Enhanced photocatalytic degradation of methylene blue: Preparation of TiO2/reduced graphene oxide nanocomposites by direct sol-gel and hydrothermal methods

In this study, two different preparation methods of titanium dioxide nanoparticles/reduced graphene oxide nanocomposites were investigated using direct sol-gel method followed by hydrothermal treatment or simple hydrothermal route. A different amount of graphene (1- 20%) was mixed with TiO2 for both series of samples in order to improve the photocatalytic activity. The influence of the preparation method on the physico-chemical properties was established by different characterization methods and the photocatalytic degradation of methylene blue (MB) under UV light irradiation was used as test reaction. The highest photocatalytic activity was observed for the nanocomposites containing 10 wt% of graphene. The elimination of MB can reach 93% and 82% for the nanocomposites with 10 wt% graphene prepared by the sol-gel and hydrothermal methods, respectively. These photocatalysts are promising for practical application in nanotechnology.Postprint (author's final draft

Characterization of gsp-Mediated Growth Hormone Excess in the Context of McCune-Albright Syndrome

McCune-Albright syndrome (MAS) is a disorder characterized by the triad of café-au-lait skin pigmentation, polyostotic fibrous dysplasia of bone, and hyperfunctioning endocrinopathies, including GH excess. The molecular etiology of the disease is postzygotic activating mutations of the GNAS1 gene product, Gsα. The term gsp oncogene has been assigned to these mutations due to their association with certain neoplasms. The aim of this study was to estimate the prevalence of GH excess in MAS, characterize the clinical and endocrine manifestations, and describe the response to treatment. Fifty-eight patients with MAS were screened, and 22 with stigmata of acromegaly and/or elevated GH or IGF-I underwent oral glucose tolerance testing. Twelve patients (21%) had GH excess, based on failure to suppress serum GH on oral glucose tolerance test, and underwent a TRH test, serial GH sampling from 2000-0800 h, and magnetic resonance imaging of the sella. We found that vision and hearing deficits were more common in patients with GH excess (4 of 12, 33%) than those without (2 of 56, 4%). Of interest, patients with a history of precocious puberty and GH excess who had reached skeletal maturity achieved normal adult height despite a history of early epiphyseal fusion. All 9 patients tested had an increase in serum GH after TRH, 11 of 12 (92%) had hyperprolactinemia, and all 8 tested had detectable or elevated nighttime GH levels. Pituitary adenoma was detected in 4 of 12 (33%) patients. All patients with elevated IGF-I levels were treated with cabergoline (7 patients), long-acting octreotide (LAO; 8 patients), or a combination of cabergoline and LAO (4 patients). In six of the seven patients (86%) treated with cabergoline, serum IGF-I decreased, but not to the normal range. In the eight patients treated with LAO alone, IGF-I decreased, and, in four, returned to the normal range. The remaining 4 patients were treated with a combination of cabergoline and LAO. For them, symptoms of GH excess diminished, and IGF-I decreased further, but did not enter the normal range. GH excess is common in MAS and results in a distinct clinical phenotype characterized by inappropriately normal stature, TRH responsiveness, prolactin cosecretion, small or absent pituitary tumors, a consistent but inadequate response to treatment with cabergoline, and an intermediate response to LAO

Efficient preparation of Arabidopsis pollen tubes for ultrastructural analysis using chemical and cryo-fixation

