EarthN: A new Earth System Nitrogen Model

The amount of nitrogen in the atmosphere, oceans, crust, and mantle have important ramifications for Earth's biologic and geologic history. Despite this importance, the history and cycling of nitrogen in the Earth system is poorly constrained over time. For example, various models and proxies contrastingly support atmospheric mass stasis, net outgassing, or net ingassing over time. In addition, the amount available to and processing of nitrogen by organisms is intricately linked with and provides feedbacks on oxygen and nutrient cycles. To investigate the Earth system nitrogen cycle over geologic history, we have constructed a new nitrogen cycle model: EarthN. This model is driven by mantle cooling, links biologic nitrogen cycling to phosphate and oxygen, and incorporates geologic and biologic fluxes. Model output is consistent with large (2-4x) changes in atmospheric mass over time, typically indicating atmospheric drawdown and nitrogen sequestration into the mantle and continental crust. Critical controls on nitrogen distribution include mantle cooling history, weathering, and the total Bulk Silicate Earth+atmosphere nitrogen budget. Linking the nitrogen cycle to phosphorous and oxygen levels, instead of carbon as has been previously done, provides new and more dynamic insight into the history of nitrogen on the planet.Comment: 36 pages, 12 figure

VerdictDB: Universalizing Approximate Query Processing

Despite 25 years of research in academia, approximate query processing (AQP) has had little industrial adoption. One of the major causes of this slow adoption is the reluctance of traditional vendors to make radical changes to their legacy codebases, and the preoccupation of newer vendors (e.g., SQL-on-Hadoop products) with implementing standard features. Additionally, the few AQP engines that are available are each tied to a specific platform and require users to completely abandon their existing databases---an unrealistic expectation given the infancy of the AQP technology. Therefore, we argue that a universal solution is needed: a database-agnostic approximation engine that will widen the reach of this emerging technology across various platforms. Our proposal, called VerdictDB, uses a middleware architecture that requires no changes to the backend database, and thus, can work with all off-the-shelf engines. Operating at the driver-level, VerdictDB intercepts analytical queries issued to the database and rewrites them into another query that, if executed by any standard relational engine, will yield sufficient information for computing an approximate answer. VerdictDB uses the returned result set to compute an approximate answer and error estimates, which are then passed on to the user or application. However, lack of access to the query execution layer introduces significant challenges in terms of generality, correctness, and efficiency. This paper shows how VerdictDB overcomes these challenges and delivers up to 171$\times$ speedup (18.45$\times$ on average) for a variety of existing engines, such as Impala, Spark SQL, and Amazon Redshift, while incurring less than 2.6% relative error. VerdictDB is open-sourced under Apache License.Comment: Extended technical report of the paper that appeared in Proceedings of the 2018 International Conference on Management of Data, pp. 1461-1476. ACM, 201

Long Duration Performance of High Temperature Irradiation Resistant Thermocouples

Many advanced nuclear reactor designs require new fuel, cladding, and structural materials. Data are needed to characterize the performance of these new materials in high temperature, radiation conditions. However, traditional methods for measuring temperature inpile degrade at temperatures above 1100 ºC. To address this instrumentation need, the Idaho National Laboratory (INL) developed and evaluated the performance of a high temperature irradiation-resistant thermocouple that contains alloys of molybdenum and niobium. To verify the performance of INL’s recommended thermocouple design, a series of high temperature (from 1200 to 1800 ºC) long duration (up to six months) tests has been initiated. This paper summarizes results from the tests that have been completed. Data are presented from 4000 hour tests conducted at 1200 and 1400 ºC that demonstrate the stability of this thermocouple (less than 2% drift). In addition, post test metallographic examinations are discussed which confirm the compatibility of thermocouple materials throughout these long duration, high temperature tests

