282 research outputs found
Tree species, crown cover, and age as determinants of the vertical distribution of airborne LiDAR returns
Light detection and ranging (LiDAR) provides information on the vertical
structure of forest stands enabling detailed and extensive ecosystem study. The
vertical structure is often summarized by scalar features and data-reduction
techniques that limit the interpretation of results. Instead, we quantified the
influence of three variables, species, crown cover, and age, on the vertical
distribution of airborne LiDAR returns from forest stands. We studied 5,428
regular, even-aged stands in Quebec (Canada) with five dominant species: balsam
fir (Abies balsamea (L.) Mill.), paper birch (Betula papyrifera Marsh), black
spruce (Picea mariana (Mill.) BSP), white spruce (Picea glauca Moench) and
aspen (Populus tremuloides Michx.). We modeled the vertical distribution
against the three variables using a functional general linear model and a novel
nonparametric graphical test of significance. Results indicate that LiDAR
returns from aspen stands had the most uniform vertical distribution. Balsam
fir and white birch distributions were similar and centered at around 50% of
the stand height, and black spruce and white spruce distributions were skewed
to below 30% of stand height (p<0.001). Increased crown cover concentrated the
distributions around 50% of stand height. Increasing age gradually shifted the
distributions higher in the stand for stands younger than 70-years, before
plateauing and slowly declining at 90-120 years. Results suggest that the
vertical distributions of LiDAR returns depend on the three variables studied
Correction, update, and enhancement of vectorial forestry road maps using ALS data, a pathfinder, and seven metrics
Accurate information about forestry roads is a key aspect of forest management in terms of economy (e.g. accessibility, cost, optimal path) and ecology (e.g. wildfire and wildlife protection). In Canada, and in fact, globally, most provincial, state or territory governments maintain vectorial information on the forestry roads under their jurisdiction. However, official maps are not always accurate, may lack road attributes of interest and are not always up-to-date. Airborne Laser Scanning (ALS) has become an established technology to accurately characterize and map broad territories by providing high density 3D point-clouds with, at least, 3 or 4 measurements per square meter.
This paper addresses the problem of the automatic updating, fixing, and enhancement of vectorial forestry road maps over large landscapes (¿10000 km2). For this purpose, we developed a production ready, documented and open-source software. From metrics derived from the point-cloud the method produces a raster of road probability. It then uses an existing, inaccurate, map of the road network to define approximate start and end points for each road. Then, a pathfinder retrieves the accurate road shape by computing the least cost path between the two points on the probability raster. Using the accurate road position given by the algorithm, road width and road state are then estimated based the on characteristics of the point-cloud. We demonstrate that our algorithm retrieves the centrelines of roads in a natively vectorial form with an error below 3 m in 95% of the roads using a fully automatic method. The accuracy of the road location allows us to derive other accurate measurements, including the state of the roads
Recommended from our members
Technological Advancement in Tower-Based Canopy Reflectance Monitoring: The AMSPEC-III System
Understanding plant photosynthesis, or Gross Primary Production (GPP), is a crucial aspect of quantifying the terrestrial carbon cycle. Remote sensing approaches, in particular multi-angular spectroscopy, have proven successful for studying relationships between canopy-reflectance and plant-physiology processes, thus providing a mechanism to scale up. However, many different instrumentation designs exist and few cross-comparisons have been undertaken. This paper discusses the design evolution of the Automated Multiangular SPectro-radiometer for Estimation of Canopy reflectance (AMSPEC) series of instruments. Specifically, we assess the performance of the PP-Systems Unispec-DC and Ocean Optics JAZ-COMBO spectro-radiometers installed on an updated, tower-based AMSPEC-III system. We demonstrate the interoperability of these spectro-radiometers, and the results obtained suggest that JAZ-COMBO can successfully be used to substitute more expensive measurement units for detecting and investigating photosynthesis and canopy spectra. We demonstrate close correlations between JAZ-COMBO and Unispec-DC measured canopy radiance (0.75 ≤ R² ≤ 0.85) and solar irradiance (0.95 ≤ R² ≤ 0.96) over a three month time span. We also demonstrate close agreement between the bi-directional distribution functions obtained from each instrument. We conclude that cost effective alternatives may allow a network of AMSPEC-III systems to simultaneously monitor various vegetation types in different ecosystems. This will allow to scale and improve our understanding of the interactions between vegetation physiology and spectral characteristics, calibrate broad-scale observations to stand-level measurements, and ultimately lead to improved understanding of changing vegetation spectral features from satellite.Keywords: multi-angle spectroscopy,
photosynthesis,
PRI,
gross primary production,
spectro-radiometer,
light use efficiency,
remote sensingThis is the publisher’s final pdf. The published article is copyrighted by the author(s) and published by MDPI. The published article can be found at: http://www.mdpi.com/journal/sensor
Analysis of Implementation the Evaluation of Guidance and Counseling Program at Senior High Schools of Singkawang
