Benchmarking of a 1D Scrape-off layer code SOLF1D with SOLPS and its use in modelling long-legged divertors

A 1D code modelling SOL transport parallel to the magnetic field (SOLF1D) is benchmarked with 2D simulations of MAST-U SOL performed via the SOLPS code for two different collisionalities. Based on this comparison, SOLF1D is then used to model the effects of divertor leg stretching in 1D, in support of the planned Super-X divertor on MAST. The aim is to separate magnetic flux expansion from volumetric power losses due to recycling neutrals by stretching the divertor leg either vertically or radially.Comment: 31 pages, 17 figures. This is an author-created, un-copyedited version of an article accepted for publication in Plasma Physics and Controlled Fusion. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from i

Fear of exercise and health-related quality of life in patients with an implantable cardioverter defibrillator

Several studies have reported improved survival rates thanks to the use of an implantable cardioverter defibrillator (ICD) in the treatment of patients with life-threatening arrhythmia. However, the effects of the ICD on health-related quality of life (HR-QoL) of these patients are not clear. The aim of this study is to describe HR-QoL and fear of exercise in ICD patients. Eighty-nine ICD patients from the University Hospital in Groningen, the Netherlands, participated in this study. HR-QoL was measured using the Rand-36 and the Quality of Life After Myocardial Infarction Dutch language version questionnaires. Fear of exercise was measured using the Tampa Scale for Kinesiophobia, Dutch version and the Fear Avoidance Beliefs Questionnaire, Dutch version. Association between outcome variables was analysed by linear regression analyses. Study results show that the HR-QoL of patients with ICDs in our study population is significantly worse than that of normal healthy people. Furthermore, fear of exercise is negatively associated with HR-QoL corrected for sex, age and number of years living with an ICD. After implantation of the ICD, patients with a clear fear of exercise should be identified and interventions should be considered in order to increase their HR-QoL

Human Performance Modelling for Adaptive Automation

The relentless march of technology is increasingly opening new possibilities for the application of automation and new horizons for human machine interaction. However there is insufficient scientific evidence on human factors for modern socio-technical systems supporting the guidelines currently used to design Human Machine Interfaces (HMI) (ISA 2014). This dearth of knowledge presents a particular risk in safety critical industries. The continuing 60–90% of accidents currently that are rooted in Human Factors (HF) and the rapid developments in the Internet of Things (IoT) and its novel automation archetypes means that the requirements for new interfaces are becoming more demanding, and creating new failure modes. To address this gap it is necessary to face the issue of modelling the human factor element and be ready to incorporate that knowledge into the design of adaptive automation

Use of high-dimensional spectral data to evaluate organic matter, reflectance relationships in soils

Recent breakthroughs in remote sensing technology have led to the development of a spaceborne high spectral resolution imaging sensor, HIRIS, to be launched in the mid-1990s for observation of earth surface features. The effects of organic carbon content on soil reflectance over the spectral range of HIRIS, and to examine the contributions of humic and fulvic acid fractions to soil reflectance was evaluated. Organic matter from four Indiana agricultural soils was extracted, fractionated, and purified, and six individual components of each soil were isolated and prepared for spectral analysis. The four soils, ranging in organic carbon content from 0.99 percent, represented various combinations of genetic parameters such as parent material, age, drainage, and native vegetation. An experimental procedure was developed to measure reflectance of very small soil and organic component samples in the laboratory, simulating the spectral coverage and resolution of the HIRIS sensor. Reflectance in 210 narrow (10 nm) bands was measured using the CARY 17D spectrophotometer over the 400 to 2500 nm wavelength range. Reflectance data were analyzed statistically to determine the regions of the reflective spectrum which provided useful information about soil organic matter content and composition. Wavebands providing significant information about soil organic carbon content were located in all three major regions of the reflective spectrum: visible, near infrared, and middle infrared. The purified humic acid fractions of the four soils were separable in six bands in the 1600 to 2400 nm range, suggesting that longwave middle infrared reflectance may be useful as a non-destructive laboratory technique for humic acid characterization

A field experience of mass percutaneous BCG inoculation as an immunizing and diagnostic procedure: Follow-up phase

No Abstract

A field experience of mass percutaneous BCG inoculation as an immunizing and diagnostic procedure

No Abstract

Low-voltage Ge avalanche photodetector for highly sensitive 10Gb/s Si photonic receivers

We demonstrate low-voltage germanium waveguide avalanche photodetectors (APD) with gain-bandwidth product of 88GHz. A 7.1dB sensitivity improvement is demonstrated for an APD wire-bonded to a 10Gb/s CMOS transimpedance amplifier, at -6.2V APD bias

Improved measurements of ICRF antenna input impedance at ASDEX upgrade during ICRF coupling studies

A new set of diagnostics has been implemented on ASDEX Upgrade to measure the input impedance of the ICRF antennas, in the form of a voltage and current probe pair installed on each feeding line of every antenna. Besides allowing the measurement of the reflection coefficient Gamma of each antenna port, the probes have two advantages: first, they are located close to the antenna ports (similar to 3 m) and thus the measurements are not affected by the uncertainties due to the transmission and matching network; second, they are independent of matching conditions. These diagnostics have been used to study the behavior of the ASDEX Upgrade antennas while changing the plasma shape (low to high triangularity) and applying magnetic perturbations (MPs) via saddle coils. Scans in the separatrix position R-sep were also performed. Upper triangularity delta(o) was increased from 0.1 to 0.3 (with the lower triangularity delta(o) kept roughly constant at 0.45) and significant decreases in vertical bar Gamma vertical bar (up to similar to 30%, markedly improving antenna coupling) and moderate changes in phase (up to similar to 5 degrees) off on each feeding line were observed approximately at delta(o) >= 0.29. During MPs (in similar to 0.5 s pulses with a coil current of 1 kA), a smaller response was observed: 6% - 7% in vertical bar Gamma vertical bar, with changes in phase of 5 apparently due to R p scans only. As 1 is usually in the range 0.8 - 0.9, this still leads to a significant increase in possible coupled power. Numerical simulations of the antenna behavior were carried out using the FELICE code; the simulation results are in qualitative agreement with experimental measurements. The results presented here complement the studies on the influence of gas injection and MPs on the ICRF antenna performance presented in [4]