Water Chemisorption and Reconstruction of the MgO Surface

The observed reactivity of MgO with water is in apparent conflict with theoretical calculations which show that molecular dissociation does not occur on a perfect (001) surface. We have performed ab-initio total energy calculations which show that a chemisorption reaction involving a reconstruction to form a (111) hydroxyl surface is strongly preferred with Delta E = -90.2kJ/mol. We conclude that protonation stabilizes the otherwise unstable (111) surface and that this, not the bare (001), is the most stable surface of MgO under ambient conditions.Comment: RevTeX, 4 pages, 1 Encapsulated Postscript Figur

High‐Frequency Dissolved Organic Carbon and Nitrate Measurements Reveal Differences in Storm Hysteresis and Loading in Relation to Land Cover and Seasonality

Storm events dominate riverine loads of dissolved organic carbon (DOC) and nitrate and are expected to increase in frequency and intensity in many regions due to climate change. We deployed three high‐frequency (15 min) in situ absorbance spectrophotometers to monitor DOC and nitrate concentration for 126 storms in three watersheds with agricultural, urban, and forested land use/land cover. We examined intrastorm hysteresis and the influences of seasonality, storm size, and dominant land use/land cover on storm DOC and nitrate loads. DOC hysteresis was generally anticlockwise at all sites, indicating distal and plentiful sources for all three streams despite varied DOC character and sources. Nitrate hysteresis was generally clockwise for urban and forested sites, but anticlockwise for the agricultural site, indicating an exhaustible, proximal source of nitrate in the urban and forested sites, and more distal and plentiful sources of nitrate in the agricultural site. The agricultural site had significantly higher storm nitrate yield per water yield and higher storm DOC yield per water yield than the urban or forested sites. Seasonal effects were important for storm nitrate yield in all three watersheds and farm management practices likely caused complex interactions with seasonality at the agricultural site. Hysteresis indices did not improve predictions of storm nitrate yields at any site. We discuss key lessons from using high‐frequency in situ optical sensors

Review of Dental Impression Materials

Major advances in impression materials and their application have occurred during the last decade, with greater emphasis being placed on rubber impression materials than on dental compound, zinc oxide-eugenol, and agar and alginate. Of particular interest has been the effect of disinfection solutions on the qualities of impressions and the biocompatibility of impression materials. The principal advance in hydrocolloids has been the introduction of the agar/alginate impression technique, which has simplified the procedure and improved the quality of gypsum dies compared with those prepared in alginate impressions. The tear strength of some alginates has been improved, and some have been formulated so that the powder is dustless, thus reducing the health hazard as a result of patient inhalation of dust during the dispensing process. Polyether and silicone impression materials have been modified so that the working time, viscosity, and flexibility of the polyethers have been improved and, with the introduction of addition silicones, their accuracy has become exceptional. Although the early addition silicones liberated hydrogen after setting, thus delaying the pouring of models and dies, most addition silicones have been improved so that no hydrogen is released and dies can be poured immediately. The introduction of automatic mixing systems for addition silicones has simplified their manipulation, has reduced the number of voids in impressions, and has reduced the amount of material wasted. The incorporation of surfactants into addition silicones has made them hydrophilic, with wetting properties similar to those of polyethers, and has made pouring bubble-free gypsum dies easier. This review is confined to published and unpublished information of the past decade. It will also suggest trends that should be anticipated in the near future based on this information. The review will not present information developed before 1975, which is available in several textbooks on dental materials by Craig (1985a), Phillips (1982), and Williams and Cunningham (1979).Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66604/2/10.1177_08959374880020012001.pd

