A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures

This paper reports a study of linear elastic analysis of two-dimensional piezoelectric structures using a smoothed four-node piezoelectric element. The element is built by incorporating the strain smoothing method of mesh-free conforming nodal integration into the standard four-node quadrilateral piezoelectric finite element. The approximations of mechanical strains and electric potential fields are normalized using a constant smoothing function. This allows the field gradients to be directly computed from shape functions. No mapping or coordinate transformation is necessary so that the element can be used in arbitrary shapes. Through several examples, the simplicity, efficiency and reliability of the element are demonstrated. Numerical results and comparative studies with other existing solutions in the literature suggest that the present element is robust, computationally inexpensive and easy to implement

An improved quadrilateral flat element with drilling degrees of freedom for shell structural analysis

This paper reports the development of a simple and efficient 4-node flat shell element with six degrees of freedom per node for the analysis of arbitrary shell structures. The element is developed by incorporating a strain smoothing technique into a flat shell finite element approach. The membrane part is formulated by applying the smoothing operation on a quadrilateral membrane element using Allman-type interpolation functions with drilling DOFs. The plate-bending component is established by a combination of the smoothed curvature and the substitute shear strain fields. As a result, the bending and a part of membrane stiffness matrices are computed on the boundaries of smoothing cells which leads to very accurate solutions, even with distorted meshes, and possible reduction in computational cost. The performance of the proposed element is validated and demonstrated through several numerical benchmark problems. Convergence studies and comparison with other existing solutions in the literature suggest that the present element is efficient, accurate and free of lockings

Free vibration analysis of laminated composite plates based on FSDT using one-dimensional IRBFN method

This paper presents a new effective radial basis function (RBF) collocation technique for the free vibration analysis of laminated composite plates using the first order shear deformation theory (FSDT). The plates, which can be rectangular or non-rectangular, are simply discretised by means of Cartesian grids. Instead of using conventional differentiated RBF networks, one-dimensional integrated RBF networks (1D-IRBFN) are employed on grid lines to approximate the field variables. A number of examples concerning various thickness-to-span ratios, material properties and boundary conditions are considered. Results obtained are compared with the exact solutions and numerical results by other techniques in the literature to investigate the performance of the proposed method

A control volume scheme using compact integrated radial basis function stencils for solving the Richards equation

A new control volume approach is developed based on compact integrated radial basis function (CIRBF) stencils for solution of the highly nonlinear Richards equation describing transient water flow in variably saturated soils. Unlike the conventional control volume method, which is regarded as second-order accurate, the proposed approach has high-order accuracy owing to the use of a compact integrated radial basis function approximation that enables improved flux predictions. The method is used to solve the Richards equation for transient flow in 1D homogeneous and heterogeneous soil profiles. Numerical results for different boundary conditions, initial conditions and soil types are shown to be in good agreement with Warrick's semi-analytical solution and simulations using the HYDRUS-1D software package. Results obtained with the proposed method were far less dependent upon the grid spacing than the HYDRUS-1D finite element solutions

Characterization of pig farms in Hung Yen, Hai Duong and Bac Ninh provinces

peer reviewedIn order to characterization of pig farms in the Red River Delta, a study was conducted on 90 pig farms in Hung Yen, Hai Duong and Bac Ninh provinces from June to December 2006. Results show that most of the pig farms had been built for five years with a small size (0.5 hectare per farm). The invested capital was about 300-400 millions VND per farm. Four main sow groups used in the farms included crossbred exotic sows (51.1%), crossbred sow between local and exotic breeds (14.4%), purebred Landrace and Yorkshire breeds (15.6 and 18.9%, respectively). The boars were various (Duroc 30%, Yorkshire 21%, Landrace 13%, PiÐtrain × Duroc 36% and others). The pigs farms were faced with several difficulties such as limited land, lack of invested capital, uncontrolled quality of breeding pigs, high costs of feed, poor hygiene condition and diseases

Association between ACE I/D genetic polymorphism and the severity of coronary artery disease in Vietnamese patients with acute myocardial infarction