Evaluation of Specialized Thermocouples for High-Temperature In-Pile Testing

Many advanced nuclear reactor designs require new fuel, cladding, and structural materials. Data are needed to characterize the performance of these new materials in high temperature, oxidizing, and radiation conditions. To obtain this data, robust instrumentation is needed that can survive proposed test conditions. Standard thermocuoples for measuring temperature in-pile degrade at temperatures above 1100 ºC. Hence, INL initiated a project to develop specialized thermocouples for high temperature in-pile applications. Results from efforts to develop, fabricate, and evaluate specialized high-temperature thermocouples for in-pile applications suggest that several material combinations are viable. Tests show that several low neutron cross-section candidate materials are resistant to material interactions and remain ductile at high temperatures. In addition, results indicate that the thermoelectric response is singlevalued and repeatable with acceptable resolution for the candidate thermoelements considered. The final selection of the thermocouple materials will depend on the desired peak temperature and accuracy requirements. If thermocouples are needed that measure temperatures at 1600 ºC or higher, the doped Mo / Nb-1%Zr and Mo-1.6% Nb / Nb-1%Zr thermoelement wire combinations are recommended with HfO2 insulation, and a Nb-1%Zr sheath. Additional evaluations are underway to characterize the performance of this proposed thermocouple design. INL has worked to optimize this thermocouple’s stability. With appropriate heat treatment and fabrication approaches, results indicate that the effects of thermal cycling on the calibration of the proposed thermocouple design can be minimized. INL has initiated a series of high temperature (from 1200 to 1800 ºC) long duration (up to six months) tests. Initial results indicate the INL-developed thermocouple’s termoelectric response is stable with less than 15 ºC drift observed in over 3500 hours of the planned 4000 hours of tests at 1200 ºC. In comparison, commercially-available Type K and N thermocouples included in these 1200 ºC tests have experienced drifts up to of over100 ºC

Viability of Pushrod Dilatometry Techniques for High Temperature In-Pile Measurements

To evaluate the performance of new fuel, cladding, and structural materials for use in advanced and existing nuclear reactors, robust instrumentation is needed. Changes in material deformation are typically evaluated out-of-pile, where properties of materials are measured after samples were irradiated for a specified length of time. To address this problem, a series of tests were performed to examine the viability of using pushrod dilatometer techniques for in-pile instrumentation to measure deformation. The tests were performed in three phases. First, familiarity was gained in the use and accuracy of this system by testing samples with well defined thermal elongation characteristics. Second, high temperature data for steels, specifically SA533 Grade B, Class 1 (SA533B1) Low Alloy Steel and Stainless Steel 304 (SS304), found in Light Water Reactor (LWR) vessels, were aquired. Finally, data were obtained from a short pushrod in a horizontal geometry to data obtained from a longer pushrod in a vertical geometry, the configuration likely to be used for in-situ measurements. Results of testing show that previously accepted data for the structural steels tested, SA533B1 and SS304, are inaccurate at high temperatures (above 500 oC) due to extrpolation of high temperature data. This is especially true for SA533B1, as previous data do not account for the phase transformation of the material between 730 oC and 830 oC. Also, comparison of results for horizontal and vertical configurations show a maximum percent difference of 2.02% for high temperature data

Enhancements to High Temperature In-Pile Thermocouple Performance

A joint University of Idaho (UI) and Idaho National Laboratory (INL) University Nuclear Research Initiative (UNERI) was to initiated to extend initial INL efforts to develop doped molybdenum/niobium alloy High Temperature Irradiation Resistant Thermocouples (HTIR-TCs). The overall objective of this UNERI was to develop recommendations for an optimized thermocouple design for high temperature, long duration, in-pile testing by expanding upon results from initial INL efforts. Tasks to quantify the impact of candidate enhancements, such as alternate alloys, alternate geometries, and alternate thermocouple fabrication techniques, on thermocouple performance were completed at INL's High Temperature Test Laboratory (HTTL), a state of the art facility equipped with specialized equipment and trained staff in the area of high temperature instrumentation development and evaluation. Key results of these evaluations, which are documented in this report, are as follows. The doped molybdenum and Nb-1%Zr, which were proposed in the initial INL HTIR-TC design, were found to retain ductility better than the developmental molybdenum-low niobium alloys and the niobium-low molybdenum alloys evaluated. Hence, the performance and lower cost of the commercially available KW-Mo makes a thermocouple containing KW-Mo and Nb-1%Zr the best option at this time. HTIR-TCs containing larger diameter wires offer the potential to increase HTIR-TC stability and reliability at higher temperatures. HTIR-TC heat treatment temperatures and times should be limited to not more than 100 C above the proposed operating temperatures and to durations of at least 4 to 5 hours. Preliminary investigations suggest that the performance of swaged and loose assembly HTIR-TC designs is similar. However, the swaged designs are less expensive and easier to construct. In addition to optimizing HTIR-TC performance, This UNERI project provided unique opportunities to several University of Idaho students, allowing them to become familiar with the techniques and equipment used for specialized high temperature instrumentation fabrication and evaluation and to author/coauthor several key conference papers and journal articles

