heat transfer obtained indicate that considerable cooling benefits can be achieved by utilizing downstream film cooling. The data obtained and presented illustrate the interaction of the variables and should provide the airfoil designer and computational analyst the information required to improve heat transfer design capabilities for film cooled turbine airfoils

Turbine airfoil film cooling

The experimental data obtained in this program gives insight into the physical phenomena that occur on a film cooled airfoil, and should provide a relevant data base for verification of new design tools. Results indicate that the downstream film cooling process is a complex function of the thermal dilution and turbulence augmentation parameters with trends actually reversing as blowing strength and coolant-to-gas temperature ratio varied. The pressure surface of the airfoil is shown to exhibit a considerably higher degree of sensitivity to changes in the film cooling parameters and, consequently, should prove to be more of a challenge than the suction surface in accurately predicting heat transfer levels with downsteam film cooling

Testing Linear-Invariant Non-Linear Properties

We consider the task of testing properties of Boolean functions that are invariant under linear transformations of the Boolean cube. Previous work in property testing, including the linearity test and the test for Reed-Muller codes, has mostly focused on such tasks for linear properties. The one exception is a test due to Green for "triangle freeness": a function f:\cube^{n}\to\cube satisfies this property if $f(x),f(y),f(x+y)$ do not all equal 1, for any pair x,y\in\cube^{n}. Here we extend this test to a more systematic study of testing for linear-invariant non-linear properties. We consider properties that are described by a single forbidden pattern (and its linear transformations), i.e., a property is given by $k$ points v_{1},...,v_{k}\in\cube^{k} and f:\cube^{n}\to\cube satisfies the property that if for all linear maps L:\cube^{k}\to\cube^{n} it is the case that $f(L(v_{1})),...,f(L(v_{k}))$ do not all equal 1. We show that this property is testable if the underlying matroid specified by $v_{1},...,v_{k}$ is a graphic matroid. This extends Green's result to an infinite class of new properties. Our techniques extend those of Green and in particular we establish a link between the notion of "1-complexity linear systems" of Green and Tao, and graphic matroids, to derive the results.Comment: This is the full version; conference version appeared in the proceedings of STACS 200

Cluster Winds Blow along Supercluster Axes

Within Abell galaxy clusters containing wide-angle tailed radio sources, there is evidence of a ``prevailing wind'' which directs the WAT jets. We study the alignment of WAT jets and nearby clusters to test the idea that this wind may be a fossil of drainage along large-scale supercluster axes. We also test this idea with a study of the alignment of WAT jets and supercluster axes. Statistical test neighbours indicate no alignment of WAT jets towards nearest clusters, but do indicate approximately 98% confidence in alignment with the long axis of the supercluster in which the cluster lies. We find a preferred scale for such superclusters of order 25 Mpc $h^{-1}$.Comment: Latex, 5 pages, with 5 postscript figures. To be published in MNRAS. Slight revisions to coincide with journal text. Linked to color image at http://kusmos.phsx.ukans.edu/~melott/images/A2634SUW.jp

New York City High-Rises on Rock: Uncovering the Unknown Leads to Variable Foundation Solutions

Construction of high-rise towers in New York City continues to provide exciting challenges for design and construction teams. Sites are becoming increasingly more difficult to build on as “desirable” locations have long since been developed and developers are constructing on sites that were previously over looked. This paper describes two projects that provided unique challenges to the engineers and contractors. The first site is the New York Times Headquarters Tower. This site appeared to be a fairly straightforward foundation design, but became complicated as the subsurface conditions were uncovered. The second case history is the new Bank of America Tower which presented significant design challenges from the outset as it entailed a three basement excavation adjacent to subways and a historic theater façade that required protection. In both cases, close collaboration between the owner, design engineers, construction manager and eventual foundation contractors was required to complete the projects in a timely manner and without adversely affecting adjacent subways, pedestrian traffic, or adjacent historical structures

Risk Factors for Long-Term Coronary Artery Calcium Progression in the Multi-Ethnic Study of Atherosclerosis.

BackgroundCoronary artery calcium (CAC) detected by noncontrast cardiac computed tomography scanning is a measure of coronary atherosclerosis burden. Increasing CAC levels have been strongly associated with increased coronary events. Prior studies of cardiovascular disease risk factors and CAC progression have been limited by short follow-up or restricted to patients with advanced disease.Methods and resultsWe examined cardiovascular disease risk factors and CAC progression in a prospective multiethnic cohort study. CAC was measured 1 to 4 times (mean 2.5 scans) over 10 years in 6810 adults without preexisting cardiovascular disease. Mean CAC progression was 23.9 Agatston units/year. An innovative application of mixed-effects models investigated associations between cardiovascular disease risk factors and CAC progression. This approach adjusted for time-varying factors, was flexible with respect to follow-up time and number of observations per participant, and allowed simultaneous control of factors associated with both baseline CAC and CAC progression. Models included age, sex, study site, scanner type, and race/ethnicity. Associations were observed between CAC progression and age (14.2 Agatston units/year per 10 years [95% CI 13.0 to 15.5]), male sex (17.8 Agatston units/year [95% CI 15.3 to 20.3]), hypertension (13.8 Agatston units/year [95% CI 11.2 to 16.5]), diabetes (31.3 Agatston units/year [95% CI 27.4 to 35.3]), and other factors.ConclusionsCAC progression analyzed over 10 years of follow-up, with a novel analytical approach, demonstrated strong relationships with risk factors for incident cardiovascular events. Longitudinal CAC progression analyzed in this framework can be used to evaluate novel cardiovascular risk factors