Numerical prediction of 3-D ejector flows

The use of parametric flow analysis, rather than parametric scale testing, to support the design of an ejector system offers a number of potential advantages. The application of available 3-D flow analyses to the design ejectors can be subdivided into several key elements. These are numerics, turbulence modeling, data handling and display, and testing in support of analysis development. Experimental and predicted jet exhaust for the Boeing 727 aircraft are examined

Development of acoustically lined ejector technology for multitube jet noise suppressor nozzles by model and engine tests over a wide range of jet pressure ratios and temperatures

An experimental program comprising model nozzle and full-scale engine tests was undertaken to acquire parametric data for acoustically lined ejectors applied to primary jet noise suppression. Ejector lining design technology and acoustical scaling of lined ejector configurations were the major objectives. Ground static tests were run with a J-75 turbojet engine fitted with a 37-tube, area ratio 3.3 suppressor nozzle and two lengths of ejector shroud (L/D = 1 and 2). Seven ejector lining configurations were tested over the engine pressure ratio range of 1.40 to 2.40 with corresponding jet velocities between 305 and 610 M/sec. One-fourth scale model nozzles were tested over a pressure ratio range of 1.40 to 4.0 with jet total temperatures between ambient and 1088 K. Scaling of multielement nozzle ejector configurations was also studied using a single element of the nozzle array with identical ejector lengths and lining materials. Acoustic far field and near field data together with nozzle thrust performance and jet aerodynamic flow profiles are presented

A user evaluation of hierarchical phrase browsing

Phrase browsing interfaces based on hierarchies of phrases extracted automatically from document collections offer a useful compromise between automatic full-text searching and manually-created subject indexes. The literature contains descriptions of such systems that many find compelling and persuasive. However, evaluation studies have either been anecdotal, or focused on objective measures of the quality of automatically-extracted index terms, or restricted to questions of computational efficiency and feasibility. This paper reports on an empirical, controlled user study that compares hierarchical phrase browsing with full-text searching over a range of information seeking tasks. Users found the results located via phrase browsing to be relevant and useful but preferred keyword searching for certain types of queries. Users experiences were marred by interface details, including inconsistencies between the phrase browser and the surrounding digital library interface

Examination of the Potential of Terrestrial Laser Scanning and Structure-from-Motion Photogrammetry for Rapid Nondestructive Field Measurement of Grass Biomass

Above ground biomass (AGB) is a parameter commonly used for assessment of grassland systems. Destructive AGB measurements, although accurate, are time consuming and are not easily undertaken on a repeat basis or over large areas. Structure-from-Motion (SfM) photogrammetry and Terrestrial Laser Scanning (TLS) are two technologies that have the potential to yield precise 3D structural measurements of vegetation quite rapidly. Recent advances have led to the successful application of TLS and SfM in woody biomass estimation, but application in natural grassland systems remains largely untested. The potential of these techniques for AGB estimation is examined considering 11 grass plots with a range of biomass in South Dakota, USA. Volume metrics extracted from the TLS and SfM 3D point clouds, and also conventional disc pasture meter settling heights, were compared to destructively harvested AGB total (grass and litter) and AGB grass plot measurements. Although the disc pasture meter was the most rapid method, it was less effective in AGB estimation (AGBgrass r2 = 0.42, AGBtotal r2 = 0.32) than the TLS (AGBgrass r2 = 0.46, AGBtotal r2 = 0.57) or SfM (AGBgrass r2 = 0.54, AGBtotal r2 = 0.72) which both demonstrated their utility for rapid AGB estimation of grass systems

Storage Device Sizing for a Hybrid Railway Traction System by Means of Bicausal Bond Graphs

In this paper, the application of bicausal bond graphs for system design in electrical engineering is emphasized. In particular, it is shown how this approach is very useful for model inversion and parameter dimensioning. To illustrate these issues, a hybrid railway traction device is considered as a case study. The synthesis of a storage device (a supercapacitor) included in this system is then discussed

