On the effect of aluminum on the microstructure and mechanical properties of CrN coatings deposited by HiPIMS

BNDES - BANCO NACIONAL DE DESENVOLVIMENTO ECONÔMICO E SOCIALCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOHard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation produce coatings with many defects, which in turn reduce the resistance to wear, especially under severe conditions. High Power Impulse Magnetron Sputtering is a novel physical vapor deposition technique that produces homogeneous coatings. In this study, CrN and CrAlN monolayer coatings were deposited on AISI 304 stainless steel substrates using HiPIMS. X-Ray Diffraction, Scanning Electron Microscopy, Atomic Force Microscopy were used to evaluate the microstructure, phase composition, morphology and chemical composition of the coating. Results showed that HiPIMS is a promising technique to deposit CrN and CrAlN homogeneous coatings with high hardness and good adhesion to the substrate.21316BNDES - BANCO NACIONAL DE DESENVOLVIMENTO ECONÔMICO E SOCIALCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOBNDES - BANCO NACIONAL DE DESENVOLVIMENTO ECONÔMICO E SOCIALCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO640/2012sem informaçãosem informaçã

Self-sterilizing ormosils surfaces based on photo-synzthesized silver nanoparticles

Medical device-related infections represent a major healthcare complication, resulting in potential risksfor the patient. Antimicrobial materials comprise an attractive strategy against bacterial colonizationand biofilm proliferation. However, in most cases these materials are only bacteriostatic or bactericidal,and consequently they must be used in combination with other antimicrobials in order to reach theeradication condition (no viable microorganisms). In this study, a straightforward and robust antibac-terial coating based on Phosphotungstate Ormosil doped with core-shell (SiO2@TiO2) was developedusing sol-gel process, chemical tempering, and Ag nanoparticle photoassisted synthesis (POrs-CS-Ag).The coating was characterized by X-ray Fluorescence Spectroscopy (XRF), Field Emission ScanningElectron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and X-ray Photoelectron Microscopy(XPS). The silver free coating displays low antibacterial activity against Staphylococcus aureus and Pseu-domonas aeruginosa, in opposition to the silver loaded ones, which are able to completely eradicate thesestrains. Moreover, the antimicrobial activity of these substrates remains high until three reutilizationcycles, which make them a promising strategy to develop self-sterilizing materials, such as POrs-CS-Ag-impregnated fabric, POrs-CS-Ag coated indwelling metals and polymers, among other materials.Fil: Gonçalves, Lidiane Patrícia. Universidade de Sao Paulo; BrasilFil: Miñan, Alejandro Guillermo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Benítez, Guillermo Ignacio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Fernandez Lorenzo, Monica Alicia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Vela, Maria Elena. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Schilardi, Patricia Laura. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Ferreira Neto, Elias Paiva. Universidade de Sao Paulo; BrasilFil: Noveletto, Júlia Cristina. Universidade de Sao Paulo; BrasilFil: Correr, Wagner Rafael. Universidade de Sao Paulo; BrasilFil: Rodrigues Filho, Ubirajara Pereira. Universidade de Sao Paulo; Brasi

Fluorescence spectroscopy for the detection of potentially malignant disorders of the oral cavity: analysis of 30 cases

Oral cancer is a major health problem worldwide and although early diagnosis of potentially malignant and malignant diseases is associated with better treatment results, a large number of cancers are initially misdiagnosed, with unfortunate consequences for long-term survival. Fluorescence spectroscopy is a noninvasive modality of diagnostic approach using induced fluorescence emission in tumors that can improve diagnostic accuracy. The objective of this study was to determine the ability to discriminate between normal oral mucosa and potentially malignant disorders by fluorescence spectroscopy. Fluorescence investigation under 408 and 532 nm excitation wavelengths was performed on 60 subjects, 30 with potentially malignant disorders and 30 volunteers with normal mucosa. Data was analyzed to correlate fluorescence patterns with clinical and histopathological diagnostics. Fluorescence spectroscopy used as a point measurement technique resulted in a great variety of spectral information. In a qualitative analysis of the fluorescence spectral characteristics of each type of injury evaluated, it was possible to discriminate between normal and abnormal oral mucosa. The results show the potential use of fluorescence spectroscopy for an improved discrimination of oral disorders.FAPESP/CePOF-CEPID (07/57126-5)CNPq (477439/2007-1)Instituto Nacional de Ciência e Tecnologia em Oncogenômica (INCITO

Desenvolvimento de um sensor de DNA impedimétrico para o diagnóstico de infecção por Papilomavirus Humano tipo 18

