RF-MEMS switch actuation pulse optimization using Taguchi's method

Copyright @ 2011 Springer-VerlagReliability and longevity comprise two of the most important concerns when designing micro-electro-mechanical-systems (MEMS) switches. Forcing the switch to perform close to its operating limits underlies a trade-off between response bandwidth and fatigue life due to the impact force of the cantilever touching its corresponding contact point. This paper presents for first time an actuation pulse optimization technique based on Taguchi’s optimization method to optimize the shape of the actuation pulse of an ohmic RF-MEMS switch in order to achieve better control and switching conditions. Simulation results show significant reduction in impact velocity (which results in less than 5 times impact force than nominal step pulse conditions) and settling time maintaining good switching speed for the pull down phase and almost elimination of the high bouncing phenomena during the release phase of the switch

Protein folding mediated by solvation: water expelling and formation of the hydrophobic core occurs after the structure collapse

The interplay between structure-search of the native structure and desolvation in protein folding has been explored using a minimalist model. These results support a folding mechanism where most of the structural formation of the protein is achieved before water is expelled from the hydrophobic core. This view integrates water expulsion effects into the funnel energy landscape theory of protein folding. Comparisons to experimental results are shown for the SH3 protein. After the folding transition, a near-native intermediate with partially solvated hydrophobic core is found. This transition is followed by a final step that cooperatively squeezes out water molecules from the partially hydrated protein core.Comment: Proceedings of the National Academy of Science, 2002, Vol.99. 685-69

New Early Eocene mammalian fauna from western Patagonia, Argentina

Two new fossil mammal localities from the Paleogene of central-western Patagonia are preliminarily described as the basis for a new possible biochronological unit for the early Eocene of Patagonia, correlated as being between two conventional SALMAs, the Riochican (older) and the Vacan subage of the Casamayoran SALMA. The mammal-bearing strata belong to the Middle Chubut River Volcanic-Pyroclastic Complex (northwestern Chubut Province, Argentina), of Paleocene-Eocene age. This complex includes a variety of volcaniclastic, intrusive, pyroclastic, and extrusive rocks deposited after the K-T boundary. Geochronological data taken from nearby volcanic deposits that underlie and overlie the mammal-bearing levels indicate that both faunas are of late early Eocene age (Ypresian-Lutetian boundary). In addition to more than 50 species of mammals, including marsupials, ungulates, and xenarthrans, two lower molars are the oldest evidence of bats in South America. Paleobotanical and palynological evidence from inferred contemporary localities nearby indicate subtropical environments characterized by warm and probably moderately humid climate. Remarkably, this new fauna is tentatively correlated with Eocene mammals from the La Meseta Formation in the Antarctic Peninsula. We conclude that the two localities mentioned above are part of a possible new biochronological unit, but the formal proposal of a new SALMA awaits completion of taxonomic analysis of the materials reported upon here. If the La Meseta fauna is correlated biochronologically to western Patagonia, this also suggests a continental extension of the biogeographic Weddelian Province as far north as central-western Patagonia

Assessment of chemical-crosslink-assisted protein structure modeling in CASP13

International audienceWith the advance of experimental procedures obtaining chemical crosslinking information is becoming a fast and routine practice. Information on crosslinks can greatly enhance the accuracy of protein structure modeling. Here, we review the current state of the art in modeling protein structures with the assistance of experimentally determined chemical crosslinks within the framework of the 13th meeting of Critical Assessment of Structure Prediction approaches. This largest‐to‐date blind assessment reveals benefits of using data assistance in difficult to model protein structure prediction cases. However, in a broader context, it also suggests that with the unprecedented advance in accuracy to predict contacts in recent years, experimental crosslinks will be useful only if their specificity and accuracy further improved and they are better integrated into computational workflows

Knowledge-based energy functions for computational studies of proteins

This chapter discusses theoretical framework and methods for developing knowledge-based potential functions essential for protein structure prediction, protein-protein interaction, and protein sequence design. We discuss in some details about the Miyazawa-Jernigan contact statistical potential, distance-dependent statistical potentials, as well as geometric statistical potentials. We also describe a geometric model for developing both linear and non-linear potential functions by optimization. Applications of knowledge-based potential functions in protein-decoy discrimination, in protein-protein interactions, and in protein design are then described. Several issues of knowledge-based potential functions are finally discussed.Comment: 57 pages, 6 figures. To be published in a book by Springe

Molecular dynamics simulations of the growth of poly(chloro-para-xylylene) films

Parylene C, poly(chloro-para-xylylene) is the most widely used member of the parylene family due to its excellent chemical and physical properties. In this work we analyzed the formation of the parylene C film using molecular mechanics and molecular dynamics methods. A five unit chain is necessary to create a stable hydrophobic cluster and to adhere to a covered surface. Two scenarios were deemed to take place. The obtained results are consistent with a polymer film scaling growth mechanism and contribute to the description of the dynamic growth of the parylene C polymer