Photoinduced transformation of waste-derived soluble bio-based substances

[EN] Waste-derived, soluble bin-based substances (SBO), are effective low-cost photosensitizers that could find application in pollutant photodegradation. For this reason, it is important to understand if and to what extent irradiation could modify their properties. The exposure of SBO to simulated sunlight induced important spectral and structural modifications. Both the whole material and its acid-soluble fraction were characterized, highlighting several properties in common with humic and fulvic substances, including absorption spectra, specific absorbance and fluorescence behavior. The latter was described with a three-component model using PARAFAC analysis. Irradiation induced SBO photobleaching, but the absorbance of the acid-soluble fraction increased with irradiation. This finding suggests a progressive photochemical solubilization of SBO, which is confirmed by the increase of the carboxylic groups. In addition to absorbance, the fluorescence of whole SBO was also decreased by irradiation, thereby suggesting that both chromophores and fluorophores were photodegraded. The increasingly hydrophilic character given to SBO by irradiation also accounted for the photoinduced decrease of the surfactant properties of the material. (C) 2015 Elsevier B.V. All rights reserved.This work was funded by the 7thFP IRSES-2010-269128-EnvironBos Marie Curie Action and by Ministero delle Politiche Agricole e Forestali (Agrienergia project). The authors are grateful to the following private and/or public Italian institutions: (a) Acea Pinerolese Spa in Pinerolo (TO) for supplying the SBO sourcing materials; (b) Studio Chiono ed Associati in Rivarolo Canavese (TO) for making available pilot equipment and services for the production of the SBO.Avetta, P.; Berto, S.; Bianco Prevot, A.; Minella, M.; Montoneri, E.; Persico, D.; Vione, D.... (2015). Photoinduced transformation of waste-derived soluble bio-based substances. Chemical Engineering Journal. 274:247-255. https://doi.org/10.1016/j.cej.2015.03.126S24725527

Genes Are Often Sheltered from the Global Histone Hyperacetylation Induced by HDAC Inhibitors

Histone deacetylase inhibitors (HDACi) are increasingly used as therapeutic agents, but the mechanisms by which they alter cell behaviour remain unclear. Here we use microarray expression analysis to show that only a small proportion of genes (∼9%) have altered transcript levels after treating HL60 cells with different HDACi (valproic acid, Trichostatin A, suberoylanilide hydroxamic acid). Different gene populations respond to each inhibitor, with as many genes down- as up-regulated. Surprisingly, HDACi rarely induced increased histone acetylation at gene promoters, with most genes examined showing minimal change, irrespective of whether genes were up- or down-regulated. Many genes seem to be sheltered from the global histone hyperacetyation induced by HDACi

Pathways of Superoxide (O2-) decay in the Eastern Tropical North Atlantic

Superoxide (O2-: IUPAC name dioxide (•1−)) is an important transient reactive oxygen species (ROS) in the ocean formed as an intermediate in the redox transformation of oxygen (O2) into hydrogen peroxide (H2O2) and vice versa. This highly reactive and very short-lived radical anion can be produced both via photochemical and biological processes in the ocean. In this paper we examine the decomposition rate of O2- throughout the water column, using new data collected in the Eastern Tropical North Atlantic (ETNA) Ocean. For this approach we applied a semi factorial experimental design, to identify and quantify the pathways of the major identified sinks in the ocean. In this work we occupied 6 stations, 2 on the West African continental shelf and 4 open ocean stations, including the CVOO time series site adjacent to Cape Verde. Our results indicate that in the surface ocean, impacted by Saharan aerosols and sediment resuspension, the main decay pathways for superoxide is via reactions with Mn(II) and organic matter

Physicochemical Characterization of Passive Films and Corrosion Layers by Differential Admittance and Photocurrent Spectroscopy