Currently, the most common strategy employed to detect DNA sequences is PCR (Polymerase Chain Reaction). Nevertheless, in the last few years research on DNA biosensors has increased significantly. Such sensors represent an alternative to PCR in the detection of specific DNA sequences, once they exhibit fast response, low limits of detection, and require simpler sample preparation. The development of a biosensor for detection of DNA from Human Papillomavirus type 18 is reported. To immobilise DNA probe onto indium-tin oxide (ITO) electrodes, a silanisation was carried out using 3-Aminopropyltryethoxysilane (APTES). Silanisation was studied and optimised using ultra-violet absorption spectroscopy, atomic force microscopy, fluorescence microscopy, and cyclic voltammetry. After immobilisation, the hybridisation with target sequence is detected by changes in surface properties of ITO electrode by Cyclic Voltammetry and Electrochemical Impedance Spectroscopy, using the Ferri-Ferrocyante redox couple. The detection of synthetic target sequence was performed in the range of 12.5 to 100 nM, and 300nM for PCR products. The sensor did not show significative response for non-complementary sequence at 50 nM. This sensor can be applied for fast and low cost detection of HPV genetic material at nanomolar levels.A estratégia mais empregada atualmente na detecção de sequência de DNA é a PCR (Reação em Cadeira da Polimerase). Contudo, nos últimos anos, a pesquisa em biossensores de DNA tem aumentado significativamente. Estes sensores representam uma alternativa a PCR na detecção de sequências específicas de DNA, uma vez que exibem resposta rápida, baixos limites de detecção e requerem preparação simples da amostra. Nesta dissertação descrito o desenvolvimento de um biossensor para a detecção do DNA do Papilomavirus Humano tipo 18. A fim de imobilizar a sequência de captura de DNA em eletrodos de óxido de estanho e índio (ITO), realizou-se uma silanização usando 3-Aminopropiltrietoxisilano (APTES). A reação de silanização foi estudada e otimizada através das técnicas de Espectroscopia de Absorção Ultravioleta, Microscopia de Força Atômica, Microscopia de Fluorescência e Voltametria Cíclica. Após a imobilização, a hibridização com a sequência alvo é detectada através de alterações nas propriedades de superfície do eletrodo através de Voltametria Cíclica e Espectroscopia de Impedância Eletroquímica, usando o par redox Ferri-ferrocianeto. A detecção da sequência alvo sintética foi realizada no intervalo de 12.5 a 100 nM, e para o produto de PCR, 300 nM. O sensor não demonstrou resposta significativa para sequência não complementar a 50 nM. Este sensor pode ser aplicado na detecção rápida e de baixo custo de material genético do HPV a níveis nanomolares

Analysis Of Surgical Margins In Oral Cancer Using In Situ Fluorescence Spectroscopy.

Oral cancer is a public health problem with high prevalence in the population. Local tumor control is best achieved by complete surgical resection with adequate margins. A disease-free surgical margin correlates with a lower rate of local recurrence and a higher rate of disease-free survival. Fluorescence spectroscopy is a noninvasive diagnostic tool that can aid in real-time cancer detection. The technique, which evaluates the biochemical composition and structure of tissue fluorescence, is relatively simple, fast and, accurate. This study aimed to compare oral squamous cell carcinoma lesions to surgical margins and the mucosa of healthy volunteers by fluorescence spectroscopy. The sample consisted of 56 individuals, 28 with oral squamous cell carcinoma and 28 healthy volunteers with normal oral mucosa. Thirty six cases (64.3%) were male and the mean age was 60.9 years old. The spectra were classified and compared to histopathology to determine fluorescence efficiency for diagnostic discrimination of tumors. In the analysis of the other cases we observed discrimination between normal mucosa, injury and margins. At two-year follow up, three individuals had local recurrence, and in two cases investigation fluorescence in the corresponding area showed qualitative differences in spectra between the recurrence area and the area without recurrence at the same anatomical site in the same patient. In situ analysis of oral mucosa showed the potential of fluorescence spectroscopy as a diagnostic tool that can aid in discrimination of altered mucosa and normal mucosa.50593-

Fluorescence spectroscopy for the detection of potentially malignant disorders and squamous cell carcinoma of the oral cavity

