Wildlife park of Etna

Mount Etna is located west of the east coast of Sicily, within the territory of the province of Catania and is crossed by 15\u2019 meridian east, which it takes its name. It\u2019s occupies an area of 1570 . It\u2019s dimensions place it among the largest in the world and, from the geological standpoint, the highest of the European continent

Application of NASTRAN/COSMIC in the analysis of ship structures to underwater explosion shock

The application of NASTRAN/COSMIC in predicting the transient motion of ship structures to underwater, non-contact explosions is discussed. Examples illustrate the finite element models, mathematical formulations of loading functions and, where available, comparisons between analytical and experimental results

Generation of an ultrastable 578 nm laser for Yb lattice clock

In this paper we described the development and the characterization of a 578 nm laser source to be the clock laser for an Ytterbium Lattice Optical clock. Two independent laser sources have been realized and the characterization of the stability with a beat note technique is presente

Stress growth and relaxation of dendritically branched macromolecules in shear and uniaxial extension

We present unique nonlinear rheological data of well-defined symmetric Cayley-tree poly(methyl methacrylates) in shear and uniaxial extension. Earlier work has shown that their linear viscoelasticity is governed by the hierarchical relaxation of different generations, whereas the segments between branch points are responsible for their substantial strain hardening as compared to linear homopolymers of the same total molar mass at the same value of imposed stretch rate. Here, we extend that work in order to obtain further experimental evidence that will help understanding the molecular origin of the remarkable properties of these highly branched macromolecules. In particular, we address three questions pertinent to the specific molecular structure: (i) is steady state attainable during uniaxial extension? (ii) what is the respective transient response in simple shear? and (iii) how does stress relax upon cessation of extension or shear? To accomplish our goal we utilize state-of-the-art instrumentation, i.e., filament stretching rheometry (FSR) and cone-partitioned plate (CPP) shear rheometry for polymers with 3 and 4 generations, and complement it with state-of-the-art modeling predictions using the Branch-on-Branch (BoB) algorithm. The data indicates that the extensional viscosity reaches a steady state value, whose dependence on extension rate is identical to that of entangled linear and other branched polymer melts. Nonlinear shear is characterized by transient stress overshoots and the validity of the Cox-Merz rule. Remarkably, nonlinear stress relaxation is much broader and slower in extension compared to shear. It is also slower at higher generation, and rate-independent for rates below the Rouse rate of the outer segment. For extension, the relaxation time is longer than that of the linear stress relaxation, suggesting a strong ‘elastic memory’ of the material. These results are 2 described by BoB semi-quantitatively, both in linear and nonlinear shear and extensional regimes. Given the fact that the segments between branch points are less than 3 entanglements long, this is a very promising outcome that gives confidence in using BoB for understanding the key features. Moreover, the response of the segments between generations controls the rheology of the Cayley trees. Their substantial stretching in uniaxial extension appears responsible for strain hardening, whereas coupling of stretches of different parts of the polymer appears to be the origin of the slower subsequent relaxation of extensional stress. Concerning the latter effect, for which predictions are not available, it is hoped that the present experimental findings and proposed framework of analysis will motivate further developments in the direction of molecular constitutive models for branched and hyperbranched polymers

Identification of Measurement Points for Calibration of Water Distribution Network Models

AbstractMuch importance is given to determining the input data for water distribution system networks, particularly with regard to urban networks, because the design and the management of WDS are based on a verification model. Good calibration of models is required to obtain realistic results. This is possible by the use of a certain number of measurements: flow in pipes and pressure in nodes. The purpose of this paper is to analyze a new model able to provide guidance on the choice of measurement points to obtain the site data. All analyses are carried out firstly on literature networks and then on a real network using a new approach based on sensitivity matrices

A device to characterize optical fibres

ATLAS is a general purpose experiment approved for the LHC collider at CERN. An important component of the detector is the central hadronic calorimeter; for its construction more than 600,000 Wave Length Shifting (WLS) fibres (corresponding to a total length of 1,120 Km) have been used. We have built and put into operation a dedicated instrument for the measurement of light yield and attenuation length over groups of 20 fibres at a time. The overall accuracy achieved in the measurement of light yield (attenuation length) is 1.5% (3%). We also report the results obtained using this method in the quality control of a large sample of fibres.Comment: 17 pages 20 figeres submitted to NIM journa

Polynomial Approach for Filtering and Identification of a Class of Uncertain Systems

Abstract this paper considers the filtering and identification problems for a class of discrete-time uncertain stochastic systems that admit a finite number of linear working modes. It is shown here that this class of uncertain systems can be modeled by using a suitably defined extended system, whose state evolves according to a bilinear model. A polynomial filtering algorithm is derived for such extended system, which readily provides the polynomial estimates of both the original state and the working mode. Simulations show the effectiveness of the proposed approach and the improvements with respect to standard linear filtering algorithms

Solvent extraction study of the thorium nitrate, nitric acid, and tributyl phosphate-dodecane system: density and acidity relationships

A solvent extraction study to determine equilibrium conditions of thorium nitrate-nitric acid with 30% tributyl phosphate in normal dodecane has been completed. Experimental conditions studied were 30 to 60{sup 0}C, 0.05 to 1.5 M Th(NO{sub 3}){sub 4}, and 0.0 to 3.0 M HNO{sub 3}. The extractant concentration was constant at 30% tributyl phosphate. The equilibrium experiments have produced data which demonstrate that thorium nitrate concentration, free acid, and density are related in equilibrium behavior between the aqueous and organic phases from 30 to 60{sup 0}C in the 30% tributyl phosphate-dodecane solvent extraction system. The concentration interactions apply to both the two- and three-phase regions. A linear correlation was observed for the density (D) of the aqueous or organic phase and the concentration of thorium and free acid. The general form of the equation is D = a(C/sub Th/ + bC/sub H/) + c, where a is the slope, b is the constant, c is the intercept, and C/sub Th/ and C/sub H/ are the molar concentrations of thorium and free acid respectively. The relationship of temperature, thorium nitrate, and free acid makes possible the definitions of the boundaries between the two- and three-phase regions. This dependence, in turn, permits operational control or simulation studies of the system within the two-phase region. The data demonstrate the interactions of the components of the Thorex system and can be used to improve the mathematical description of equilibrium in the SEPHIS-Thorex computer program