3,223 research outputs found
Leptinotarsa decemlineata (Coleoptera: Chrysomelidae) Observed Feeding on Chamaesaracha sp. in Eastern Colorado.
Egg, larval, and adult life stages of Colorado potato beetle, Leptinotarsa decemlineata (Say), were observed feeding on or attached to a previously undocumented host plant belonging to the genus Chamaesaracha in eastern Colorado on July 2017. At one site, L. decemlineata were more abundant on Chamaesaracha sp. than the accepted ancestral host plant, Solanum rostratum (Dunal). While future studies should confirm the ancestral status of the observed L. decemlineata and suitability of Chamaesaracha sp. for completion of development, our observations suggest a need for further characterization of the ancestral host range of L. decemlineata
Modeling and Optimization for Morphing Wing Concept Generation II
This report documents a series of investigations to develop an approach for structural sizing of various morphing wing concepts. For the purposes of this report, a morphing wing is one whose planform can make significant shape changes in flight - increasing wing area by 50% or more from the lowest possible area, changing sweep 30 or more, and / or increasing aspect ratio by as much as 200% from the lowest possible value. These significant changes in geometry mean that the underlying load-bearing structure changes geometry. While most finite element analysis packages provide some sort of structural optimization capability, these codes are not amenable to making significant changes in the stiffness matrix to reflect the large morphing wing planform changes. The investigations presented here use a finite element code capable of aeroelastic analysis in three different optimization approaches -a "simultaneous analysis" approach, a "sequential" approach, and an "aggregate" approach
Contact-induced apical asymmetry drives the thigmotropic responses of Candida albicans hyphae
Acknowledgements We thank Marco Thiel for assistance with data interpretation, Peter Sudbery for the provision of strains and Jeremy Craven for useful discussions. This work was supported by a BBSRC-DTG to D. D. T., NIH award DK083592 to F. J. B. and P. A. J., and a Royal Society URF UF080611 and MRC NIRG 90671 to A. C. B.Non peer reviewedPublisher PD
Morphing Wing Weight Predictors and Their Application in a Template-Based Morphing Aircraft Sizing Environment II
This report presents an approach for sizing of a morphing aircraft based upon a multi-level design optimization approach. For this effort, a morphing wing is one whose planform can make significant shape changes in flight - increasing wing area by 50% or more from the lowest possible area, changing sweep 30 or more, and/or increasing aspect ratio by as much as 200% from the lowest possible value. The top-level optimization problem seeks to minimize the gross weight of the aircraft by determining a set of "baseline" variables - these are common aircraft sizing variables, along with a set of "morphing limit" variables - these describe the maximum shape change for a particular morphing strategy. The sub-level optimization problems represent each segment in the morphing aircraft's design mission; here, each sub-level optimizer minimizes fuel consumed during each mission segment by changing the wing planform within the bounds set by the baseline and morphing limit variables from the top-level problem
Modeling and Optimization for Morphing Wing Concept Generation
This report consists of two major parts: 1) the approach to develop morphing wing weight equations, and 2) the approach to size morphing aircraft. Combined, these techniques allow the morphing aircraft to be sized with estimates of the morphing wing weight that are more credible than estimates currently available; aircraft sizing results prior to this study incorporated morphing wing weight estimates based on general heuristics for fixed-wing flaps (a comparable "morphing" component) but, in general, these results were unsubstantiated. This report will show that the method of morphing wing weight prediction does, in fact, drive the aircraft sizing code to different results and that accurate morphing wing weight estimates are essential to credible aircraft sizing results
Who the hell was that? Stories, bodies and actions in the world
This article explores a two-way relationship between stories and the experiential actions of bodies in the world. Through an autoethnographic approach, the article presents a series of interlinked story fragments in an effort to show and evoke a feel for the ways in which stories, bodies, and actions influence and shape each other over time. It offers some reflections on the experiences the stories portray from the perspective of a social constructionist conception of narrative theory and suggest that while stories exert a powerful influence on the actions of our bodies, our bodies intrude on or âtalk backâ to this process because bodies have an existence beyond stories
The Effect of Crystallization on the Pulsations of White Dwarf Stars
We consider the pulsational properties of white dwarf star models with
temperatures appropriate for the ZZ Ceti instability strip and with masses
large enough that they should be substantially crystallized. Our work is
motivated by the existence of a potentially crystallized DAV, BPM 37093, and
the expectation that digital surveys in progress will yield many more such
massive pulsators.