The pollen tube (PT) serves as a model system for investigating plant cell growth and morphogenesis. Ultrastructural studies are indispensable to complement data from physiological and genetic analyses, yet an effective method is lacking for PTs of the model plant Arabidopsis thaliana. Methods: Here, we present reliable approaches for ultrastructural studies of Arabidopsis PTs, as well as an efficient technique for immunogold detection of cell wall epitopes. Using different fixation and embedding strategies, we show the amount of PT ultrastructural details that can be obtained by the different methods. Results: Dozens of cross-sections can be obtained simultaneously by the approach, which facilitates and shortens the time for evaluation. In addition to in vitro-grown PTs, our study follows the route of PTs from germination, growth along the pistil, to the penetration of the dense stylar tissue, which requires considerable mechanical forces. To this end, PTs have different strategies from growing between cells but also between the protoplast and the cell wall and even within each other, where they share a partly common cell wall. The separation of PT cell walls in an outer and an inner layer reported for many plant species is less clear in Arabidopsis PTs, where these cell wall substructures are connected by a distinct transition zone. Conclusions: The major advancement of this method is the effective production of a large number of longitudinal and cross-sections that permits obtaining a detailed and representative picture of pollen tube structures in an unprecedented way. This is particularly important when comparing PTs of wild type and mutants to identify even subtle alterations in cytoarchitecture. Arabidopsis is an excellent plant for genetic manipulation, yet the PTs, several-times smaller compared to tobacco or lily, represent a technical challenge. This study reveals a method to overcome this problem and make Arabidopsis PTs more amenable to a combination of genetic and ultrastructural analyses

Autoimmune gastrointestinal complications in patients with Systemic Lupus Erythematosus: case series and literature review

The association of systemic lupus erythematosus (SLE) with gastrointestinal autoimmune diseases is rare, but has been described in the literature, mostly as case reports. However, some of these diseases may be very severe, thus a correct and early diagnosis with appropriate management are fundamental. We have analysed our data from the SLE patient cohort at University College Hospital London, established in 1978, identifying those patients with an associated autoimmune gastrointestinal disease. We have also undertaken a review of the literature describing the major autoimmune gastrointestinal pathologies which may be coincident with SLE, focusing on the incidence, clinical and laboratory (particularly antibody) findings, common aetiopathogenesis and complications

The Enhanced Adsorption Capacity of <em>Ziziphus jujuba</em> Stones Modified with Ortho-Phosphoric Acid for Organic Dye Removal: A Gaussian Process Regression Approach

\ua9 2024 by the authors. Here, the chemical modification of Ziziphus jujuba stones (ZJS) treated with ortho-phosphoric acid (ZJS-H3PO4) is investigated to enhance its adsorption properties for organic dyes. The physicochemical properties of ZJS-H3PO4 reveal increased porosity (87.29%), slightly higher bulk density (0.034 g mL−1), and enhanced acidity (31.42 m eq g g−1) compared to untreated ZJS. XRF analysis confirms the successful incorporation of orthophosphoric acid during treatment due to a significant increase in phosphorus content. The maximum adsorption capacity of methylene blue on ZJS-H3PO4 is found to be 179.83 mg g−1, demonstrating its efficacy as a potential adsorbent for organic dyes. These findings suggest that modifying ZJS with orthophosphoric acid could be a promising strategy to enhance its adsorption performance in various environmental applications. Furthermore, Gaussian process regression (GPR) is employed to model MB adsorption by ZJS-H3PO4. Optimization of the GPR model involves evaluating different kernel functions and meticulously adjusting parameters to maximize its ability to capture complex relationships in the data. The obtained GPR model demonstrates remarkable performance with high correlation coefficients (R) and low root mean square errors (RMSEs) across all study phases. Model validation is performed through residual analysis, confirming its effectiveness and accuracy in predicting MB adsorption. Finally, a user-friendly interface is developed to facilitate the usage of the GPR model in future applications, representing a significant advancement in environmental process modeling and ecosystem management

Powder Compaction: Compression Properties of Cellulose Ethers

Effective development of matrix tablets requires a comprehensive understanding of different raw material attributes and their impact on process parameters. Cellulose ethers (CE) are the most commonly used pharmaceutical excipients in the fabrication of hydrophilic matrices. The innate good compression and binding properties of CE enable matrices to be prepared using economical direct compression (DC) techniques. However, DC is sensitive to raw material attributes, thus, impacting the compaction process. This article critically reviews prior knowledge on the mechanism of powder compaction and the compression properties of cellulose ethers, giving timely insight into new developments in this field