Two different electrochemical techniques, differential admittance and photocurrent spectroscopy, for the characterization of electronic and solid state properties of passive films and corrosion layers are described and critically evaluated. In order to get information on the electronic properties of passive film and corrosion layers as well as the necessary information to locate the characteristic energy levels of the passive film/electrolyte junction like: flat band potential (Ufb), conduction band edge (EC) or valence band edge (EV), a wide use of Mott-Schottky plots is usually reported in corrosion science and passivity studies. It has been shown, in several papers, that the use of simple M-S theory to get information on the electronic properties and energy levels location at the film/electrolyte interface can be seriously misleading and/or conflicting with the physical basis underlying the M-S theory. A critical appraisal of this approach to the study of very thin and thick anodic passive film grown on base-metals (Cr, Ni, Fe, SS etc..) or on valve metals (Ta, Nb, W etc..) is reported in this work, together with possible alternative approach to overcome some of the mentioned inconsistencies. At this aim the theory of amorphous semiconductor Schottky barrier, introduced several years ago in the study of passive film/electrolyte junction, is reviewed by taking into account some of the more recent results obtained by the present authors. Future developments of the theory appears necessary to get more exact quantitative information on the electronic properties of passive films, specially in the case of very thin film like those formed on base metals and their alloys. The second technique described in this chapter, devoted to the physico-chemical characterization of passive film and corrosion layers, is a more recent technique based on the analysis of the photo-electrochemical answer of passive film/electrolyte junction under illumination with photons having suitable energy. Such a technique usually referred to as Photocurrent Spectroscopy (PCS) has been developed on the basis of the large research effort carried out by several groups in the 1970’s and aimed to investigate the possible conversion of solar energy by means of electrochemical cells. In this work the fundamentals of semiconductor/electrolyte junctions under illumination will be highlighted both for crystalline and amorphous materials. The role of amorphous nature and film thickness on the photo-electrochemical answer of passive film/solution interface is reviewed as well the use of PCS for quantitative analysis of the film composition based on a semi-empirical correlation between optical band gap and difference of electronegativity of film constituents previously suggested by the present authors. In this frame the results of PCS studies on valve metal oxides and valve metal mixed oxides will be discussed in order to show the validity of the proposed method. The results of PCS studies aimed to get information on passive film composition and carried out by different authors on base metals (Fe, Cr, Ni) and their alloys, including stainless steel, will be also compared with compositional analysis carried out by well-established surface analysis techniques

Estimates of new and total productivity in central Long Island Sound from in situ measurements of nitrate and dissolved oxygen

Author Posting. © The Author(s), 2013. This is the author's version of the work. It is posted here by permission of Springer for personal use, not for redistribution. The definitive version was published in Estuaries and Coasts 36 (2013): 74-97, doi:10.1007/s12237-012-9560-5.Biogeochemical cycles in estuaries are regulated by a diverse set of physical and biological variables that operate over a variety of time scales. Using in situ optical sensors, we conducted a high-frequency time-series study of several biogeochemical parameters at a mooring in central Long Island Sound from May to August 2010. During this period, we documented well-defined diel cycles in nitrate concentration that were correlated to dissolved oxygen, wind stress, tidal mixing, and irradiance. By filtering the data to separate the nitrate time series into various signal components, we estimated the amount of variation that could be ascribed to each process. Primary production and surface wind stress explained 59% and 19%, respectively, of the variation in nitrate concentrations. Less frequent physical forcings, including large-magnitude wind events and spring tides, served to decouple the relationship between oxygen, nitrate, and sunlight on about one-quarter of study days. Daytime nitrate minima and dissolved oxygen maxima occurred nearly simultaneously on the majority (> 80%) of days during the study period; both were strongly correlated with the daily peak in irradiance. Nighttime nitrate maxima reflected a pattern in which surface-layer stocks were depleted each afternoon and recharged the following night. Changes in nitrate concentrations were used to generate daily estimates of new primary production (182 ± 37 mg C m-2 d-1) and the f-ratio (0.25), i.e., the ratio of production based on nitrate to total production. These estimates, the first of their kind in Long Island Sound, were compared to values of community respiration, primary productivity, and net ecosystem metabolism, which were derived from in situ measurements of oxygen concentration. Daily averages of the three metabolic parameters were 1660 ± 431, 2080 ± 419, and 429 ± 203 mg C m-2 d-1, respectively. While the system remained weakly autotrophic over the duration of the study period, we observed very large day-to-day differences in the f-ratio and in the various metabolic parameters.This work was supported by the Yale Institute for Biospheric Studies, the Sounds Conservancy of the Quebec-Labrador Foundation, and the Yale School of Forestry and Environmental Studies Carpenter-Sperry Fund.2014-01-0