2,738 research outputs found
Active Reflection Absorption for a Three Dimensional Multidirectional Wave Generator
In order to implement an accurate system that allows for absorption of reflected
waves impinging to a wave maker (Active Reflection Absorption), it was required to
apply a method to estimate properly the direction of arrival of the waves that does it in
the fastest way possible. Our wavemaker control system has been prepared to handle an
algorithm provided by Bosch-Rexroth where the wave angle estimation is practically
locked to a very narrow frequency band (spatial gain-mixer). The system was evaluated
with physical tests in a 3D wave basin for different conditions of reflected waves
arriving with an angle to the wavemaker front, and acceptable performance has been
found for the 3D ARA mode. However, for certain conditions over-compensation or
sub-compensation can develop resulting in a poor absorption. This is mainly related to
not being able to determine accurately the direction from which the reflected waves
travel towards the wavemaker.
The present work employed concepts found in the areas of antenna array signal
processing and signal propagation, which were applied to this problem. This approach coupled naturally with our wavemaker system since it was prepared with 48 gages that
can be employed in an array antenna fashion. A program was codified from an algorithm
found in literature to calculate the Direction of Arrival (DOA) of the reflected waves.
The focus for the testing of this program was with regular waves.
The tests were conducted to validate the program with different angles of
incidence and show that for regular waves the program was able to detect accurately the
DOA of these in as few as 5 snapshots, with a minimum of 7 gages used as the antenna
input. With data obtained directly from the control system of our wavemaker using
regular waves, the program was able to determine the DOA. The computational burden
of the algorithm is not significant in the case of regular waves. A modification of the
program is required to analyze the DOA of reflected irregular waves, which could
increase the computational burden. Actual implementation of this program to our control
system depends on cooperation with Bosch-Rexroth
Active Reflection Absorption for a Three Dimensional Multidirectional Wave Generator
In order to implement an accurate system that allows for absorption of reflected
waves impinging to a wave maker (Active Reflection Absorption), it was required to
apply a method to estimate properly the direction of arrival of the waves that does it in
the fastest way possible. Our wavemaker control system has been prepared to handle an
algorithm provided by Bosch-Rexroth where the wave angle estimation is practically
locked to a very narrow frequency band (spatial gain-mixer). The system was evaluated
with physical tests in a 3D wave basin for different conditions of reflected waves
arriving with an angle to the wavemaker front, and acceptable performance has been
found for the 3D ARA mode. However, for certain conditions over-compensation or
sub-compensation can develop resulting in a poor absorption. This is mainly related to
not being able to determine accurately the direction from which the reflected waves
travel towards the wavemaker.
The present work employed concepts found in the areas of antenna array signal
processing and signal propagation, which were applied to this problem. This approach coupled naturally with our wavemaker system since it was prepared with 48 gages that
can be employed in an array antenna fashion. A program was codified from an algorithm
found in literature to calculate the Direction of Arrival (DOA) of the reflected waves.
The focus for the testing of this program was with regular waves.
The tests were conducted to validate the program with different angles of
incidence and show that for regular waves the program was able to detect accurately the
DOA of these in as few as 5 snapshots, with a minimum of 7 gages used as the antenna
input. With data obtained directly from the control system of our wavemaker using
regular waves, the program was able to determine the DOA. The computational burden
of the algorithm is not significant in the case of regular waves. A modification of the
program is required to analyze the DOA of reflected irregular waves, which could
increase the computational burden. Actual implementation of this program to our control
system depends on cooperation with Bosch-Rexroth
Registro de prestaciones de salud y su incidencia en el presupuesto del Seguro Integral de Salud del Hospital Regional Zacarías Correa Valdivia Huancavelica - 2016
Objetivo: Establecer la correlación entre el registro de prestaciones de salud y el presupuesto del Seguro Integral de Salud del Hospital Regional Zacarías Valdivia Huancavelica-2016.
Material y método: Para obtener los datos referentes al registro de beneficios de salud, se utilizó una guía de análisis documental consistente en 23 ítems y para la variable Presupuesto del Seguro Integral de Salud, se utilizó la guía para el análisis documental presupuestario del Seguro Integral de Salud. El estudio es de tipo básico, el nivel de investigación alcanzado pertenece a la correlación, el método de investigación que se utilizó corresponde al hipotético-deductivo y estadístico. El diseño de investigación al que corresponde este trabajo es transversal no experimental. La muestra consistió en 46735 beneficiarios de salud.
