Physicochemical characterisation of protein ingredients prepared from milk by ultrafiltration or microfiltration for application in formulated nutritional products

Formulated food systems are becoming more sophisticated as demand grows for the design of structural and nutritional profiles targeted at increasingly specific demographics. Milk protein is an important bio- and techno-functional component of such formulations, which include infant formula, sports supplements, clinical beverages and elderly nutrition products. This thesis outlines research into ingredients that are key to the development of these products, namely milk protein concentrate (MPC), milk protein isolate (MPI), micellar casein concentrate (MCC), β-casein concentrate (BCC) and serum protein concentrate (SPC). MPC powders ranging from 37 to 90% protein (solids basis) were studied for properties of relevance to handling and storage of powders, powder solubilisation and thermal processing of reconstituted MPCs. MPC powders with ≥80% protein were found to have very poor flowability and high compressibility; in addition, these high-protein MPCs exhibited poor wetting and dispersion characteristics during rehydration in water. Heat stability studies on unconcentrated (3.5%, 140°C) and concentrated (8.5%, 120°C) MPC suspensions, showed that suspensions prepared from high-protein MPCs coagulated much more rapidly than lower protein MPCs. β-casein ingredients were developed using membrane processing. Enrichment of β-casein from skim milk was performed at laboratory-scale using ‘cold’ microfiltration (MF) at <4°C with either 1000 kDa molecular weight cut-off or 0.1 µm pore-size membranes. At pilot-scale, a second ‘warm’ MF step at 26°C was incorporated for selective purification of micellised β-casein from whey proteins; using this approach, BCCs with β-casein purity of up to 80% (protein basis) were prepared, with the whey protein purity of the SPC co-product reaching ~90%. The BCC ingredient could prevent supersaturated solutions of calcium phosphate (CaP) from precipitating, although the amorphous CaP formed created large micelles that were less thermo-reversible than those in CaP-free systems. Another co-product of BCC manufacture, MCC powder, was shown to have superior rehydration characteristics compared to traditional MCCs. The findings presented in this thesis constitute a significant advance in the research of milk protein ingredients, in terms of optimising their preparation by membrane filtration, preventing their destabilisation during processing and facilitating their effective incorporation into nutritional formulations designed for consumers of a specific age, lifestyle or health statu

Short communication: Multi-component interactions causing solidification during industrial-scale manufacture of pre-crystallized acid whey powders

peer-reviewedAcid whey (AW) is the liquid co-product arising from acid-induced precipitation of casein from skim milk. Further processing of AW is often challenging due to its high mineral content, which can promote aggregation of whey proteins, which contributes to high viscosity of the liquid concentrate during subsequent lactose crystallization and drying steps. This study focuses on mineral precipitation, protein aggregation, and lactose crystallization in liquid AW concentrates (∼55% total solids), and on the microstructure of the final powders from 2 independent industrial-scale trials. These AW concentrates were observed to solidify either during processing or during storage (24 h) of pre-crystallized concentrate. The more rapid solidification in the former was associated with a greater extent of lactose crystallization and a higher ash-to-protein ratio in that concentrate. Confocal laser scanning microscopy analysis indicated the presence of a loose network of protein aggregates (≤10 µm) and lactose crystals (100–300 µm) distributed throughout the solidified AW concentrate. Mineral-based precipitate was also evident, using scanning electron microscopy, at the surface of AW powder particles, indicating the formation of insoluble calcium phosphate during processing. These results provide new information on the composition- and process-dependent physicochemical changes that are useful in designing and optimizing processes for AW

Pilot-scale ceramic membrane filtration of skim milk for the production of a 'humanised' protein base ingredient for infant milk formula

