Quantized adiabatic quantum pumping due to interference

Recent theoretical calculations, demonstrating that quantized charge transfer due to adiabatically modulated potentials in mesoscopic devices can result purely from the interference of the electron wave functions (without invoking electron-electron interactions) are reviewed: (1) A new formula is derived for the pumped charge Q (per period); It reproduces the Brouwer formula without a bias, and also yields the effect of the modulating potential on the Landauer formula in the presence of a bias. (2) For a turnstile geometry, with time-dependent gate voltages V_L(t) and V_R(t), the magnitude and sign of Q are determined by the relative position and orientation of the closed contour traversed by the system in the {V_L-V_R} plane, relative to the transmission resonances in that plane. Integer values of Q (in units of e) are achieved when a transmission peak falls inside the contour, and are given by the winding number of the contour. (3) When the modulating potential is due to surface acoustic waves, Q exhibits a staircase structure, with integer values, reminiscent of experimental observations.Comment: Invited talk, Localization, Tokyo, August 200

Excessive noise as a test for many-body localization

Recent experimental reports suggested the existence of a finite-temperature insulator in the vicinity of the superconductor-insulator transition. The rapid decay of conductivity over a narrow temperature range was theoretically linked to both a finite-temperature transition to a many-body-localized state, and to a charge-Berezinskii-Kosterlitz-Thouless transition. Here we report of low-frequency noise measurements of such insulators to test for many-body localization. We observed a huge enhancement of the low-temperatures noise when exceeding a threshold voltage for nonlinear conductivity and discuss our results in light of the theoretical models

Thermal performance and energy savings of white and sedum-tray garden roof: A case study in a Chongqing office building

This study presents the experimental measurement of the energy consumption of three top-floor air-conditioned rooms in a typical office building in Chongqing, which is a mountainous city in the hot-summer and cold-winter zone of China, to examine the energy performance of white and sedum-tray garden roofs. The energy consumption of the three rooms was measured from September 2014 to September 2015 by monitoring the energy performance (temperature distributions of the roofs, evaporation, heat fluxes, and energy consumption) and indoor air temperature. The rooms had the same construction and appliances, except that one roof top was black, one was white, and one had a sedum-tray garden roof. This study references the International Performance Measurement and Verification Protocol (IPMVP) to calculate and compare the energy savings of the three kinds of roofs. The results indicate that the energy savings ratios of the rooms with the sedum-tray garden roof and with the white roof were 25.0% and 20.5%, respectively, as compared with the black-roofed room, in the summer; by contrast, the energy savings ratios were −9.9% and −2.7%, respectively, in the winter. Furthermore, Annual conditioning energy savings of white roof (3.9 kWh/m2) were 1.6 times the energy savings for the sedum-tray garden roof. It is evident that white roof is a preferable choice for office buildings in Chongqing. Additionally, The white roof had a reflectance of 0.58 after natural aging owing to the serious air pollution worsened its thermal performance, and the energy savings reduced by 0.033 kWh/m2·d. Evaporation was also identified to have a significant effect on the energy savings of the sedum-tray garden roof

The Impact of Implicit Racial Bias on the Exercise of Prosecutorial Discretion

The Article is organized as follows: Part II provides an introduction to implicit bias research, orienting readers to the important aspects of implicit bias most relevant to prosecutorial discretion. Part III begins the examination of implicit bias in the daily decisions of prosecutors. The Part presents key prosecutorial discretion points and specifically connects each of them to implicit bias. Part IV recognizes that, despite compelling proof of implicit bias in a range of domains, there is no direct empirical proof of implicit bias in prosecutorial decision-making. It thus calls for an implicit bias research agenda designed to further examine how and when implicit bias affects prosecutorial decision-making, including studies designed to test ways of reducing the harms of these biases. It then begins a necessarily early look at potential remedies for the harms associated with implicit bias in prosecutorial discretion

The Impact of Implicit Racial Bias on the Exercise of Prosecutorial Discretion

The Article is organized as follows: Part II provides an introduction to implicit bias research, orienting readers to the important aspects of implicit bias most relevant to prosecutorial discretion. Part III begins the examination of implicit bias in the daily decisions of prosecutors. The Part presents key prosecutorial discretion points and specifically connects each of them to implicit bias. Part IV recognizes that, despite compelling proof of implicit bias in a range of domains, there is no direct empirical proof of implicit bias in prosecutorial decision-making. It thus calls for an implicit bias research agenda designed to further examine how and when implicit bias affects prosecutorial decision-making, including studies designed to test ways of reducing the harms of these biases. It then begins a necessarily early look at potential remedies for the harms associated with implicit bias in prosecutorial discretion