BackgroundThe severity of coronary artery disease is a prognostic factor for major adverse cardiovascular events in patients diagnosed with acute myocardial infarction. ACE I/D polymorphism is one of the genetic factors that may affect the severity of coronary artery disease. This study aimed to investigate the association between ACE I/D genotypes and the severity of coronary artery disease in patients with acute myocardial infarction.Materials and methodsA single-center, prospective, observational study was conducted at the Department of Cardiology and Department of Interventional Cardiology, Cho Ray Hospital, Ho Chi Minh City, Vietnam from January 2020 to June 2021. All participants diagnosed with acute myocardial infarction underwent contrast-enhanced coronary angiography. The severity of coronary artery disease was determined by Gensini score. ACE I/D genotypes were identified in all subjects by using the polymerase chain reaction method.ResultsA total of 522 patients diagnosed with first acute myocardial infarction were recruited. The patients' median Gensini score was 34.3. The II, ID, and DD genotype rates of ACE I/D polymorphism were 48.9%, 36.4%, and 14.7%, respectively. After adjusting for confounding factors, multivariable linear regression analysis showed that the ACE DD genotype was independently associated with a higher Gensini score compared with the II or ID genotypes.ConclusionThe DD genotype of the ACE I/D polymorphism was associated with the severity of coronary artery disease in Vietnamese patients diagnosed with first acute myocardial infarction

AN UPDATED CHECKLIST AND COMMENTS FOR SECTION PIQUETIA (CAMELLIA, THEACEAE)

New Camellia species in section Piquetia have recently been discovered. It is necessary to enumerate the number of species and update the specific characteristics of this section. Based on the study of more than 30 pieces of literature and a large number of specimens, a total of 15 species belonging to section Piquetia, including two new species, are identified. A taxonomic key to all species is provided, and typical characteristics of the section are also discussed. Information on the distribution, ecology, and conservation status of each species, as well as notes on the differences between closely related species, is also provided.

. In vitro propagation of the new orchid Dendrobium trankimianum T. Yukawa

Dendrobium trankimianum T. Yukawa is a beautiful, endemic orchid of Vietnam, a new species with a first - published description in 2004. It is very rare and expected to be added to the IUCN Red List status - CR. In vitro studies of orchid D. trankimianum T. Yukawa were conducted in order to conserve and increase the genetic pool of this precious wild orchid species. The results showed that full-strength MS medium supplemented with 2.0 mg/L BA and 0.5 mg/L NAA (10.24 PLBs/explant; 90.11% explants formed PLBs) or full-strength MS medium supplemented with 1.5 mg/L TDZ and 0.5 mg/L NAA (14.11 PLBs/explant; 92.06% explants formed PLBs) were the most suitable for protocorm formation. For subculture, suitable growth of shoots were obtained on full-strength MS medium supplemented 1.5 mg/L BA (22.35 shoots/explant; shoots length of 1.96 cm) and full-strength MS medium supplemented with 60 g ripe banana per liter (25.11 shoots/explant; shoots length of 2.12 cm). The shoots in vitro were transferred to half-strength MS supplemented with different concentrations of IAA, IBA and NAA to investigate root formation. The best rooting occurred at 0,5 mg/L NAA (7.91 roots/shoot; root length of 4.01 cm; 98.51% root formation). The plantlets with uniform growth were planted on different substrate: Eco clean soil, Coconut fiber, Fern fiber, 50% Rice husk in combination with 50% Eco clean soil for research the most suitable substrate. After 60 days of transplantion and acclimatization, the result showed that Fern fiber was suitable substrate for plantlet growth in a nursery garden (8.0 roots/ explant; root length of 5.5 cm; survival rate of 93.29%)

Preliminary assessments of debris flow hazard in relation to geological environment changes in mountainous regions, North Vietnam