Oral cancer is a public health problem with relevant incidence in the world population. The affected patient usually presents advanced stage disease and the consequence of this delay is a reduction in survival rates. Given this, it is essential to detect oral cancer at early stages. Fluorescence spectroscopy is a non-invasive diagnostic tool that can improve cancer detection in real time. It is a fast and accurate technique, relatively simple, which evaluates the biochemical composition and structure using the tissue fluorescence spectrum as interrogation data. Several studies have positive data regarding the tools for differentiating between normal mucosa and cancer, but the difference between cancer and potentially malignant disorders is not clear. The aim of this study was to evaluate the efficacy of fluorescence spectroscopy in the discrimination of normal oral mucosa, oral cancer, and potentially malignant disorders. The fluorescence spectroscopy was evaluated in 115 individuals, of whom 55 patients presented oral squamous cell carcinoma, 30 volunteers showing normal oral mucosa, and 30 patients having potentially malignant disorders. The spectra were classified and compared to histopathology to evaluate the efficiency in diagnostic discrimination employing fluorescence. In order to classify the spectra, a decision tree algorithm (C4.5) was applied. Despite of the high variance observed in spectral data, the specificity and sensitivity obtained were 93.8% and 88.5%, respectively at 406 nm excitation. These results point to the potential use of fluorescence spectroscopy as an important tool for oral cancer diagnosis and potentially malignant disorders1128290CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP477439/2007-198/14270-8; 07/57126-5; 09/12938-8; 2008/57887-

Fluorescence spectroscopy as a tool to detect and evaluate glucocorticoid-induced skin atrophy

Topical glucocorticoid (GC) therapy has been successfully used in the treatment of several common cutaneous diseases in clinical practice for a long time, and skin atrophy is one of the most typical cutaneous side effects of this therapy. The aim of this study was to evaluate the potential of noninvasive fluorescence spectroscopy (FS) technique in the detection and classification of GC-induced skin atrophy. A total of 20 male Wistar rats were used in the experimental protocol under controlled environmental conditions and with free access to food. One group received topical application of clobetasol propionate 0.05% for 14 days to induce cutaneous atrophy (atrophic group) and the other (control) group received only vehicle application following the same protocol and schedule. Histological analyses and FS measurements with laser excitation at both 532 nm and 408 nm were obtained on days 1 and 15. The FS results were classified as "normal" or "atrophic" according by histological analysis. Fluorescence spectra obtained with excitation at 408 nm allowed a clear distinction between the control and atrophic groups, and were more informative than the those obtained at 532 nm. Our results reveal that, if correctly applied, FS allows noninvasive evaluation of corticosteroid-induced skin atrophy, and thus represents an important step towards better monitoring of undesirable side effects of cutaneous therapy.CAPES (Brazilian Coordination for the Improvement of Higher Education PersonnelCAPES (Brazilian Coordination for the Improvement of Higher Education Personnelprogram NANOBIOTEC) [23038.027482/2009-60]program NANOBIOTEC

On the Effect of Aluminum on the Microstructure and Mechanical Properties of CrN Coatings deposited by HiPIMS

<div><p>Hard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation produce coatings with many defects, which in turn reduce the resistance to wear, especially under severe conditions. High Power Impulse Magnetron Sputtering is a novel physical vapor deposition technique that produces homogeneous coatings. In this study, CrN and CrAlN monolayer coatings were deposited on AISI 304 stainless steel substrates using HiPIMS. X-Ray Diffraction, Scanning Electron Microscopy, Atomic Force Microscopy were used to evaluate the microstructure, phase composition, morphology and chemical composition of the coating. Results showed that HiPIMS is a promising technique to deposit CrN and CrAlN homogeneous coatings with high hardness and good adhesion to the substrate.</p></div

Self-sterilizing ormosils surfaces based on photo-synzthesized silver nanoparticles

Medical device-related infections represent a major healthcare complication, resulting in potential risks for the patient. Antimicrobial materials comprise an attractive strategy against bacterial colonization and biofilm proliferation. However, in most cases these materials are only bacteriostatic or bactericidal, and consequently they must be used in combination with other antimicrobials in order to reach the eradication condition (no viable microorganisms). In this study, a straightforward and robust antibacterial coating based on Phosphotungstate Ormosil doped with core-shell (SiO₂@TiO₂) was developed using sol-gel process, chemical tempering, and Ag nanoparticle photoassisted synthesis (POrs-CS-Ag). The coating was characterized by X-ray Fluorescence Spectroscopy (XRF), Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and X-ray Photoelectron Microscopy (XPS). The silver free coating displays low antibacterial activity against "Staphylococcus aureus" and "Pseudomonas aeruginosa", in opposition to the silver loaded ones, which are able to completely eradicate these strains. Moreover, the antimicrobial activity of these substrates remains high until three reutilization cycles, which make them a promising strategy to develop self-sterilizing materials, such as POrs-CS-Ag-impregnated fabric, POrs-CS-Ag coated indwelling metals and polymers, among other materials.Facultad de Ciencias ExactasInstituto de Investigaciones Fisicoquímicas Teóricas y Aplicada