Resultados: La frecuencia más alta de beneficios para la salud realizado durante el 2016 pertenece al mes de febrero con 4300 beneficiarios y con un presupuesto asignado de S/.511,807.08 soles; Para el mes de junio, hubo un menor número de beneficios para la salud con un valor de 3232 beneficiarios y presupuesto correspondiente a S/. 474,946.72 soles. Asimismo, para los meses de enero, marzo, abril, julio, agosto, septiembre, octubre, noviembre y diciembre, beneficios para la salud se realizaron por debajo del valor más alto, sin embargo, es evidente una mayor asignación presupuestaria. En agosto de 2016, se REGISTRO el mayor número de prestaciones rechazadas, correspondiente a un valor de 675 beneficios que causado un gasto de S/ 20,332.13 soles que no reembolsará al seguro Integral de salud, y la Zacarías Correa Hospital Regional fue responsable de dicho monto. Valdivia también revela la cantidad total de 6349 beneficios rechazado durante el año 2016 corresponde a S/. 521, 587.41
Conclusión: No se encontró relación significativa entre el registro de prestaciones de salud y el presupuesto del Seguro Integral de Salud, esto advierte que no existe una concordancia entre las cifras de prestaciones de salud y los presupuestos correspondientes a estos, debido a un incorrecto registro de las prestaciones de salud en el Formato Único de Atención y otros.Tesi
Normalización y estandarización de los procesos productivos de una empresa del sector manufacturero de la ciudad de Santiago de Cali, a través de la técnica de medición y estudio del trabajo
El estudio de métodos y tiempos tiene como finalidad y objetivo principal el
aumento de la productividad en las organizaciones, con el presente trabajo se
pretende realizar el diagnóstico de procesos y procedimientos de tareas que se
efectúan en la empresa objeto de estudio, para normalizarlos y estandarizarlos.
El trabajo documentará los procesos de una empresa manufacturera de la ciudad
de Cali, dedicada a la recuperación del plástico en casi todas sus formas,
recolectará información a través de la técnica de estudio ya mencionada.
Las actividades realizadas en el presente trabajo fueron: toma de datos,
observaciones de los métodos de trabajo y diligencia de los diferentes formatos
(diagramas) que se aplican mediante medición y estudio del trabajo. Esto facilitó el
manejo de la información y la forma como se realizan las operaciones.
El estudio de métodos registra los procedimientos existentes y proyectados al
llevar a cabo un trabajo, son formas sencillas y eficaces de aplicar y aumentar la
productividad. Por medio de los diagramas se pudo visualizar y establecer una
forma de ejecutar las tareas, de detallar el flujo de los materiales y la información a
través de ambas plantas, analizar la labor desempeñada por los operarios de
manera especifica de acuerdo a la especialidad de cada formato.
La medición del trabajo se aplicó para determinar el tiempo que invirtió un operario
calificado en realizar una tarea, para ejecutarla según una norma preestablecida.
El estudio de tiempos tiene como objetivo aumentar la productividad de acuerdo a
la fuerza laboral y a la optimización de los recursos. Lo que se pretendió fue
estimar el tiempo para fabricar una unidad o ejecutar una tarea en base a un
proceso actual. Se adicionó el tiempo suplementario que requiere una persona en
condiciones normales de trabajo: necesidades personales, refrigerios, almuerzos,
tiempo de preparación, entre otrosTrabajo de grado (Ingeniero Industrial)-- Universidad Autónoma de Occidente. Facultad de Ingeniería, 2007PregradoIngeniero(a) Industria
Adhesión al tratamiento de insuficiencia renal crónica en una comunidad del Estado de México.
Las consecuencias de la insuficiencia renal parecen enfocarse en las funciones motoras del cuerpo humano. La imposibilidad de movimiento a causa de la insuficiencia renal y sus consecuencias asociadas interactúan con las características sociodemográficas de los pacientes, así como de los profesionistas de la salud en la formación de actitudes hacia la insuficiencia renalEl objetivo del presente capítulo es mostrar el poder predictivo de un modelo psicosocial integral en el que se incluyen variables normativas, perceptuales, decisionales y comportamentales para el estudio de la adherencia al tratamiento y su relación con las actitudes de profesionales de la Salud Pública
Guía de Práctica Clínica para el Diagnóstico y Tratamiento de Esclerosis Múltiple en Adultos.
