3,209 research outputs found
Design and optimization of hot-filling pasteurization conditions
Cupuacüu (Theobroma grandiflorum) is an Amazonian tropical fruit with a great
economic potential. Pasteurization, by a hot-filling technique, was suggested for the
preservation of this fruit pulp at room temperature. The process was implemented
with local communities in Brazil. The process was modeled, and a computer program
was written in Turbo Pascal. The relative importance among the pasteurization process
variables (initial product temperature, heating rate, holding temperature and time,
container volume and shape, cooling medium type and temperature) on the microbial
target and quality was investigated, by performing simulations according to a screening factorial design. Afterward, simulations of the different processing conditions were carried out. The holding temperature (TF) and time (thold) affected pasteurization value (P), and the container volume (V) influenced largely the quality parameters. The process was optimized for retail (1 L) and industrial (100 L) size containers, by maximizing volume average quality in terms of color lightness and sensory “fresh notes” and minimizing volume average total color difference and sensory “cooked notes”. Equivalent processes were designed and simulated (P91°C ) 4.6 min on Alicyclobacillus acidoterrestris spores) and final quality (color, flavor, and aroma attributes) was evaluated. Color was slightly affected by the pasteurization processes, and few differences were observed between the six equivalent treatments designed (TF between 80 and 97 °C). TF g 91 °C minimized “cooked notes” and maximized “fresh notes” of cupuacüu pulp aroma and flavor for 1 L container. Concerning the 100 L size, the “cooked
notes” development can be minimized with TF g 91 °C, but overall the quality was
greatly degraded as a result of the long cooling times. A more efficient method to speed up the cooling phase was recommended, especially for the industrial size of containers
Development of an innovative macroalgae biorefinery: Oligosaccharides as pivotal compounds
ABSTRACT: Macroalgae have significant advantages over land-living biomass resources and are promising pivotal feedstocks for the onset of the blue bioeconomy. Among these, Ulva lactuca has demonstrated a high potential due to its wide distribution and high productivity. In this work, a detailed chemical characterization of U. lactuca enabled the identification of polysaccharides as the main macromolecular component of the organic fraction. They present a high diversity of sugar constituents and hence can be a relevant source of added-value oligosaccharides for the food/feed industries. Four processes, with increasing operational temperatures, were compared for the selective production of oligosaccharides: Conventional Soxhlet Extraction, Accelerated Solvent Extraction, Hydrothermal treatment (HT) and Dilute Acid Hydrolysis (DAH). All processes presented high oligosaccharide/monosaccharide ratios, with HT and DAH exhibiting the highest oligosaccharides yields (10.6 and 16.6 g/100 g initial biomass, respectively). These oligosaccharides were obtained under milder, more economic conditions than the reported for lignocellulosic (land) plants and can represent an important added-value income of the algae biorefineries and thus contribute to their economic sustainability.info:eu-repo/semantics/publishedVersio
Selective albumin-binding surfaces modified with a thrombin-inhibiting peptide
Blood-contacting medical devices have been associated with severe clinical complications, such as thrombus formation, triggered by the activation of the coagulation cascade due to the adsorption of certain plasma proteins on the surface of biomaterials. Hence, the coating of such surfaces with antithrombotic agents has been used to increase biomaterial haemocompatibility. Biomaterial-induced clotting may also be decreased by albumin adsorption from blood plasma in a selective and reversible way, since this protein is not involved in the coagulation cascade. In this context, this paper reports that the immobilization of the thrombin inhibitor D-Phe-Pro-D-Arg-D-Thr-CONH2 (fPrt) onto nanostructured surfaces induces selective and reversible adsorption of albumin, delaying the clotting time when compared to peptide-free surfaces. fPrt, synthesized with two glycine residues attached to the N-terminus (GGfPrt), was covalently immobilized onto self-assembled monolayers (SAMs) having different ratios of carboxylate-hexa(ethylene glycol)- and tri(ethylene glycol)-terminated thiols (EG6-COOH/EG3) that were specifically designed to control GGfPrt orientation, exposure and density at the molecular level. In solution, GGfPrt was able to inactivate the enzymatic activity of thrombin and to delay plasma clotting time in a concentration-dependent way. After surface immobilization, and independently of its concentration, GGfPrt lost its selectivity to thrombin and its capacity to inhibit thrombin enzymatic activity against the chromogenic substrate n-p-tosyl-Gly-Pro-Arg-p-nitroanilide. Nevertheless, surfaces with low concentrations of GGfPrt could delay the capacity of adsorbed thrombin to cleave fibrinogen. In contrast, GGfPrt immobilized in high concentrations was found to induce the procoagulant activity of the adsorbed thrombin. However, all surfaces containing GGfPrt have a plasma clotting time similar to the negative control (empty polystyrene wells), showing resistance to coagulation, which is explained by its capacity to adsorb albumin in a selective and reversible way. This work opens new perspectives to the improvement of the haemocompatibility of blood-contacting medical devices
