Superconducting Gatemon Qubit based on a Proximitized Two-Dimensional Electron Gas

The coherent tunnelling of Cooper pairs across Josephson junctions (JJs) generates a nonlinear inductance that is used extensively in quantum information processors based on superconducting circuits, from setting qubit transition frequencies and interqubit coupling strengths, to the gain of parametric amplifiers for quantum-limited readout. The inductance is either set by tailoring the metal-oxide dimensions of single JJs, or magnetically tuned by parallelizing multiple JJs in superconducting quantum interference devices (SQUIDs) with local current-biased flux lines. JJs based on superconductor-semiconductor hybrids represent a tantalizing all-electric alternative. The gatemon is a recently developed transmon variant which employs locally gated nanowire (NW) superconductor-semiconductor JJs for qubit control. Here, we go beyond proof-of-concept and demonstrate that semiconducting channels etched from a wafer-scale two-dimensional electron gas (2DEG) are a suitable platform for building a scalable gatemon-based quantum computer. We show 2DEG gatemons meet the requirements by performing voltage-controlled single qubit rotations and two-qubit swap operations. We measure qubit coherence times up to ~2 us, limited by dielectric loss in the 2DEG host substrate

Evidence for formation of multi-quantum dots in hydrogenated graphene.

We report the experimental evidence for the formation of multi-quantum dots in a hydrogenated single-layer graphene flake. The existence of multi-quantum dots is supported by the low-temperature measurements on a field effect transistor structure device. The resulting Coulomb blockade diamonds shown in the color scale plot together with the number of Coulomb peaks exhibit the characteristics of the so-called 'stochastic Coulomb blockade'. A possible explanation for the formation of the multi-quantum dots, which is not observed in pristine graphene to date, was attributed to the impurities and defects unintentionally decorated on a single-layer graphene flake which was not treated with the thermal annealing process. Graphene multi-quantum dots developed around impurities and defect sites during the hydrogen plasma exposure process.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are

The Galaxy Luminosity Function and Luminosity Density at Redshift z=0.1

Using a catalog of 147,986 galaxy redshifts and fluxes from the Sloan Digital Sky Survey (SDSS), we measure the galaxy luminosity density at z = 0.1 in five optical bandpasses corresponding to the SDSS bandpasses shifted to match their rest-frame shape at z = 0.1. We denote the bands (0.1)u, (0.1)g, (0.1)r, (0.1)i, (0.1)z with lambda(eff) = (3216; 4240; 5595; 6792; 8111 Angstrom), respectively. To estimate the luminosity function, we use a maximum likelihood method that allows for a general form for the shape of the luminosity function,fits for simple luminosity and number evolution, incorporates the flux uncertainties, and accounts for the flux limits of the survey. We find luminosity densities at z = 0.1 expressed in absolute AB magnitudes in a Mpc(3) to be (-14.10 +/- 0.15, -15.18 +/- 0.03, - 15.90 +/- 0.03, -16.24 +/- 0.03, -16.56 +/- 0.02) in ((0.1)u, (0.1)g, (0.1)r, (0.1)i, (0.1)z), respectively, for a cosmological model with Omega(0) = 0.3, Omega(Lambda) = 0.7, and h = 1 and using SDSS Petrosian magnitudes. Similar results are obtained using Sersic model magnitudes, suggesting that flux from outside the Petrosian apertures is not a major correction. In the (0.1)r band, the best-fit Schechter function to our results has phi* = (1.49 +/- 0.04) x 10(-2) h(3) Mpc(-3), M-* - 5 log(10) h = - 20.44 +/- 0.01, and alpha = - 1.05 +/- 0.01. In solar luminosities, the luminosity density in (0.1)r is (1.84 +/- 0.04) x 10(8) h L-0.1r,L-. Mpc(-3). Our results in the (0.1)g band are consistent with other estimates of the luminosity density, from the Two-Degree Field Galaxy Redshift Survey and the Millennium Galaxy Catalog. They represent a substantial change ( similar to 0.5 mag) from earlier SDSS luminosity density results based on commissioning data, almost entirely because of the inclusion of evolution in the luminosity function model

Integration of selectively grown topological insulator nanoribbons in superconducting quantum circuits

We report on the precise integration of nm-scale topological insulator Josephson junctions into mm-scale superconducting quantum circuits via selective area epitaxy and local stencil lithography. By studying dielectric losses of superconducting microwave resonators fabricated on top of our selective area growth mask, we verify the compatibility of this in situ technique with microwave applications. We probe the microwave response of on-chip microwave cavities coupled to topological insulator-shunted superconducting qubit devices and observe a power dependence that indicates nonlinear qubit behaviour. Our method enables integration of complex networks of topological insulator nanostructures into superconducting circuits, paving the way for both novel voltage-controlled Josephson and topological qubits.Comment: 11 pages, 6 figure

Imaging Bulk and Edge Transport near the Dirac Point in Graphene Moiré Superlattices.