Focus of this study are (1) describe and analyze the implementation of the guidance and counseling program, (2) find some factors inhibiting the implementation of the guidance and counseling program. This study uses qualitative methods; using interview data collecting technique, tested its validity through triangulation. Subjects in this study are all teachers of guidance and counseling in the Senior High School of Singkawang as many as 10 people as well as principals and supervisors as the informants with the total of 11 people. Results (1) the implementation of evaluation of guidance and counseling program by the teachers still has many weaknesses on each phase of the evaluation, such as not understanding the evaluation models of the guidance and counseling program, how to apply them, and monitoring process that is not done in deeply and in detail, (2) Some factors inhibiting the implementation of the evaluation of guidance and counseling program are lack of knowledge and understanding of the evaluation of guidance and counseling program in the schools, lack of interest in developing professional competencies, and lack of guidance to the teachers in implementing the guidance and counseling evaluation program
Assessing the impact of illumination on UAV pushbroom hyperspectral imagery collected under various cloud cover conditions
The recent development of small form-factor (<6 kg), full range (400–2500 nm) pushbroom hyperspectral imaging systems (HSI) for unmanned aerial vehicles (UAV) poses a new range of opportunities for passive remote sensing applications. The flexible deployment of these UAV-HSI systems have the potential to expand the data acquisition window to acceptable (though non-ideal) atmospheric conditions. This is an important consideration for time-sensitive applications (e.g. phenology) in areas with persistent cloud cover. Since the majority of UAV studies have focused on applications with ideal illumination conditions (e.g. minimal or non-cloud cover), little is known to what extent UAV-HSI data are affected by changes in illumination conditions due to variable cloud cover. In this study, we acquired UAV pushbroom HSI (400–2500 nm) over three consecutive days with various illumination conditions (i.e. cloud cover), which were complemented with downwelling irradiance data to characterize illumination conditions and in-situ and laboratory reference panel measurements across a range of reflectivity (i.e. 2%, 10%, 18% and 50%) used to evaluate reflectance products. Using these data we address four fundamental aspects for UAV-HSI acquired under various conditions ranging from high (624.6 ± 16.63 W·m2) to low (2.5 ± 0.9 W·m2) direct irradiance: atmospheric compensation, signal-to-noise ratio (SNR), spectral vegetation indices and endmembers extraction. For instance, two atmospheric compensation methods were applied, a radiative transfer model suitable for high direct irradiance, and an Empirical Line Model (ELM) for diffuse irradiance conditions. SNR results for two distinctive vegetation classes (i.e. tree canopy vs herbaceous vegetation) reveal wavelength dependent attenuation by cloud cover, with higher SNR under high direct irradiance for canopy vegetation. Spectral vegetation index (SVIs) results revealed high variability and index dependent effects. For example, NDVI had significant differences (p < 0.05) across illumination conditions, while NDWI appeared insensitive at the canopy level. Finally, often neglected diffuse illumination conditions may be beneficial for revealing spectral features in vegetation that are obscured by the predominantly non-Lambertian reflectance encountered under high direct illumination. To our knowledge, our study is the first to use a full range pushbroom UAV sensor (400–2500 nm) for assessing illumination effects on the aforementioned variables. Our findings pave the way for understanding the advantages and limitations of ultra-high spatial resolution full range high fidelity UAV-HSI for ecological and other applications
Using digital time-lapse cameras to monitor species-specific understorey and overstorey phenology in support of wildlife habitat assessment
Critical to habitat management is the understanding of not only the location of animal food resources, but also the timing of their availability. Grizzly bear (Ursus arctos) diets, for example, shift seasonally as different vegetation species enter key phenological phases. In this paper, we describe the use of a network of seven ground-based digital camera systems to monitor understorey and overstorey vegetation within species-specific regions of interest. Established across an elevation gradient in western Alberta, Canada, the cameras collected true-colour (RGB) images daily from 13 April 2009 to 27 October 2009. Fourth-order polynomials were fit to an RGB-derived index, which was then compared to field-based observations of phenological phases. Using linear regression to statistically relate the camera and field data, results indicated that 61% (r 2?= 0.61, df = 1, F?= 14.3, p?= 0.0043) of the variance observed in the field phenological phase data is captured by the cameras for the start of the growing season and 72% (r 2?= 0.72, df = 1, F?= 23.09, p?= 0.0009) of the variance in length of growing season. Based on the linear regression models, the mean absolute differences in residuals between predicted and observed start of growing season and length of growing season were 4 and 6 days, respectively. This work extends upon previous research by demonstrating that specific understorey and overstorey species can be targeted for phenological monitoring in a forested environment, using readily available digital camera technology and RGB-based vegetation indices
Assessing spectral measures of post-harvest forest recovery with field plot data