Antimicrobial properties of membrane-active dodecapeptides derived from MSI-78
Antimicrobial peptides (AMPs) are a class of broad-spectrum antibiotics known by their ability to disrupt bacterial membranes and their low tendency to induce bacterial resistance, arising as excellent candidates to fight bacterial infections. In this study we aimed at designing short 12-mer AMPs, derived from a highly effective and broad spectrum synthetic AMP, MSI-78 (22 residues), by truncating this peptide at the N- and/or C-termini while spanning its entire sequence with 1 amino add (aa) shifts. These designed peptides were evaluated regarding antimicrobial activity against selected gram-positive Staphylococcus strains and the gram-negative Pseudomonas aeruginosa (P. aeruginosa). The short 12-mer peptide CEM1 (GIGMFLKKAKICF) was identified as an excellent candidate to fight P. aeruginosa infections as it displays antimicrobial activity against this strain and selectivity, with negligible toxicity to mammalian cells even at high concentrations. However, in general most of the short 12-mer peptides tested showed a reduction in antimicrobial activity, an effect that was more pronounced for gram-positive Staphylococcus strains. Interestingly, CEM1 and a highly similar peptide differing by only one aa-shift (CEM2: IGKFLKKAKICFG), showed a remarkably contrasting AMP activity. These two peptides were chosen for a more detailed study regarding their mechanism of action, using several biophysical assays and simple membrane models that mimic the mammalian and bacterial lipid composition. We confirmed the correlation between peptide helicity and antimicrobial activity and propose a mechanism of action based on the disruption of the bacterial membrane permeability barrier
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
hLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy
Covalent immobilization of antimicrobial peptides (AMPs) onto biomaterial surfaces
Bacterial adhesion to biomaterials remains a major problem in the medical devices field. Antimicrobial peptides (AMPS) are well-known components of the innate immune system that can be applied to over-come biofilm-associated infections. Their relevance has been increasing as a practical alternative to conventional antibiotics, which are declining in effectiveness. The recent interest focused on these peptides can be explained by a group of special features, including a wide spectrum of activity, high efficacy at very low concentrations, target specificity, anti-endotoxin activity, synergistic action with classical antibiotics, and low propensity for developing resistance. Therefore, the development of an antimicrobial coating with such properties would be worthwhile. The immobilization of AMPS onto a biomaterial surface has further advantages as it also helps to circumvent AMPs' potential limitations, such as short half-life and cytotoxicity associated with higher concentrations of soluble peptides. The studies discussed in the current review report on the impact of covalent immobilization of AMPs onto surfaces through different chemical coupling strategies, length of spacers, and peptide orientation and concentration. The overall results suggest that immobilized AMPs may be effective in the prevention of biofilm formation by reduction of microorganism survival post-contact with the coated biomaterial. Minimal cytotoxicity and long-term stability profiles were obtained by optimizing immobilization parameters, indicating a promising potential for the use of immobilized AMPs in clinical applications. On the other hand, the effects of tethering on mechanisms of action of AMPs have not yet been fully elucidated. Therefore, further studies are recommended to explore the real potential of immobilized AMPs in health applications as antimicrobial coatings of medical devices
Dhvar5 antimicrobial peptide (AMP) chemoselective covalent immobilization results on higher antiadherence effect than simple physical adsorption
Bacterial colonization and subsequent biofilm formation is still one of the major problems associated with medical devices. Antimicrobial peptides (AMP) immobilization onto biomaterials surface is a promising strategy to avoid bacterial colonization. However, a correct peptide orientation and exposure from the surface is essential to maintain AMP antimicrobial activity. This work aims to evaluate the effect of the immobilization on antibacterial activity of Dhvar5 (LLLFLLKKRKKRKY), an AMP with a head-to-tail amphipathicity. Dhvar5 was linked to thin chitosan coatings in i) a controlled orientation and exposure, testing covalent immobilization of its N- or C-terminus and using spacers with different lengths and flexibilities or in ii) a random orientation by physical adsorption. Chitosan coating was chosen due to its antimicrobial properties and readiness to be functionalized. Surface characterization demonstrated the chemoselective immobilization of the peptide with different spacers in a similar concentration (similar to 2 ng/cm(2)). Efficacy assays demonstrated that covalent immobilization of Dhvar5 exposing its cationic end, improves the chitosan coating antimicrobial effect by decreasing Methicillin-resistant Staphylococcus aureus (MRSA) colonization. This effect was enhanced when longer spacers were used independently of their flexibility. In opposite, immobilized Dhvar5 exposing its hydrophobic end has no effect on bacterial adhesion to chitosan, and when adsorbed in a random orientation even induces bacterial adhesion to chitosan coating