A crystallized core makes possible a new class of oscillations, the torsional
modes, although we expect these modes to couple at most weakly to any motions
in the fluid and therefore to remain unobservable. The p-modes should be
affected at the level of a few percent in period, but are unlikely to be
present with observable amplitudes in crystallizing white dwarfs any more than
they are in the other ZZ Ceti's. Most relevant to the observed light variations
in white dwarfs are the g-modes. We find that the kinetic energy of these modes
is effectively excluded from the crystallized cores of our models. As
increasing crystallization pushes these modes farther out from the center, the
mean period spacing between radial overtones increases substantially with the
crystallized mass fraction. In addition, the degree and structure of mode
trapping is affected. The fact that some periods are strongly affected by
changes in the crystallized mass fraction while others are not suggests that we
may be able to disentangle the effects of crystallization from those due to
different surface layer masses.Comment: 18 pages, 5 figures, accepted on 1999 July 2 for publication in the
Astrophysical Journa
The potential of ground gravity measurements to validate GRACE data
New satellite missions are returning high precision, time-varying, satellite measurements of the Earthâs gravity field. The GRACE mission is now in its calibration/- validation phase and first results of the gravity field solutions are imminent. We consider here the possibility of external validation using data from the superconducting gravimeters in the European sub-array of the Global Geodynamics Project (GGP) as âground truthâ for comparison with GRACE. This is a pilot study in which we use 14 months of 1-hour data from the beginning of GGP (1 July 1997) to 30 August 1998, when the Potsdam instrument was relocated to South Africa. There are 7 stations clustered in west central Europe, and one station, Metsahovi in Finland. We remove local tides, polar motion, local and global air pressure, and instrument drift and then decimate to 6-hour samples. We see large variations in the time series of 5â10<i>”</i>gal between even some neighboring stations, but there are also common features that correlate well over the 427-day period. The 8 stations are used to interpolate a minimum curvature (gridded) surface that extends over the geographical region. This surface shows time and spatial coherency at the level of 2â 4<i>”</i>gal over the first half of the data and 1â2<i>”</i>gal over the latter half. The mean value of the surface clearly shows a rise in European gravity of about 3”gal over the first 150 days and a fairly constant value for the rest of the data. The accuracy of this mean is estimated at 1<i>”</i>gal, which compares favorably with GRACE predictions for wavelengths of 500 km or less. Preliminary studies of hydrology loading over Western Europe shows the difficulty of correlating the local hydrology, which can be highly variable, with large-scale gravity variations.<br><br><b>Key words. </b>GRACE, satellite gravity, superconducting gravimeter, GGP, ground trut
Recommended from our members
Benchmarking 2D hydraulic models for urban flood simulations
This paper describes benchmark testing of six two-dimensional (2D) hydraulic models (DIVAST, DIVASTTVD, TUFLOW, JFLOW, TRENT and LISFLOOD-FP) in terms of their ability to simulate surface flows in a densely urbanised area. The models are applied to a 1·0 km à 0·4 km urban catchment within the city of Glasgow, Scotland, UK, and are used to simulate a flood event that occurred at this site on 30 July 2002. An identical numerical grid describing the underlying topography is constructed for each model, using a combination of airborne laser altimetry (LiDAR) fused with digital map data, and used to run a benchmark simulation. Two numerical experiments were then conducted to test the response of each model to topographic error and uncertainty over friction parameterisation. While all the models tested produce plausible results, subtle differences between particular groups of codes give considerable insight into both the practice and science of urban hydraulic modelling. In particular, the results show that the terrain data available from modern LiDAR systems are sufficiently accurate and resolved for simulating urban flows, but such data need to be fused with digital map data of building topology and land use to gain maximum benefit from the information contained therein. When such terrain data are available, uncertainty in friction parameters becomes a more dominant factor than topographic error for typical problems. The simulations also show that flows in urban environments are characterised by numerous transitions to supercritical flow and numerical shocks. However, the effects of these are localised and they do not appear to affect overall wave propagation. In contrast, inertia terms are shown to be important in this particular case, but the specific characteristics of the test site may mean that this does not hold more generally
Sharing a different voice: Attending to stories in collaborative writing
Through three stories, we hope to reveal how sometimes contradictory or unrecognizable aspects of our lives, selves, and stories can create tensions in the collaborative writing endeavor. We begin with a story that illuminates some of the narrative tensions that surface during a decade of writing collaboratively. In an effort to navigate these tensions, we explore two further stories in dialogue as a way to reveal how dominant narratives shape our lives and the stories we might tell. One aim of sharing these stories is to reveal how problematic ways of being are often inseparable from oneâs cultural legacy. Making previously obscured narratives visible paves the way for imaginary leaps that are necessary for change. We hope these insights are useful for other writers and collaborators and those who seek caring, responsive, and nurturing writing relationships yet realize this journey can be problematic
- âŠ