Information regarding the nature and rate of forest recovery is required to inform forest management, monitoring, and reporting activities. Delayed establishment or return of forests has implications to harvest rotations and carbon uptake, among others, creating a need for spatially-explicit, large-area, characterizations of forest recovery. Landsat time series (LTS) has been demonstrated as a means to quantitatively relate forest recovery, noting that there are gaps in our understanding of the linkage between spectral measures of forest recovery and manifestations of forest structure and composition. Field plots provide a means to better understand the linkage between forest characteristics and spectral recovery indices. As such, from a large set of existing field plots, we considered the conditions present for the year in which the co-located pixel was considered spectrally recovered using the Years to Recovery (Y2R) metric. Y2R is a long-term metric of spectral recovery that indicates the number of years required for a pixel to return to 80% of its pre-disturbance Normalized Burn Ratio value. Absolute and relative metrics of recovery at 5 years post-disturbance were also considered. We used these three spectral recovery metrics to predict the stand development class assigned by the field crew for 284 seedling plots with an overall accuracy of 73.59%, with advanced seedling stands more accurately discriminated (omission error, OE = 15.74%) than young seedling stands (OE = 49.84%). We then used field-measured attributes (e.g. height, stem density, dominant species) from the seedling plots to classify the plots into three spectral recovery groups, which were defined using the Y2R metric: spectral recovery in (1) 1–5 years, (2) 6–10 years, or (3) 11–15 years. Overall accuracy for spectral recovery groups was 61.06%. Recovery groups 1 and 3 were discriminated with greater accuracy (producer’s and user’s accuracies > 66%) than recovery group 2 ( 66%) than recovery group 2 ( 66%) than recovery group 2 (<50%). The top field-measured predictors of spectral recovery were mean height, dominant species, and percentage of stems in the plot that were deciduous. Variability in stand establishment and condition make it challenging to accurately discriminate among recovery rates within 10 years post-harvest. Our results indicate that the long-term metric Y2R relates to forest structure and composition attributes measured in the field and that spectral development post-disturbance corresponds with expectations of structural development, particularly height, for different species, site types, and deciduous abundance. These results confirm the utility of spectral recovery measures derived from LTS data to augment landscape-level assessments of post-disturbance recovery.Peer reviewe
Variability of wood properties using airborne and terrestrial laser scanning
Information on wood properties is crucial in estimating wood quality and forest biomass and thus developing the precision and sustainability of forest management and use. However, wood properties are highly variable between and within trees due to the complexity of wood formation. Therefore, tree-specific field references and spatially transferable models are required to capture the variability of wood quality and forest biomass at multiple scales, entailing high-resolution terrestrial and aerial remote sensing methods. Here, we aimed at identifying select tree traits that indicate wood properties (i.e. wood quality indicators) with a combination of terrestrial laser scanning (TLS) and airborne laser scanning (ALS) in an examination of 27 even-aged, managed Scots pine (Pinus sylvestris L.) stands in southern Finland. We derived the wood quality indicators from tree models sampled systematically from TLS data and built prediction models with respect to individual crown features delineated from ALS data. The models were incapable of predicting explicit branching parameters (height of the lowest dead branch R2 = 0.25, maximum branch diameter R2 = 0.03) but were suited to predicting stem and crown dimensions from stand, tree, and competition factors (diameter at breast height and sawlog volume R2 = 0.5, and live crown base height R2 = 0.4). We were able to identify the effect of canopy closure on crown longevity and stem growth, which are pivotal to the variability of several wood properties in managed forests. We discussed how the fusions of high-resolution remote sensing methods may be used to enhance sustainable management and use of natural resources in the changing environment.Peer reviewe
Implications of differing input data sources and approaches upon forest carbon stock estimation
Site index is an important forest inventory attribute that relates productivity and growth expectation of forests over time. In forest inventory programs, site index is used in conjunction with other forest inventory attributes (i.e., height, age) for the estimation of stand volume. In turn, stand volumes are used to estimate biomass (and biomass components) and enable conversion to carbon. In this research, we explore the implications and consequences of different estimates of site index on carbon stock characterization for a 2,500-ha Douglas-fir-dominated landscape located on Eastern Vancouver Island, British Columbia, Canada. We compared site index estimates from an existing forest inventory to estimates generated from a combination of forest inventory and light detection and ranging (LIDAR)-derived attributes and then examined the resultant differences in biomass estimates generated from a carbon budget model (Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3)). Significant differences were found between the original and LIDAR-derived site indices for all species types and for the resulting 5-m site classes (p < 0.001). The LIDAR-derived site class was greater than the original site class for 42{\%} of stands; however, 77{\%} of stands were within +/-1 site class of the original class. Differences in biomass estimates between the model scenarios were significant for both total stand biomass and biomass per hectare (p < 0.001); differences for Douglas-fir-dominated stands (representing 85{\%} of all stands) were not significant (p = 0.288). Overall, the relationship between the two biomass estimates was strong (R(2) = 0.92, p < 0.001), suggesting that in certain circumstances, LIDAR may have a role to play in site index estimation and biomass mapping
- …