Labdanum Resin from Cistus ladanifer L.: A Natural and Sustainable Ingredient for Skin Care Cosmetics with Relevant Cosmeceutical Bioactivities
Labdanum resin from Cistus ladanifer L. (Cistaceae) is an abundant natural resource in the Iberian Peninsula worth being explored in a sustainable manner. It is already used in the cosmetic industry; mainly by the fragrances/perfumery sector. However, given the highest market share and traditional uses, labdanum resin also has the potential to be used and valued as a cosmetic ingredient for skincare. Aiming to evaluate this potential, labdanum methanolic absolute and fractions purified by column chromatography were characterized by UPLC-DAD-ESI-MS and then evaluated for UV-protection, antioxidant, anti-elastase, anti-inflammatory, and antimicrobial activities. Labdanum absolute represented ~70% of the resin; diterpenoid and flavonoid fractions represented ~75% and 15% of the absolute, respectively. Labdane-type diterpenoids and methylated flavonoids were the main compounds in labdanum absolute and in diterpenoid and flavonoid fractions, respectively. Labdanum absolute showed a spectrophotometric sun protection factor (SPF) near 5, which is mainly due to flavonoids, as the flavonoids’ SPF was 13. Low antioxidant activity was observed, with ABTS radical scavenging being the most significant (0.142 ± 0.017, 0.379 ± 0.039 and 0.010 ± 0.003 mgTE/mgExt, for the absolute and flavonoid and terpene fractions, respectively). Anti-aging and anti-inflammatory activity are reported here for the first time, by the inhibition of elastase activity (22% and 13%, by absolute and flavonoid extract at 1 mg/mL), and by the inhibition of nitric oxide production in LPS-induced RAW 264.7 cells (84% to 98%, at 15 µg/mL extracts, flavonoid fraction the most active), respectively. Antimicrobial activity, against relevant skin and cosmetic product microorganisms, Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, and Escherichia coli, revealed that only S. aureus was susceptible to labdanum absolute (MIC: 1.2 mg/mL) and its fractions (MIC: <0.3 mg/mL). In conclusion, labdanum resin showed potential to be used in sunscreen cosmetics, anti-inflammatory skincare cosmeceuticals or medicines but has low potential as a cosmetic product preservative given the low antioxidant and low-spectrum antimicrobial activities
The MOVE.TE Falls Prevention and Management Program: lessons learnt in the Portuguese context
MOVE.TE is a non-profit participatory physiotherapy platform that aims at translating knowledge in the field of physiotherapy and developing freely available evidence-based physiotherapy programmes targeting the primary care services of the Portuguese National Health service. A group of volunteer academics and clinicians collaborated at different stages and time points to create the first ever falls prevention and management programme and guidance for Physiotherapy in primary care, in Portugal. This report describes this seven-step process. In spite of many challenges, this project constitutes an example of advocacy in physiotherapy for the promotion of better healthcare for older adults.info:eu-repo/semantics/publishedVersio
A 17-mer Membrane-Active MSI-78 Derivative with Improved Selectivity toward Bacterial Cells
Antimicrobial peptides are widely recognized as an excellent alternative to conventional antibiotics. MSI-78, a highly effective and broad spectrum AMP, is one of the most promising AMPs for clinical application. In this study, we have designed shorter derivatives of MSI-78 with the aim of improving selectivity while maintaining antimicrobial activity. Shorter 17-mer derivatives were created by truncating MSI-78 at the N- and/or C-termini, while spanning MSI-78 sequence. Despite the truncations made, we found a 17-mer peptide, MSI-78(4-20) (KFLKKAKKFGKAFVKIL), which was demonstrated to be as effective as MSI-78 against the Gram-positive Staphylococcus strains tested and the Gram-negative Pseudomonas aeruginosa. This shorter derivative is more selective toward bacterial cells as it was less toxic to erythrocytes than MSI-78, representing an improved version of the lead peptide. Biophysical studies support a mechanism of action for MSI-78(4-20) based on the disruption of the bacterial membrane permeability barrier, which in turn leads to loss of membrane integrity and ultimately to cell death. These features point to a mechanism of action similar to the one described for the lead peptide MSI-78
- …