Van der Waals structures formed by aligning monolayer graphene with insulating layers of hexagonal boron nitride exhibit a moiré superlattice that is expected to break sublattice symmetry. Despite an energy gap of several tens of millielectronvolts opening in the Dirac spectrum, electrical resistivity remains lower than expected at low temperature and varies between devices. While subgap states are likely to play a role in this behavior, their precise nature is unclear. We present a scanning gate microscopy study of moiré superlattice devices with comparable activation energy but with different charge disorder levels. In the device with higher charge impurity (∼1010 cm-2) and lower resistivity (∼10 kΩ) at the Dirac point we observe current flow along the graphene edges. Combined with simulations, our measurements suggest that enhanced edge doping is responsible for this effect. In addition, a device with low charge impurity (∼109 cm-2) and higher resistivity (∼100 kΩ) shows subgap states in the bulk, consistent with the absence of shunting by edge currents.This work was partly supported by EPSRC EP/L020963/1, JST CREST Grant Numbers JPMJCR15F3 and JSPS KAKENHI Grant Numbers JP25107003, JP25107004, JP26248061, JP15H01010, JP16H00982

Global warming and recurrent mass bleaching of corals

During 2015–2016, record temperatures triggered a pan-tropical episode of coral bleaching, the third global-scale event since mass bleaching was first documented in the 1980s. Here we examine how and why the severity of recurrent major bleaching events has varied at multiple scales, using aerial and underwater surveys of Australian reefs combined with satellite-derived sea surface temperatures. The distinctive geographic footprints of recurrent bleaching on the Great Barrier Reef in 1998, 2002 and 2016 were determined by the spatial pattern of sea temperatures in each year. Water quality and fishing pressure had minimal effect on the unprecedented bleaching in 2016, suggesting that local protection of reefs affords little or no resistance to extreme heat. Similarly, past exposure to bleaching in 1998 and 2002 did not lessen the severity of bleaching in 2016. Consequently, immediate global action to curb future warming is essential to secure a future for coral reefs

Staphylococcus aureus Induces Eosinophil Cell Death Mediated by α-hemolysin

Staphylococcus aureus, a major human pathogen, exacerbates allergic disorders, including atopic dermatitis, nasal polyps and asthma, which are characterized by tissue eosinophilia. Eosinophils, via their destructive granule contents, can cause significant tissue damage, resulting in inflammation and further recruitment of inflammatory cells. We hypothesised that the relationship between S. aureus and eosinophils may contribute to disease pathology. We found that supernatants from S. aureus (SH1000 strain) cultures cause rapid and profound eosinophil necrosis, resulting in dramatic cell loss within 2 hours. This is in marked contrast to neutrophil granulocytes where no significant cell death was observed (at equivalent dilutions). Supernatants prepared from a strain deficient in the accessory gene regulator (agr) that produces reduced levels of many important virulence factors, including the abundantly produced α-hemolysin (Hla), failed to induce eosinophil death. The role of Hla in mediating eosinophil death was investigated using both an Hla deficient SH1000-modified strain, which did not induce eosinophil death, and purified Hla, which induced concentration-dependent eosinophil death via both apoptosis and necrosis. We conclude that S. aureus Hla induces aberrant eosinophil cell death in vitro and that this may increase tissue injury in allergic disease

Customer Interaction and Innovation in Hybrid Offerings:Investigating Moderation and Mediation Effects for Goods and Services Innovation

Hybrid offerings are bundles of goods and services offerings provided by the same firm. Bundling value offerings affects how firms innovate, interact with customers, and customize their goods and services. However, it remains unclear how customer interaction might drive the innovation performance of various bundled components. Therefore, this study investigates the effects of customer interactions and service customization on both goods and services innovations in a hybrid offering context, using a unique data set of 146 information technology and manufacturing firms. Customer interaction appears beneficial to both goods and services innovation in a hybrid offerings context, but service customization has different direct effects on goods versus services innovation. As a potential mediator, customer knowledge mobilization resources exert different effects on the goods and services elements of hybrid offerings. Furthermore, for high-interaction customers, medium levels of technical modularity lead to most favorable innovation outcomes for services innovation. The results thus suggest that providers of hybrid offerings should foster customer interactions, to drive the innovation performance of the good and service components, while still making sure to implement service customization strategies. These findings have notable implications for service innovation research