Generation of angular-momentum-dominated electron beams from a photoinjector

Various projects under study require an angular-momentum-dominated electron beam generated by a photoinjector. Some of the proposals directly use the angular-momentum-dominated beams (e.g. electron cooling of heavy ions), while others require the beam to be transformed into a flat beam (e.g. possible electron injectors for light sources and linear colliders). In this paper, we report our experimental study of an angular-momentum-dominated beam produced in a photoinjector, addressing the dependencies of angular momentum on initial conditions. We also briefly discuss the removal of angular momentum. The results of the experiment, carried out at the Fermilab/NICADD Photoinjector Laboratory, are found to be in good agreement with theoretical and numerical models.Comment: 8 pages, 7 figures, submitted to Phys. Rev. ST Accel. Beam

A plan for the development of superconducting Undulator prototypes for LCLS-II and future FELs

Undulators serve as the primary source of radiation for modern storage rings, and more recently for the advent of Free-Electron Lasers (FELs). The performance of future FELs can be greatly enhanced using the much higher magnetic fields of superconducting undulators (SCU) [1]. For example, the LCLS-II hard x-ray undulator can be shortened by up to 70 m using an SCU in place of a PMU (permanent magnet undulator), or its spectral performance can be critically improved when using a similar length. In addition, SCUs are expected to be orders of magnitude less sensitive to radiation dose; a major issue at LCLS-II with its 1-MHz electron bunch rate. We present a funded R&D collaboration between SLAC, ANL, and LBNL, which aims to demonstrate the viability of superconducting undulators for FELs by building, testing, measuring, and tuning two 1.5-m long planar SCU prototypes using two different technologies: NbTi at ANL and Nb Sn at LBNL. Our goal is to review and reassess the LCLS-II HXR baseline plans (PMU) in July of 2015, after the development and evaluation of both prototypes, possibly in favor of an SCU for LCLS-II.

Human factors in general practice: early thoughts on the educational focus for specialty training and beyond

In the third article in the series, we describe the outputs from a series of roundtable discussions by Human Factors experts and General Practice (GP) Educational Supervisors tasked with examining the GP (family medicine) training and work environments through the lens of the systems and designed-centred discipline of Human Factors and Ergonomics (HFE). A prominent issue agreed upon proposes that the GP setting should be viewed as a complex sociotechnical system from a care service and specialty training perspective. Additionally, while the existing GP specialty training curriculum in the United Kingdom (UK) touches on some important HFE concepts, we argue that there are also significant educational gaps that could be addressed (e.g. physical workplace design, work organisation, the design of procedures, decision-making and human reliability) to increase knowledge and skills that are key to understanding workplace complexity and interactions, and supporting everyday efforts to improve the performance and wellbeing of people and organisations. Altogether we propose and illustrate how future HFE content could be enhanced, contexualised and integrated within existing training arrangements, which also serves as a tentative guide in this area for continuing professional development for the wider GP and primary care teams

When passive feels active - delusion-proneness alters self-recognition in the moving rubber hand illusion

Psychotic patients have problems with bodily self-recognition such as the experience of self-produced actions (sense of agency) and the perception of the body as their own (sense of ownership). While it has been shown that such impairments in psychotic patients can be explained by hypersalient processing of external sensory input it has also been suggested that they lack normal efference copy in voluntary action. However, it is not known how problems with motor predictions like efference copy contribute to impaired sense of agency and ownership in psychosis or psychosis-related states. We used a rubber hand illusion based on finger movements and measured sense of agency and ownership to compute a bodily self-recognition score in delusion-proneness (indexed by Peters’ Delusion Inventory - PDI). A group of healthy subjects (n=71) experienced active movements (involving motor predictions) or passive movements (lacking motor predictions). We observed a highly significant correlation between delusion-proneness and self-recognition in the passive conditions, while no such effect was observed in the active conditions. This was seen for both ownership and agency scores. The result suggests that delusion-proneness is associated with hypersalient external input in passive conditions, resulting in an abnormal experience of the illusion. We hypothesize that this effect is not present in the active condition because deficient motor predictions counteract hypersalience in psychosis proneness