Railway-induced ground vibrations – a review of vehicle effects

This paper is a review of the effect of vehicle characteristics on ground- and track borne-vibrations from railways. It combines traditional theory with modern thinking and uses a range of numerical analysis and experimental results to provide a broad analysis of the subject area. First, the effect of different train types on vibration propagation is investigated. Then, despite not being the focus of this work, numerical approaches to vibration propagation modelling within the track and soil are briefly touched upon. Next an in-depth discussion is presented related to the evolution of numerical models, with analysis of the suitability of various modelling approaches for analysing vehicle effects. The differences between quasi-static and dynamic characteristics are also discussed with insights into defects such as wheel/rail irregularities. Additionally, as an appendix, a modest database of train types are presented along with detailed information related to their physical attributes. It is hoped that this information may provide assistance to future researchers attempting to simulate railway vehicle vibrations. It is concluded that train type and the contact conditions at the wheel/rail interface can be influential in the generation of vibration. Therefore, where possible, when using numerical approach, the vehicle should be modelled in detail. Additionally, it was found that there are a wide variety of modelling approaches capable of simulating train types effects. If non-linear behaviour needs to be included in the model, then time domain simulations are preferable, however if the system can be assumed linear then frequency domain simulations are suitable due to their reduced computational demand

Advanced green peel utilization for efficient methylene blue removal: Integrated analysis and predictive modeling

This study explores the adsorption of Methylene Blue (MB) onto Green Peel (GP) material, utilizing advanced analytical techniques and modeling approaches. Fourier-transform infrared spectroscopy (FT-IR) confirms GP\u27s effectiveness as an adsorbent. The study systematically examines the influence of key factors such as adsorbent dose, pH, MB concentration, and temperature on adsorption efficiency. Among the isotherm models analyzed, the monolayer with double energy (M2) model is identified as the most accurate for describing MB adsorption onto GP. Steric parameters provide insights into the adsorption mechanism, revealing temperature-dependent changes. Thermodynamic analysis indicates an exothermic adsorption process, with a decrease in adsorption capacity at elevated temperatures. Density Function Theory (DFT) analysis highlights the potential for electron transfer during adsorption, contributing to a deeper understanding of the process. Molecular Dynamic Simulation (MDS) uncovers stable adsorption configurations and reveals the significance of chemical interactions and Van der Waals forces. Gaussian Process Regression with L\ue9vy Flight Distribution (GPR_LFD) demonstrates exceptional predictive accuracy, closely aligning experimental and predicted MB uptake values. Optimal adsorption conditions (30 minutes contact time, 0.6 g adsorbent dose, 400 mg/L initial MB concentration, pH 6.6, and 10\ub0C) yield an adsorption capacity of 207.90 mg/g. The integration of LFD optimization and GPR prediction through a MATLAB interface further enhances the practical application of these findings. This comprehensive investigation not only advances the understanding of MB adsorption onto GP but also highlights GP\u27s potential as an efficient, reusable adsorbent

Optimising Lead–Air Battery Performance through Innovative Open-Cell Foam Anodes

\ua9 2024 by the authors.In the dynamic realm of sustainable energy storage technologies, the global research landscape presents myriad scientific and economic challenges. The erratic growth of renewable energies alongside the phasing out of conventional power plants poses a significant hurdle in maintaining a stable balance between energy supply and demand. Consequently, energy storage solutions play a pivotal role in mitigating substantial fluctuations in demand. Metal–air batteries, distinguished by their superior energy density and enhanced safety profile compared to other storage devices, emerge as promising solutions. Leveraging the well-established lead–acid battery technology, this study introduces a novel approach utilising open-cell foam manufactured through the Excess Salt Replication process as an anode for lead–air battery cells. This innovation not only conserves lead but also reduces battery weight. By employing a 25% antimonial lead alloy, open-cell foams with diameters ranging from 2 mm to 5 mm were fabricated for the antimonial lead–air battery. Preliminary findings suggest that the effective electrical conductivity of primary battery cells, measured experimentally, surpasses that of cells composed of the same dense, non-porous antimonial lead alloy. This improvement is primarily attributed to their extensive specific surface area, facilitating oxidation–reduction reactions. A correlation between effective electrical conductivity and cell diameter is established, indicating optimal conductivity achieved with a 5 mm cell diameter. These results underscore the feasibility of implementing such an electrical system