Nearly Blinking-Free, High-Purity Single-Photon Emission by Colloidal InP/ZnSe Quantum Dots

Colloidal core/shell InP/ZnSe quantum dots (QDs), recently produced using an improved synthesis method, have a great potential in life-science applications as well as in integrated quantum photonics and quantum information processing as single-photon emitters. Single-particle spectroscopy of 10-nm QDs with 3.2-nm cores reveals strong photon antibunching attributed to fast (70-ps) Auger recombination of multiple excitons. The QDs exhibit very good photostability under strong optical excitation. We demonstrate that the antibunching is preserved when the QDs are excited above the saturation intensity of the fundamental-exciton transition. This result paves the way towards their usage as high-purity on-demand single-photon emitters at room temperature. Unconventionally, despite the strong Auger blockade mechanism, InP/ZnSe QDs also display very little luminescence intermittency ("blinking"), with a simple on/off blinking pattern. The analysis of single-particle luminescence statistics places these InP/ZnSe QDs in the class of nearly blinking-free QDs, with emission stability comparable to state-of-the-art thick-shell and alloyed-interface CdSe/CdS, but with improved single-photon purity.Comment: 15 pages, 5 figure

Reduced-scale experiments and numerical simulations of informal settlement dwelling fires

Informal settlement dwellings (ISDs) house approximately one billion people in the developing world and this number is expected to double by the year 2030. Contemporary research on ISD fires has focused on understanding the fire dynamics within individual dwellings (micro-scale) and fire spread in settlements consisting of multiple dwellings (macro-scale). This paper aims to do two primary things: investigate if scaling methods that were derived for compartments with thermally thick boundaries can be applied to ISDs (compartments with thermally thin boundaries), and if they can adequately represent the most important phenomena associated with full-scale ISD fires; and demonstrate Fire Dynamics Simulator (FDS) simulations against the Reduced-Scale Experiments (RSEs) conducted in this work by comparing the simulation results and fire behaviour to that of the RSEs. In this work, five RSEs—a 1⁄15 scale, 1⁄10 scale, 1⁄7.5 scale, 1⁄5 scale and a 1⁄4 scale experiment—were conducted. The RSEs are based on the full-scale ISD fire experiments done by Cicione, et al., and were scaled using parameters such as Heat Release Rate (HRR) of the fuel packages, ventilation factors and the overall geometry of the dwellings. The full-scale experiment’s geometry is based on the ISO 9705 compartment fire test. Temperatures, heat fluxes and flame heights for each of the RSEs were recorded and analysed to determine the correlation of the fire behaviour between the RSEs and the full-scale experiments. The results from this study suggest that reduced-scale modeling with RSE models of 1/4 scale and 1/5 scale can be used to replicate an ISD fire with a reasonable level of certainty, depending on the parameter being studied. Limitations and challenges associated with the scaling methods employed are discussed, as not all fire phenomena can be accurately captured

Techno-economic, energy, and exergy analyses of invasive weed gasification for hydrogen enriched producer gas production

This research work deals with the examination of the techno-economic, exergy, and energy analyses of biomass gasification of the invasive weed Parthenium hysterophorus (PHP) using Steam - Carbon dioxide (CO2) as a gasifying agent with the support of simulation modeling for sustainable energy conversion process. The aim of this work is to simulate the gasification process through consideration of the impacts of various operating factors on gasification. This study attains the gradual increase in hydrogen (H2) concentration from 51% to 63% along with the rise in carbon monoxide (CO) from 14.5% to 19% using Aspen Plus simulation. CO2 falls concurrently from 24% to 13.5%. The findings demonstrate significant advancements over earlier studies in terms of both gas composition and overall system performance. A computational model has been developed for the estimation of energy performance indicators such as total energy input, and energy consumed per mass of biomass gasified, which are used in the determination of the system's energy efficiency. The exergy analysis of the system is performed to assess the system's total losses in terms of efficiency gathered from the system's exergy ratios. The economic analysis evaluates the system's economies of scale by gas production at ₹.15/kg and long-term sustainability. The proposed system has been found with the potential to produce a high yield of alternative energy from PHP with increased economic efficiency and lower environmental impact

Glare Reducing Windscreen Using Principle of Selective Reflection

ABSTRACT:Automobiles are prone to accidents due to glare effect at night. The scope of this research is to reduce the glare. Theconcept of Electrochromic glass was used. A windscreen was made up of a pair of float glass enclosed with Twisted Nematic Liquid Crystals. The liquid crystal material exhibited a property of selective reflection of incident light. A liquid crystal material E48 was used for this purpose and the results were studied. The wavelength of light within a narrow range which caused glare was selectively reflected. This resulted in reduced intensity of glare thus protecting the driver from glare during night travel

Application of nanotechnology in antimicrobial finishing of biomedical textiles

In recent years, the antimicrobial nanofinishing of biomedical textiles has become a very active, high-growth research field, assuming great importance among all available material surface modifications in the textile industry. This review offers the opportunity to update and critically discuss the latest advances and applications in this field. The survey suggests an emerging new paradigm in the production and distribution of nanoparticles for biomedical textile applications based on non-toxic renewable biopolymers such as chitosan, alginate and starch. Moreover, a relationship among metal and metal oxide nanoparticle (NP) size, its concentration on the fabric, and the antimicrobial activity exists, allowing the optimization of antimicrobial functionality.Andrea Zille (C2011-UMINHO-2C2T-01) acknowledges funding from Programa Compromisso para a Ciencia 2008, Portugal

Green fabrication of stable lead-free bismuth based perovskite solar cells using a non-toxic solvent

The very fast evolution in certified efficiency of lead-halide organic-inorganic perovskite solar cells to 24.2%, on par and even surpassing the record for polycrystalline silicon solar cells (22.3%), bears the promise of a new era in photovoltaics and revitalisation of thin film solar cell technologies. However, the presence of toxic lead and particularly toxic solvents during the fabrication process makes large-scale manufacturing of perovskite solar cells challenging due to legislation and environment issues. For lead-free alternatives, non-toxic tin, antimony and bismuth based solar cells still rely on up-scalable fabrication processes that employ toxic solvents. Here we employ non-toxic methyl-acetate solution processed (CH3NH3)3Bi2I9 films to fabricate lead-free, bismuth based (CH3NH3)3Bi2I9 perovskites on mesoporous TiO2 architecture using a sustainable route. Optoelectronic characterization, X-ray diffraction and electron microscopy show that the route can provide homogeneous and good quality (CH3NH3)3Bi2I9 films. Fine-tuning the perovskite/hole transport layer interface by the use of conventional 2,2′,7,7′-tetrakis (N,N′-di-p-methoxyphenylamino)−9,9′-spirbiuorene, known as Spiro-OMeTAD, and poly(3-hexylthiophene-2,5-diyl - P3HT as hole transporting materials, yields power conversion efficiencies of 1.12% and 1.62% under 1 sun illumination. Devices prepared using poly(3-hexylthiophene-2,5-diyl hole transport layer shown 300 h of stability under continuous 1 sun illumination, without the use of an ultra violet-filter