The protein composition of bovine skim milk was modified using pilot scale membrane filtration to produce a whey protein-dominant ingredient with a casein profile closer to human milk. Bovine skim milk was processed at low (8.9 °C) or high (50 °C) temperature using ceramic microfiltration (MF) membranes (0.1 μm mean pore diameter). The resulting permeate stream was concentrated using polyethersulfone ultrafiltration (UF) membranes (10 kDa cut-off). The protein profile of MF and UF retentate streams were determined using reversed phase-high performance liquid chromatography and polyacrylamide gel electrophoresis. Permeate from the cold MF process (8.9 °C) had a casein:whey protein ratio of ∼35:65 with no αS- or κ-casein present, compared with a casein:whey protein ratio of ∼10:90 at 50 °C. This study has demonstrated the application of cold membrane filtration (8.9 °C) at pilot scale to produce a dairy ingredient with a protein profile closer to that of human milk

Colloidal properties of protein complexes formed in β-casein concentrate solutions as influenced by heating and cooling in the presence of different solutes

Monomeric bovine β-casein self-associates into micelles under appropriate conditions of protein concentration, serum composition and temperature. The present study investigated self-association characteristics of a β-casein concentrate (BCC) prepared from milk at pilot-scale using membrane filtration. The BCC had a casein:whey protein ratio of 77:23, with ∼95% of casein consisting of β-casein, and the remainder being mostly κ-CN. BCC was reconstituted to 1.2% protein (a typical level in infant formula) in various liquid media at pH 6.8 and incubated at different temperatures from 4 to 63 °C for 30 min. Self-association of β-casein on heating was thermo-reversible in deionised water, lactose (4, 6 or 8%) or calcium (9 mM) solutions. In most serum phases, BCC became highly opaque after incubation at 63 °C, but clarified rapidly during cooling to 25 °C. However, in simulated milk ultrafiltrate (SMUF), which has a high ionic strength and is supersaturated in calcium phosphate (CaP), BCC remained opaque during cooling to 25 °C, and retained residual turbidity after 15 h of holding at 4 °C; if SMUF was prepared without phosphate then turbidity development in BCC solutions was markedly reduced. The complexes responsible for this turbidity development were successfully dissociated with 50 mM trisodium citrate. Analysis of pH during heating and holding at 60 °C indicated that SMUF acidified continuously under the period of study, while acidification in BCC/SMUF mixtures terminated after a short period, indicating that the type of CaP formed on heating is altered in the presence of BCC. This study demonstrates that BCC ingredients exhibit pronounced temperature-dependant changes in colloidal properties that are strongly affected by the presence of minerals commonly found in nutritional product formulations

Rehydration behaviour of spray-dried micellar casein concentrates produced using microfiltration of skim milk at cold or warm temperatures

peer-reviewedMicrofiltration (MF) of skim milk, when combined with diafiltration (DF), facilitates the manufacture of liquid micellar casein concentrate (MCC), which can be spray-dried into high-protein (≥80% protein, dry-basis) powders. MCC powders rehydrate slowly, which is typically considered a defect by end-users. This study compared the impact of cold (<10 °C) or warm (50 °C) MF/DF on the rehydration characteristics of MCC powders (MCCcold and MCCwarm, respectively). The wetting properties of the MCC powders, measured using optical tensiometry, were found to be equivalent. However, pronounced differences in dispersion characteristics were measured, and, after 90 min rehydration at 50 °C, liberated casein micelles accounted for only 7.5% of total particle volume in MCCwarm compared with 48% in MCCcold. Due to its superior dispersion characteristics, MCCcold yielded 50–60% less sediment during analytical centrifugation experiments. Cold MF/DF may improve the solubility of MCC powders by accelerating the release of casein micelles from powder particles during rehydration