High-gradient normal-conducting RF structures for muon cooling channels

We present a status report on the research and development of high-gradient normal-conducting RF structures for the ionization cooling of muons in a neutrino factory or muon collider. High-gradient RF structures are required in regions enclosed in strong focusing solenoidal magnets, precluding the application of superconducting RF technology [1]. We propose using linear accelerating structures, with individual cells electromagnetically isolated, to achieve the required gradients of over 15 MV/m at 201 MHz and 30 MV/m at 805 MHz. Each cell will be powered independently, and cell length and drive phase adjusted to optimize shunt impedance of the assembled structure. This efficient design allows for relatively small field enhancement on the structure walls, and an accelerating field approximately 1.7 times greater than the peak surface field. The electromagnetic boundary of each cell may be provided by a thin Be sheet, or an assembly of thin-walled metal tubes. Use of thin, low-Z materials will allow passage of the muon beams without significant deterioration in beam quality due to scattering. R and D in design and analysis of robust structures that will operate under large electric and magnetic fields and RF current heating are discussed, including the experimental program based in a high-power test laboratory developed for this purpose

Understanding the role of objects in cross-disciplinary collaboration

In this paper we make a case for the use of multiple theoretical perspectives – theory on boundary objects, epistemic objects, cultural historical activity theory and objects as infrastructure - to understand the role of objects in cross-disciplinary collaboration. A pluralist approach highlights that objects perform at least three types of work in this context: they motivate collaboration; they allow participants to work across different types of boundaries; and they constitute the fundamental infrastructure of the activity. Building on the results of an empirical study we illustrate the insights that each theoretical lens affords into practices of collaboration and develop a novel analytical framework that organizes objects according to the active work they perform. Our framework can help shed new light on the phenomenon, especially with regards the shifting status of objects and sources of conflict (and change) in collaboration. After discussing these novel insights, we outline directions for future research stemming from a pluralist approach. We conclude by noting the managerial implications of our finding

Evolution of Fruit Traits in Ficus Subgenus Sycomorus (Moraceae): To What Extent Do Frugivores Determine Seed Dispersal Mode?

Fig trees are a ubiquitous component of tropical rain forests and exhibit an enormous diversity of ecologies. Focusing on Ficus subgenus Sycomorus, a phenotypically diverse and ecologically important Old World lineage, we examined the evolution of fruit traits using a molecular phylogeny constructed using 5 kilobases of DNA sequence data from 63 species (50% of global diversity). In particular, we ask whether patterns of trait correlations are consistent with dispersal agents as the primary selective force shaping morphological diversity or if other ecological factors may provide a better explanation? Fig colour, size and placement (axial, cauliflorous, or geocarpic) were all highly evolutionarily liable, and the same fruit traits have evolved in different biogeographic regions with substantially different dispersal agents. After controlling for phylogenetic autocorrelation, we found that fig colour and size were significantly associated with fig placement and plant-life history traits (maximum plant height and leaf area, respectively). However, contrary to prevailing assumptions, fig placement correlated poorly with known dispersal agents and appears more likely determined by other factors, such as flowering phenology, nutrient economy, and habitat preference. Thus, plant life-history, both directly and through its influence on fig placement, appears to have played a prominent role in determining fruit traits in these figs

Use of satellite observations for operational oceanography: recent achievements and future prospects

The paper gives an overview of the development of satellite oceanography over the past five years focusing on the most relevant issues for operational oceanography. Satellites provide key essential variables to constrain ocean models and/or serve downstream applications. New and improved satellite data sets have been developed and have directly improved the quality of operational products. The status of the satellite constellation for the last five years was, however, not optimal. Review of future missions shows clear progress and new research and development missions with a potentially large impact for operational oceanography should be demonstrated. Improvement of data assimilation techniques and developing synergetic use of high resolution satellite observations are important future priorities

Status of Muon Collider Research and Development and Future Plans

The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay ($\pi \to \mu \nu_{\mu}$) channel, muon cooling, acceleration, storage in a collider ring and the collider detector. We also present theoretical and experimental R & D plans for the next several years that should lead to a better understanding of the design and feasibility issues for all of the components. This report is an update of the progress on the R & D since the Feasibility Study of Muon Colliders presented at the Snowmass'96 Workshop [R. B. Palmer, A. Sessler and A. Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics (Stanford Linear Accelerator Center, Menlo Park, CA, 1997)].Comment: 95 pages, 75 figures. Submitted to Physical Review Special Topics, Accelerators and Beam