Carbide coated fibers in graphite-aluminum composites

The NASA-supported program at the Los Alamos Scientific Laboratory (LASL) to develop carbon fiber-aluminum matrix composites is described. Chemical vapor deposition (CVD) was used to uniformly deposit thin, smooth, continuous coats of TiC on the fibers of graphite tows. Wet chemical coating of fibers, followed by high-temperature treatment, was also used, but showed little promise as an alternative coating method. Strength measurements on CVD coated fiber tows showed that thin carbide coats can add to fiber strength. The ability of aluminum alloys to wet TiC was successfully demonstrated using TiC-coated graphite surfaces. Pressure-infiltration of TiC- and ZrC-coated fiber tows with aluminum alloys was only partially successful. Experiments were performed to evaluate the effectiveness of carbide coats on carbon as barriers to prevent reaction between alluminum alloys and carbon. Initial results indicate that composites of aluminum and carbide-coated graphite are stable for long periods of time at temperatures near the alloy solidus

Carbide coated fibers in graphites-aluminum composites

Research activities are described for a NASA-supported program at the Los Alamos Scientific Laboratory to develop graphite fiber-aluminum matrix composites. A chemical vapor deposition apparatus was constructed for continuously coating graphite fibers with TiC. As much as 150 meters of continuously coated fibers were produced. Deposition temperatures were varied from 1365 K to about 1750 K, and deposition time from 6 to 150 seconds. The 6 sec deposition time corresponded to a fiber feed rate of 2.54 m/min through the coater. Thin, uniform, adherent TiC coats, with thicknesses up to approximately 0.1 micrometer were produced on the individual fibers of Thornel 50 graphite yarns without affecting fiber strength. Although coat properties were fairly uniform throughout a given batch, more work is needed to improve the batch-to-batch reproducibility. Samples of TiC-coated Thornel 50 fibers were infiltrated with an aluminum alloy and hot-pressed in vacuum to produce small composite bars for flexure testing. Strengths as high as 90% of the rule-of-mixtures strength were achieved. Results of the examination of the fracture surfaces indicate that the bonding between the aluminum and the TiC-coated fibers is better than that achieved in a similar, commercially infiltrated material made with fibers having no observable surface coats. Several samples of Al-infiltrated, TiC-coated Thornel 50 graphite yarns, together with samples of the commercially infiltrated, uncoated fibers, were heated for 100 hours at temperatures near the alloy solidus. The TiC-coated samples appear to undergo less reaction than do the uncoated samples. Photomicrographs are shown

Carbide coated fibers in graphite-aluminum composites

The study of protective-coupling layers of refractory metal carbides on the graphite fibers prior to their incorporation into composites is presented. Such layers should be directly wettable by liquid aluminum and should act as diffusion barriers to prevent the formation of aluminum carbide. Chemical vapor deposition was used to uniformly deposit thin, smooth, continuous coats of ZrC on the carbon fibers of tows derived from both rayon and polyacrylonitrile. A wet chemical coating of the fibers, followed by high-temperature treatment, was used, and showed promise as an alternative coating method. Experiments were performed to demonstrate the ability of aluminum alloys to wet carbide surfaces. Titanium carbide, zirconium carbide and carbide-coated graphite surfaces were successfully wetted. Results indicate that initial attempts to wet surfaces of ZrC-coated carbon fibers appear successful

Zero-energy states in graphene quantum dots and rings

We present exact analytical zero-energy solutions for a class of smooth decaying potentials, showing that the full confinement of charge carriers in electrostatic potentials in graphene quantum dots and rings is indeed possible without recourse to magnetic fields. These exact solutions allow us to draw conclusions on the general requirements for the potential to support fully confined states, including a critical value of the potential strength and spatial extent.Comment: 8 pages, 3 figures, references added, typos corrected, discussion section expande

Probing Micro-quasars with TeV Neutrinos

The jets associated with Galactic micro-quasars are believed to be ejected by accreting stellar mass black-holes or neutron stars. We show that if the energy content of the jets in the transient sources is dominated by electron-proton plasma, then a several hour outburst of 1--100 TeV neutrinos produced by photo- meson interactions should precede the radio flares associated with major ejection events. Several neutrinos may be detected during a single outburst by a 1km^2 detector, thereby providing a powerful probe of micro-quasars jet physics.Comment: Accepted to PRL. More detailed discussion of particle acceleratio