2500-Hour High Temperature Solid-Oxide Electrolyzer Long Duration Test

The Idaho National Laboratory (INL) has been developing the concept of using solid oxide fuel cells as electrolyzers for large-scale, high-temperature (efficient), hydrogen production. This program is sponsored by the U.S. Department of Energy under the Nuclear Hydrogen Initiative. Utilizing a fuel cell as an electrolyzer introduces some inherent differences in cell operating conditions. In particular, the performance of fuel cells operated as electrolyzers degrades with time faster. This issue of electrolyzer cell and stack performance degradation over time has been identified as a major barrier to technology development. Consequently, the INL has been working together with Ceramatec, Inc. (Salt Lake City, Utah) to improve the long-term performance of high temperature electrolyzers. As part of this research partnership, the INL conducted a 2500 hour test of a Ceramatec designed and produced stack operated in the electrolysis mode. This report will provide a summary of experimental results for this long duration test

Developing core sets for persons following amputation based on the International Classification of Functioning, Disability and Health as a way to specify functioning

Amputation is a common late stage sequel of peripheral vascular disease and diabetes or a sequel of accidental trauma, civil unrest and landmines. The functional impairments affect many facets of life including but not limited to: Mobility; activities of daily living; body image and sexuality. Classification, measurement and comparison of the consequences of amputations has been impeded by the limited availability of internationally, multiculturally standardized instruments in the amputee setting. The introduction of the International Classification of Functioning, Disability and Health (ICF) by the World Health Assembly in May 2001 provides a globally accepted framework and classification system to describe, assess and compare function and disability. In order to facilitate the use of the ICF in everyday clinical practice and research, ICF core sets have been developed that focus on specific aspects of function typically associated with a particular disability. The objective of this paper is to outline the development process for the ICF core sets for persons following amputation. The ICF core sets are designed to translate the benefits of the ICF into clinical routine. The ICF core sets will be defined at a Consensus conference which will integrate evidence from preparatory studies, namely: (a) a systematic literature review regarding the outcome measures of clinical trails and observational studies, (b) semi-structured patient interviews, (c) international experts participating in an internet-based survey, and (d) cross-sectional, multi-center studies for clinical applicability. To validate the ICF core sets field-testing will follow. Invitation for participation: The development of ICF Core Sets is an inclusive and open process. Anyone who wishes to actively participate in this process is invited to do so

Approaching an investigation of multi-dimensional inequality through the lenses of variety in models of capitalism

After a synthetic presentation of the state of poverty and inequality in the world and the contradictions incurred by economic theory in this field after decades of globalization and in the midst of a persisting global crisis, in paragraphs 2. and 3. we outline the rational for our theoretical analysis, underlining two main aspects. First of all, in paragraph 2. we recall the reasons which makes inequality a multidimensional phenomenon, while in paragraph 3. we explore the reasons why the models of capitalism theory is relevant for studying multidimensional inequality. These paragraphs emphasise that inequality is a multidimensional and cumulative phenomenon and it should not be conceived only as the result of the processes of personal and functional distribution of income and wealth, which even by themselves are intrinsically multidimensional. The basic idea is that institutions, the cobweb of relations among them and their interaction with the economic structure define the model of capitalism which characterises a specific country and this, in turn, affects the level and the dynamics of inequality. This approach is consistent with the sociological approach by Rehbein and Souza (2014), based on the analytical framework developed by Pierre Bourdieu. In paragraph 4. we outline the rational for our empirical analysis, applying the notion of institutional complementarity and examining the relationship between institutional complementarity, models of capitalism and inequality. Besides, refining Amable’s analysis (2003), we provide empirical evidence on the relationship between inequality in income distribution and models of capitalism. Additionally, basing on cluster analysis, we identify six different models of capitalism in a sample of OECD countries, provide preliminary evidence on the different level of inequality which characterises each model and suggest that no evidence supports of the idea that a single model of capitalism is taking shape in this sphere in EU. In paragraph 5. we give some hints about issues in search for a new interpretation capable to fasten together the process of increasing inequality, the notion of symbolic violence and the models of capitalism theory. In the last paragraph we focus on conclusions useful for carrying on our research agenda