Debris flow, widely viewed by geo-scientists as a special combination of landslide and flash flood, causes devastating damages to people and environment in northern mountainous regions of Vietnam. Field observations in the areas damaged by debris flows in northern Vietnam identified types of soils and rocks that were more likely to cause debris flows. Unlike flash floods, almost debris flows occurred at the end of the rainy season when soils and rocks were water-oversaturated thus mechanically weak; this is when pore water pressure decreases, lowering the strength from the soil. Landslides causing debris flows are commonly current slides. The tip of a landslide is often confined within a stream that has a permanent or seasonal flow. Debris flows mainly occur in proluvium, colluvial deposits or tectonic breccia zones. However, not a debris flow initiated in a tectonic breccia zone has been recorded in the northern mountainous regions of Vietnam. Colluvial deposits have been intensively investigated by many researchers worldwide. These deposits are commonly formed in neo-tectonic active zones, weak bed rocks, particularly old metamorphic rocks such as sericite shale, terrigenous and Cenozoic or late Mesozoic volcanic sedimentary rocks that are distributed at steep slopes and/or highly differentiated reliefs. These features appear to be a prerequisite for the exogenous processes, including rolling stones, falling rocks, landslides and surface erosions to occur. To study the mechanical and physical properties of colluvial deposits, the most practical approach is conducting experiments with large-sized samples or on-site experiments. However, this approach is expensive and not always favorable. Applying the rock mechanical theory, it is possible to examine C, j values if values of geological characteristics of rock blocks are known. Thus, the present study attempts clarify the cause-feedback relationship between the change of geological environment and geological hazard in general, and debris flows, in particular, providing a basic scientific insight for studying and predicting debris flows.ReferencesBauziene L., 2000. Colluvisols as a component of erosional and accumulative soil cover structures of east lithuania. European soil Bureau -  research report (7), 147-151.Hoek E., Marinos P., 2007. A brief history of the development of the Hoek-Brown failure criterion, Soils and Rocks, 2, 1-8.Irfan T.Y., Tang K.Y., 1992. Effect of the coarse fractions on the shear strength of colluvium. Geo report No 23, Geotechnical Engineering office, Civil Engineering Department Hong Kong.Lai K. W., 2011. Geotechnical properties of colluvial and alluvial deposits in Hong Kong. The 5th cross-strait Conf on Structural and geotechnical engineering (SGE-5), 735-744, Hong Kong China, 13-15 July 2011.Ngo Van Liem, Phan Trong Trinh, Hoang Quang Vinh, Nguyen Van Huong, Nguyen Cong Quan, Tran Van Phong, Nguyen Phuc Dat, 2016. Analyze the correlation between the geomorphic indices and recent tectonics of the Lo River fault zone in southwest of Tam Dao range, Vietnam J. Earth Sci., 38(1), 1-13.Richard E. Gray, 2008. Landslide problems on appalachian colluvial slopes. Geohazards in transportation in the appalachian region, Charleston, WV.Robert W. Fleming, Johnson M. Arvid, 1994. Landslide in Colluvium. U.S. Geological Survey Bulletin 2059-B.Tran Trong Hue (edit), 2004. Integrated assessment of geological disasters in Vietnam territory and prevention solutions (Phase II: The northern mountainous provinces), Report on Phase II of the Independent National project. Institute of Geology, Hanoi, 2003.Tran Van Tu (edit), 1999. Study of the scientific basis of formation and development of mountain floods (including flash floods), proposing the solution of warning,  mitigation, and reduction of natural disasters and damage.  Report of the project of the Vietnam Centre for Science and Technology, 1998 - 1999.Tran Van Tu, 2012. Scientific basis and method to set up the map of zonation area for sweeping flood, Journal of Sciences of the Earth, 34(3), 7-13

Design of Mobile Manipulator for Fire Extinguisher Testing. Part I Key Specifications and Conceptual Design

All flames are extinguished as early as possible, or fire services have to deal with major conflagrations. This leads to the fact that the quality of fire extinguishers has become a very sensitive and important issue in firefighting. Inspired by the development of automatic fire fighting systems, this paper proposes key specifications based on the standard of fire extinguishers that is ISO 7165:2009 and ISO 11601:2008, and feasible solutions to design a mobile manipulator for automatically evaluating the quality or, more specifically, power of fire extinguishers. In addition, a part of the mechanical design is also discussed.Comment: 10 pages, 8 figures, the 7th International Conference on Advanced Engineering, Theory and Application