Subarachnoid Space: New Tricks by an Old Dog

PURPOSE: The purpose of the study was to: (1) evaluate the subarachnoid space (SAS) width and pial artery pulsation in both hemispheres, and (2) directly compare magnetic resonance imaging (MRI) to near-infrared transillumination/backscattering sounding (NIR-T/BSS) measurements of SAS width changes in healthy volunteers. METHODS: The study was performed on three separate groups of volunteers, consisting in total of 62 subjects (33 women and 29 men) aged from 16 to 39 years. SAS width was assessed by MRI and NIR-T/BSS, and pial artery pulsation by NIR-T/BSS. RESULTS: In NIR-T/BSS, the right frontal SAS was 9.1% wider than the left (p<0.01). The SAS was wider in men (p<0.01), while the pial artery pulsation was higher in women (p<0.01). Correlation and regression analysis of SAS width changes between the back- and abdominal-lying positions measured with MRI and NIRT-B/SS demonstrated high interdependence between both methods (r = 0.81, p<0.001). CONCLUSIONS: NIR-T/BSS and MRI were comparable and gave equivalent modalities for the SAS width change measurements. The SAS width and pial artery pulsation results obtained with NIR-T/BSS are consistent with the MRI data in the literature related to sexual dimorphism and morphological asymmetries between the hemispheres. NIR-T/BSS is a potentially cheap and easy-to-use method for early screening in patients with brain tumours, increased intracranial pressures and other abnormalities. Further studies in patients with intracranial pathologies are warranted

Optimization of transition edge sensor arrays for cosmic microwave background observations with the South Pole Telescope

In this paper, we describe the optimization of transition-edge-sensor (TES) detector arrays for the third-generation camera for the South Pole Telescope. The camera, which contains ~16 000 detectors, will make high-angular-resolution maps of the temperature and polarization of the cosmic microwave background. Our key results are scatter in the transition temperature of Ti/Au TESs is reduced by fabricating the TESs on a thin Ti(5 nm)/Au(5 nm) buffer layer and the thermal conductivity of the legs that support our detector islands is dominated by the SiOx dielectric in the microstrip transmission lines that run along the legs

Analysis of the Effects of Polymorphism on Pollen Profilin Structural Functionality and the Generation of Conformational, T- and B-Cell Epitopes

An extensive polymorphism analysis of pollen profilin, a fundamental regulator of the actin cytoskeleton dynamics, has been performed with a major focus in 3D-folding maintenance, changes in the 2-D structural elements, surface residues involved in ligands-profilin interactions and functionality, and the generation of conformational and lineal B- and T-cell epitopes variability. Our results revealed that while the general fold is conserved among profilins, substantial structural differences were found, particularly affecting the special distribution and length of different 2-D structural elements (i.e. cysteine residues), characteristic loops and coils, and numerous micro-heterogeneities present in fundamental residues directly involved in the interacting motifs, and to some extension these residues nearby to the ligand-interacting areas. Differential changes as result of polymorphism might contribute to generate functional variability among the plethora of profilin isoforms present in the olive pollen from different genetic background (olive cultivars), and between plant species, since biochemical interacting properties and binding affinities to natural ligands may be affected, particularly the interactions with different actin isoforms and phosphoinositides lipids species. Furthermore, conspicuous variability in lineal and conformational epitopes was found between profilins belonging to the same olive cultivar, and among different cultivars as direct implication of sequences polymorphism. The variability of the residues taking part of IgE-binding epitopes might be the final responsible of the differences in cross-reactivity among olive pollen cultivars, among pollen and plant-derived food allergens, as well as between distantly related pollen species, leading to a variable range of allergy reactions among atopic patients. Identification and analysis of commonly shared and specific epitopes in profilin isoforms is essential to gain knowledge about the interacting surface of these epitopes, and for a better understanding of immune responses, helping design and development of rational and effective immunotherapy strategies for the treatment of allergy diseases. [EN]This study was supported by the following European Regional Development Fund co-financed grants: MCINN BFU 2004-00601/BFI, BFU 2008-00629, BFU2011-22779, CICE (Junta de Andalucía) P2010-CVI15767, P2010-AGR6274 and P2011-CVI-7487, and by the coordinated project Spain/Germany MEC HA2004-0094. JCJ-L thanks Spanish CSIC and the European Marie Curie research program for his I3P-BPD-CSIC, and PIOF-GA-2011-301550 grants, respectively.Peer reviewe

An analysis and evaluation of the WeFold collaborative for protein structure prediction and its pipelines in CASP11 and CASP12

Every two years groups worldwide participate in the Critical Assessment of Protein Structure Prediction (CASP) experiment to blindly test the strengths and weaknesses of their computational methods. CASP has significantly advanced the field but many hurdles still remain, which may require new ideas and collaborations. In 2012 a web-based effort called WeFold, was initiated to promote collaboration within the CASP community and attract researchers from other fields to contribute new ideas to CASP. Members of the WeFold coopetition (cooperation and competition) participated in CASP as individual teams, but also shared components of their methods to create hybrid pipelines and actively contributed to this effort. We assert that the scale and diversity of integrative prediction pipelines could not have been achieved by any individual lab or even by any collaboration among a few partners. The models contributed by the participating groups and generated by the pipelines are publicly available at the WeFold website providing a wealth of data that remains to be tapped. Here, we analyze the results of the 2014 and 2016 pipelines showing improvements according to the CASP assessment as well as areas that require further adjustments and research