7,726 research outputs found
Optimal mistuning for enhanced aeroelastic stability of transonic fans
An inverse design procedure was developed for the design of a mistuned rotor. The design requirements are that the stability margin of the eigenvalues of the aeroelastic system be greater than or equal to some minimum stability margin, and that the mass added to each blade be positive. The objective was to achieve these requirements with a minimal amount of mistuning. Hence, the problem was posed as a constrained optimization problem. The constrained minimization problem was solved by the technique of mathematical programming via augmented Lagrangians. The unconstrained minimization phase of this technique was solved by the variable metric method. The bladed disk was modelled as being composed of a rigid disk mounted on a rigid shaft. Each of the blades were modelled with a single tosional degree of freedom
A linearized Euler analysis of unsteady flows in turbomachinery
A method for calculating unsteady flows in cascades is presented. The model, which is based on the linearized unsteady Euler equations, accounts for blade loading shock motion, wake motion, and blade geometry. The mean flow through the cascade is determined by solving the full nonlinear Euler equations. Assuming the unsteadiness in the flow is small, then the Euler equations are linearized about the mean flow to obtain a set of linear variable coefficient equations which describe the small amplitude, harmonic motion of the flow. These equations are discretized on a computational grid via a finite volume operator and solved directly subject to an appropriate set of linearized boundary conditions. The steady flow, which is calculated prior to the unsteady flow, is found via a Newton iteration procedure. An important feature of the analysis is the use of shock fitting to model steady and unsteady shocks. Use of the Euler equations with the unsteady Rankine-Hugoniot shock jump conditions correctly models the generation of steady and unsteady entropy and vorticity at shocks. In particular, the low frequency shock displacement is correctly predicted. Results of this method are presented for a variety of test cases. Predicted unsteady transonic flows in channels are compared to full nonlinear Euler solutions obtained using time-accurate, time-marching methods. The agreement between the two methods is excellent for small to moderate levels of flow unsteadiness. The method is also used to predict unsteady flows in cascades due to blade motion (flutter problem) and incoming disturbances (gust response problem)
Dynamic dialogue: a multi-perspective approach towards cultural competence
Interculturalism and race relations are becoming more complex as America becomes more diverse. Recent attention focused on universitiesā admissions programs aimed at diversifying the student body only convey a segment of campus efforts addressing diversity. Curriculum development initiatives speak to diversity concerns through course topics centered on issues such as race and gender by stimulating conversations among students and the instructor. This article presents two models for integrating dynamic dialogues/conversations about race across academic curricula. These perspectives shed insight into the challenges of communicating in an intercultural environment. One model highlights attempts at integrating dynamic dialogue programmatically and the other approaches dynamic dialogue pedagogically, through instructor training. We use Banksā (2007) approach to multicultural curriculum reform to examine the pedagogic and curricular transformations for each institution
The middeck 0-gravity dynamics experiment
The Middeck 0-Gravity Dynamics Experiment (MODE), flown onboard the Shuttle STS-48 Mission, consists of three major elements: the Experiment Support Module, a dynamics test bed providing computer experiment control, analog signal conditioning, power conditioning, an operator interface consisting of a keypad and display, experiment electrical and thermal control, and archival data storage: the Fluid Test Article assembly, used to investigate the dynamics of fluid-structure interaction in 0-gravity; and the Structural Test Article for investigating the open-loop dynamics of structures in 0-gravity. Deployable, erectable, and rotary modules were assembled to form three one- and two-dimensional structures, in which variations in bracing wire and rotary joint preload could be introduced. Change in linear modal parameters as well as the change in nonlinear nature of the response is examined. Trends in modal parameters are presented as a function of force amplitude, joint preload, and ambient gravity. An experimental study of the lateral slosh behavior of contained fluids is also presented. A comparison of the measured earth and space results identifies and highlights the effects of gravity on the linear and nonlinear slosh behavior of these fluids
Studies on the movements, population dynamics and food of Apodemus Sylvaticus (L.) and Clethrionomys Glareolus schr
Not availabl
Letter to Philander Chase
Crawley invites Chase to a family dinner.https://digital.kenyon.edu/chase_letters/1995/thumbnail.jp
Design and development of a deployable self-inflating adaptive membrane
Space structures nowadays are often designed to serve just one objective during their mission life, examples include truss structures that are used as support structures, solar sails for propulsion or antennas for communication. Each and every single one of these structures is optimized to serve just their distinct purpose and are more or less useless for the rest of the mission and therefore dead weight. By developing a smart structure that can change its shape and therefore adapt to different mission requirements in a single structure, the flexibility of the spacecraft can be increased by greatly decreasing the mass of the entire system. This paper will introduce such an adaptive structure called the Self-inflating Adaptive Membrane (SAM) concept which is being developed at the Advanced Space Concepts Laboratory of the University of Strathclyde. An idea presented in this paper is to adapt these basic changeable elements from natureās heliotropism. Heliotropism describes a movement of a plant towards the sun during a day; the movement is initiated by turgor pressure change between adjacent cells. The shape change of the global structure can be significant by adding up these local changes induced by local elements, for example the cellās length. To imitate the turgor pressure change between the motor cells in plants to space structures, piezoelectric micro pumps are added between two neighboring cells. A passive inflation technique is used for deploying the membrane at its destination in space. The trapped air in the spheres will inflate the spheres when subjected to vacuum, therefore no pump or secondary active deployment methods are needed. The paper will present the idea behind the adaption of natureās heliotropism principle to space structures. The feasibility of the residual air inflation method is verified by LS-DYNA simulations and prototype bench tests under vacuum conditions. Additionally, manufacturing techniques and folding patterns are presented to optimize the actual bench test structure and to minimize the required storage volume. It is shown that through a bio-inspired concept, a high ratio of adaptability of the membrane can be obtained. The paper concludes with the design of a technology demonstrator for a sounding rocket experiment to be launched in March 2013 from the Swedish launch side Esrange
Priority sectors in city regions? Some issues from a study of the Cardiff Capital Region
The City Region is becoming the spatial focus for economic development policy across many parts of the European continent. But these functional regions have taken on a new impetus in the UK with the introduction of ācity dealsā aimed at improving network and coordination of actors in local authorities. One of the goals of city regions is to improve industrial policy particularly lacking since the abolition of many of the Regional Development Agencies across the UK. However, city regions in developing policy appear to be following in an unquestioning manner the industrial priorities of earlier institutions, and nowhere is this more obvious than in the case of the identification of priority industry development sectors. Too often the selection of industries and clusters for special support has been undertaken in an unquestioning manner. In this paper we focus on the case of the Cardiff Capital Region. We review approaches to identify priority sectors in this case and the problems associated with this policy approach
- ā¦