Self-association of bovine β-casein as influenced by calcium chloride, buffer type and temperature

peer-reviewedThe aim of this study was to investigate the aggregation behaviour of a pure β-casein (β-CNpure) and a β-casein concentrate (β-CNconc) as a function of temperature, buffer type (pH 6.8) and the presence of CaCl2. The particle size distribution and turbidity of β-casein (β-CN) dispersions were measured by dynamic light-scattering (DLS) and UV/vis spectroscopy between 4 and 55 °C. Upon heating (4–55 °C), the particle size of both β-CN samples increased, indicating self-association via hydrophobic interactions. It was shown that the self-association of β-CN increased with increasing β-CN concentration and that β-CNpure self-associated at significantly lower concentration than β-CNconc. Both turbidity and particle size measurements showed that the β-CN samples had similar aggregation behaviour in water and imidazole buffer (pH 6.8) but differed in sodium phosphate buffer (pH 6.8), especially at higher ionic calcium concentrations. Fourier Transform Infrared (FTIR) spectroscopy revealed very little change in the secondary structure of β-CN during heating (4–55 °C). The microstructure of β-CN aggregates was monitored during heating from 10 to 55 °C, followed by cooling to 10 °C, using polarised light microscopy. Spherical and heterogeneous aggregates were observed when heated at temperatures above 37 °C, which were reversible upon cooling. This study confirmed that β-CN undergoes self-association on heating that reverses upon cooling, with the aggregation process being highly dependent on the purity of β-CN, the solvent type and the presence of ionic calcium

Rehydration Properties of Whey Protein Isolate Powders Containing Nanoparticulated Proteins

peer-reviewedThe rehydration properties of original whey protein isolate (WPIC) powder and spray-dried WPI prepared from either unheated (WPIUH) or nanoparticulated WPI solutions were investigated. Nanoparticulation of whey proteins was achieved by subjecting reconstituted WPIC solutions (10% protein, w/w, pH 7.0) to heat treatment at 90 °C for 30 s with no added calcium (WPIH) or with 2.5 mM added calcium (WPIHCa). Powder surface nanostructure and elemental composition were investigated using atomic force microscopy and X-ray photoelectron spectroscopy, followed by dynamic visualisation of wetting and dissolution characteristics using environmental scanning electron microscopy. The surface of powder particles for both WPIUH and WPIC samples generally appeared smooth, while WPIH and WPIHCa displayed micro-wrinkles with more significant deposition of nitrogen and calcium elements. WPIH and WPIHCa exhibited lower wettability and solubility performance than WPIUH and WPIC during microscopic observation. This study demonstrated that heat-induced aggregation of whey proteins, in the presence or absence of added calcium, before drying increases aggregate size, alters the powder surface properties, consequently impairing their wetting characteristics. This study also developed a fundamental understanding of WPI powder obtained from nanoparticulated whey proteins, which could be applied for the development of functional whey-based ingredients in food formulations, such as nanospacers to modulate protein–protein interactions in dairy concentrates.Food Institutional Research Measur

The Effect of Compositional Changes Due to Seasonal Variation on Milk Density and the Determination of Season-Based Density Conversion Factors for Use in the Dairy Industry

peer-reviewedThe objective of this study was to determine the effect of seasonal variation on milk composition and establish an algorithm to predict density based on milk composition to enable the calculation of season-based density conversion calculations. A total of 1035 raw whole milk samples were collected from morning and evening milking of 60 spring-calving individual cows of different genetic groups, namely Jersey, Elite HF (Holstein–Friesian) and National Average HF, once every two weeks for a period of 9 months (March–November, 2018). The average mean and standard deviation for milk compositional traits were 4.72 ± 1.30% fat, 3.85 ± 0.61% protein and 4.69 ± 0.30% lactose and density was estimated at 1.0308 ± 0.002 g/cm3 . The density of the milk samples was evaluated using three methods: a portable density meter, DMA 35; a standard desktop version, DMA 4500M; and an Association of Official Agricultural Chemists (AOAC) method using 100-mL glass pycnometers. Statistical analysis using a linear mixed model showed a significant difference in density of milk samples (p < 0.05) across seasonal and compositional variations adjusted for the effects of days in milk, parity, the feeding treatment, the genetic group and the measurement technique. The mean density values and standard error of mean estimated for milk samples in each season, i.e., spring, summer and autumn were 1.0304 ± 0.00008 g/cm3 , 1.0314 ± 0.00005 g/cm3 and 1.0309 ± 0.00007 g/cm3 , respectively.Enterprise Irelan