Prediction of fatigue crack initiation under biaxial loading

This investigation revisits biaxial fatigue experiments carried out with the nickel-based superalloy termed Waspaloy. Recently, yield criteria extended to multiaxial fatigue and stress based approaches were analysed and their performance to correlate the biaxial test data was evaluated. It was concluded that despite their reliable results, the parameters did not properly represent the physical behaviour of the material. In this context, an extension of this study was executed considering the strain based critical plane approaches proposed by Fatemi-Socie (FS) and Smith- Watson-Topper (SWT). The first parameter presented overly conservative predictions with large scatter of results. In contrast, more accurate predictions were obtained with the SWT parameter

Rapid and reliable assessment of methane impacts on climate

It is clear that the most effective way to limit global temperature rise and associated impacts is to reduce human emissions of greenhouse gases, including methane. However, quantification of the climate benefits of mitigation options are complicated by the contrast in the timescales at which short-lived climate pollutants, such as methane, persist in the atmosphere compared to carbon dioxide. Whereas simple metrics fail to capture the differential impacts across all timescales, sophisticated climate models that can address these temporal dynamics are often inaccessible, time-intensive, require special infrastructure, and include high unforced interannual variability that makes it difficult to analyse small changes in forcings. On the other hand, reduced-complexity climate models that use basic knowledge from observations and complex Earth system models offer an ideal compromise in that they provide quick, reliable insights into climate responses, with only limited computational infrastructure needed. They are particularly useful for simulating the response to forcings of small changes in different climate pollutants, due to the absence of internal variability. In this paper, we build on previous evaluations of the freely available and easy-to-run reduced-complexity climate model MAGICC by comparing temperature responses to historical methane emissions to those from a more complex coupled global chemistry–climate model, GFDL-CM3. While we find that the overall forcings and temperature responses are comparable between the two models, the prominent role of unforced variability in CM3 demonstrates how sophisticated models are potentially inappropriate tools for small forcing scenarios. On the other hand, we find that MAGICC can easily and rapidly provide robust data on climate responses to changes in methane emissions with clear signals unfettered by variability. We are therefore able to build confidence in using reduced-complexity climate models such as MAGICC for purposes of understanding the climate implications of methane mitigation.</p

The Wow Factor? A Comparative Study of the Development of Student Music Teachers' Talents in Scotland and Australia

For some time there has been debate about differing perspectives on musical gift and musical intelligence. One view is that musical gift is innate: that it is present in certain individuals from birth and that the task of the teacher is to develop the potential which is there. A second view is that musical gift is a complex concept which includes responses from individuals to different environments and communities (Howe and Sloboda, 1997). This then raises the possibility that musical excellence can be taught. We have already explored this idea with practising musicians (Stollery and McPhee, 2002). Our research has now expanded to include music teachers in formation, and, in this paper, we look at the influences in their musical development which have either 'crystallised' or 'paralysed' the musical talent which they possess. Our research has a comparative dimension, being carried out in Scotland and in Australia. We conclude that there are several key influences in the musical development of the individual, including home and community support, school opportunities and teaching styles and that there may be education and culture-specific elements to these influences

Genetic matching of invasive populations of the African tulip tree, Spathodea campanulata Beauv.(Bignoniaceae), to their native distribution: Maximising the likelihood of selecting host-compatible biological control agents

Spathodea campanulata Beauv (Bignoniaceae) has become a highly damaging environmental and agricultural weed in the Pacific Islands. It has been targeted for biological control due to the costly and inefficient nature of physical and chemical control methods. Determining the origin of weed populations has been increasingly recognised as an important component of successful biological control programmes, and may be important for the biological control of S. campanulata due to the high degree of morphological variability within the species, as well as the broad native distribution. Genetic matching, using inter-simple sequence repeats (ISSR’s), and morphological data found support for invasive Pacific Island S. campanulata plants originating from West Africa. Pacific and West African plants were genetically most similar, and were differentiated from native plants from East/Central Africa by PCA and Bayesian-clustering (STRUCTURE) analyses. Genetic data was corroborated by morphological data which showed that West African and Pacific Islands plants had more sparsely pubescent leaves compared to plants from East/Central Africa. Populations in South Africa, where the plant is introduced but not problematic, originated from a different source population than those in the Pacific Islands, probably in East/Central Africa. A greater sampling effort is required before the origin of the South African populations can be determined with certainty. Herbivores and pathogens for the Pacific Islands should be collected from West Africa as they are more likely to be compatible with S. campanulata plants in this region