Multiple Sclerosis (MS) is a chronic disease of the central nervous system, for which there is still no definitive cure; but there is a diverse variety of therapies with the objective of modifying the course of the disease, which promotes the constant inclusion of new therapeutic strategies. Objective: The Peruvian Society of Neurology, as requested by the Peruvian Health Ministry, convened a committee of experts with the purpose of elaborating a clinical practice guideline for the diagnosis and treatment of MS. Method: Clinical practice guidelines were searched and evaluated according to the AGREE II methodology, choosing the Catalan Clinical Practice Guide as a model. The clinical questions not related to treatment were solved through a systematic review. The clinical treatment questions were assessed under the PICO format and were solved with a meta-analysis of clinical trials available until August 2017, considering the therapies approved by DIGEMID until January 2017. The final recommendations were elaborated using the modified Delphi method with a consensus of at least 80% of the members of its committee. Finally, an external revision of the manuscript was made by international experts in MS. Results: Eighteen clinical questions and twenty-one recommendations for management were developed, including therapeutic algorithms.La Esclerosis Múltiple (EM) es una enfermedad crónica del sistema nervioso central, para la cual aún no hay una cura definitiva; sin embargo, existe una diversa variedad de terapias con el objetivo de modificar el curso natural de la enfermedad, que promueve la inclusión constante de nuevas estrategias terapéuticas. Objetivo: La Sociedad Peruana de Neurología, por encargo del Ministerio de Salud, convocó a un comité de expertos con el objetivo de elaborar una guía de práctica clínica para el diagnóstico y tratamiento de EM. Método: Se realizó una búsqueda y evaluación de guías de práctica clínica bajo la metodología AGREE II, escogiendo como modelo la Guía de Práctica Clínica Catalana. Las preguntas clínicas no concernientes al tratamiento fueron resueltas a través de revisión sistemática. Las preguntas clínicas de tratamiento se diseñaron bajo el formato PICO y se resolvieron con un meta-análisis de ensayos clínicos disponibles hasta agosto del 2017, tomando en consideración las terapias aprobadas por DIGEMID hasta enero del 2017. Las recomendaciones finales fueron elaboradas mediante el método Delphi modificado con un consenso de al menos 80% de los miembros de su comité. Finalmente se realizó una revisión externa del manuscrito por expertos internacionales en EM. Resultados: Se formularon 18 preguntas clínicas y 21 recomendaciones para el manejo, incluyendo algoritmos terapéuticos
una mirada desde las Ciencias de la Conducta
Este libro es el resultado de los trabajos presentados en el 1er Congreso Internacional "Convivencia y bienestar con sentido humanista para una cultura de paz"
Tics as a pedagogical tool for the strengthening of interpersonal relationships and healthy coexistence
Las relaciones interpersonales son la esencia de la
convivencia. Actualmente resulta uno de los objetos
de mayor interés al interior de los colegios. Con base
a lo anterior se desarrolla el presente estudio que
tiene como objetivo fortalecer las relaciones interpersonales
y la sana convivencia en los estudiantes de
la Institución Educativa Departamental Santa Cruz
DE Bálsamo apoyados en las TIC como herramienta
pedagógica. La metodología empleada fue desde la
investigación cualitativa, con un alcance descriptivo,
se tomó como muestra (51) estudiantes de los grados
quinto y sexto. Dentro de los hallazgos encontrados,
se identifican diversos problemas de convivencia y
falta de comunicación asertiva, basados principalmente
en la poca aceptación a las formas de pensar
y actuar delos estudiantes, así como también frecuentes
problemas de bullying.Interpersonal relationships are the essence of coexistence.
Currently it is one of the objects of greatest
interest inside schools. Based on the above, the
present study is developed to strengthen interpersonal
relationships and healthy coexistence
in the students of the Departmental Educational
Institution Santa Cruz DE Bálsamo supported by
ICT as a pedagogical tool. The methodology used
was from qualitative research, with a descriptive
scope, was taken as sample 51 students of the
fifth and sixth grades. Within the found findings,
diverse problems of coexistence and lack of assertive
communication are identified, mainly based
on the low acceptance to the ways of thinking and
acting of the students, as well as frequent problems
of bullying
Clustering COVID-19 ARDS patients through the first days of ICU admission. An analysis of the CIBERESUCICOVID Cohort
Background Acute respiratory distress syndrome (ARDS) can be classified into sub-phenotypes according to different inflammatory/clinical status. Prognostic enrichment was achieved by grouping patients into hypoinflammatory or hyperinflammatory sub-phenotypes, even though the time of analysis may change the classification according to treatment response or disease evolution. We aimed to evaluate when patients can be clustered in more than 1 group, and how they may change the clustering of patients using data of baseline or day 3, and the prognosis of patients according to their evolution by changing or not the cluster.Methods Multicenter, observational prospective, and retrospective study of patients admitted due to ARDS related to COVID-19 infection in Spain. Patients were grouped according to a clustering mixed-type data algorithm (k-prototypes) using continuous and categorical readily available variables at baseline and day 3.Results Of 6205 patients, 3743 (60%) were included in the study. According to silhouette analysis, patients were grouped in two clusters. At baseline, 1402 (37%) patients were included in cluster 1 and 2341(63%) in cluster 2. On day 3, 1557(42%) patients were included in cluster 1 and 2086 (57%) in cluster 2. The patients included in cluster 2 were older and more frequently hypertensive and had a higher prevalence of shock, organ dysfunction, inflammatory biomarkers, and worst respiratory indexes at both time points. The 90-day mortality was higher in cluster 2 at both clustering processes (43.8% [n = 1025] versus 27.3% [n = 383] at baseline, and 49% [n = 1023] versus 20.6% [n = 321] on day 3). Four hundred and fifty-eight (33%) patients clustered in the first group were clustered in the second group on day 3. In contrast, 638 (27%) patients clustered in the second group were clustered in the first group on day 3.Conclusions During the first days, patients can be clustered into two groups and the process of clustering patients may change as they continue to evolve. This means that despite a vast majority of patients remaining in the same cluster, a minority reaching 33% of patients analyzed may be re-categorized into different clusters based on their progress. Such changes can significantly impact their prognosis
- …