Designing electronic collaborative learning environments

Electronic collaborative learning environments for learning and working are in vogue. Designers design them according to their own constructivist interpretations of what collaborative learning is and what it should achieve. Educators employ them with different educational approaches and in diverse situations to achieve different ends. Students use them, sometimes very enthusiastically, but often in a perfunctory way. Finally, researchers study them and—as is usually the case when apples and oranges are compared—find no conclusive evidence as to whether or not they work, where they do or do not work, when they do or do not work and, most importantly, why, they do or do not work. This contribution presents an affordance framework for such collaborative learning environments; an interaction design procedure for designing, developing, and implementing them; and an educational affordance approach to the use of tasks in those environments. It also presents the results of three projects dealing with these three issues

Quality and methods of developing practice guidelines

BACKGROUND: It is not known whether there are differences in the quality and recommendations between evidence-based (EB) and consensus-based (CB) guidelines. We used breast cancer guidelines as a case study to assess for these differences. METHODS: Five different instruments to evaluate the quality of guidelines were identified by a literature search. We also searched MEDLINE and the Internet to locate 8 breast cancer guidelines. These guidelines were classified in three categories: evidence based, consensus based and consensus based with no explicit consideration of evidence (CB-EB). Each guideline was evaluated by three of the authors using each of the instruments. For each guideline we assessed the agreement among 14 decision points which were selected from the NCCN (National Cancer Comprehensive Network) guidelines algorithm. For each decision point we recorded the level of the quality of the information used to support it. A regression analysis was performed to assess if the percentage of high quality evidence used in the guidelines development was related to the overall quality of the guidelines. RESULTS: Three guidelines were classified as EB, three as CB-EB and two as CB. The EB guidelines scored better than CB, with the CB-EB scoring in the middle among all instruments for guidelines quality assessment. No major disagreement in recommendations was detected among the guidelines regardless of the method used for development, but the EB guidelines had a better agreement with the benchmark guideline for any decision point. When the source of evidence used to support decision were of high quality, we found a higher level of full agreement among the guidelines' recommendations. Up to 94% of variation in the quality score among guidelines could be explained by the quality of evidence used for guidelines development. CONCLUSION: EB guidelines have a better quality than CB guidelines and CB-EB guidelines. Explicit use of high quality evidence can lead to a better agreement among recommendations. However, no major disagreement among guidelines was noted regardless of the method for their development

Dust Devil Tracks

Dust devils that leave dark- or light-toned tracks are common on Mars and they can also be found on the Earth’s surface. Dust devil tracks (hereinafter DDTs) are ephemeral surface features with mostly sub-annual lifetimes. Regarding their size, DDT widths can range between ∼1 m and ∼1 km, depending on the diameter of dust devil that created the track, and DDT lengths range from a few tens of meters to several kilometers, limited by the duration and horizontal ground speed of dust devils. DDTs can be classified into three main types based on their morphology and albedo in contrast to their surroundings; all are found on both planets: (a) dark continuous DDTs, (b) dark cycloidal DDTs, and (c) bright DDTs. Dark continuous DDTs are the most common type on Mars. They are characterized by their relatively homogenous and continuous low albedo surface tracks. Based on terrestrial and martian in situ studies, these DDTs most likely form when surficial dust layers are removed to expose larger-grained substrate material (coarse sands of ≥500 μm in diameter). The exposure of larger-grained materials changes the photometric properties of the surface; hence leading to lower albedo tracks because grain size is photometrically inversely proportional to the surface reflectance. However, although not observed so far, compositional differences (i.e., color differences) might also lead to albedo contrasts when dust is removed to expose substrate materials with mineralogical differences. For dark continuous DDTs, albedo drop measurements are around 2.5 % in the wavelength range of 550–850 nm on Mars and around 0.5 % in the wavelength range from 300–1100 nm on Earth. The removal of an equivalent layer thickness around 1 μm is sufficient for the formation of visible dark continuous DDTs on Mars and Earth. The next type of DDTs, dark cycloidal DDTs, are characterized by their low albedo pattern of overlapping scallops. Terrestrial in situ studies imply that they are formed when sand-sized material that is eroded from the outer vortex area of a dust devil is redeposited in annular patterns in the central vortex region. This type of DDT can also be found in on Mars in orbital image data, and although in situ studies are lacking, terrestrial analog studies, laboratory work, and numerical modeling suggest they have the same formation mechanism as those on Earth. Finally, bright DDTs are characterized by their continuous track pattern and high albedo compared to their undisturbed surroundings. They are found on both planets, but to date they have only been analyzed in situ on Earth. Here, the destruction of aggregates of dust, silt and sand by dust devils leads to smooth surfaces in contrast to the undisturbed rough surfaces surrounding the track. The resulting change in photometric properties occurs because the smoother surfaces have a higher reflectance compared to the surrounding rough surface, leading to bright DDTs. On Mars, the destruction of surficial dust-aggregates may also lead to bright DDTs. However, higher reflective surfaces may be produced by other formation mechanisms, such as dust compaction by passing dust devils, as this may also cause changes in photometric properties. On Mars, DDTs in general are found at all elevations and on a global scale, except on the permanent polar caps. DDT maximum areal densities occur during spring and summer in both hemispheres produced by an increase in dust devil activity caused by maximum insolation. Regionally, dust devil densities vary spatially likely controlled by changes in dust cover thicknesses and substrate materials. This variability makes it difficult to infer dust devil activity from DDT frequencies. Furthermore, only a fraction of dust devils leave tracks. However, DDTs can be used as proxies for dust devil lifetimes and wind directions and speeds, and they can also be used to predict lander or rover solar panel clearing events. Overall, the high DDT frequency in many areas on Mars leads to drastic albedo changes that affect large-scale weather patterns

Clastic patterned ground in Lomonosov crater, Mars: examining fracture controlled formation mechanisms

The area surrounding Lomonosov crater on Mars has a high density of seemingly organised boulder patterns. These form seemingly sorted polygons and stripes within kilometre scale blockfields, patches of boulder strewn ground which are common across the Martian high latitudes. Several hypotheses have been suggested to explain the formation of clastic patterned ground on Mars. It has been proposed that these structures could have formed through freeze-thaw sorting, or conversely by the interaction of boulders with underlying fracture polygons. In this investigation a series of sites were examined to evaluate whether boulder patterns appear to be controlled by the distribution of underlying fractures and test the fracture control hypotheses for their formation. It was decided to focus on this suite of mechanisms as they are characterised by a clear morphological relationship, namely the presence of an underlying fracture network which can easily be evaluated over a large area. It was found that in the majority of examples at these sites did not exhibit fracture control. Although fractures were present at many sites there were very few sites where the fracture network appeared to be controlling the boulder distribution. In general these were not the sites with the best examples of organization, suggesting that the fracture control mechanisms are not the dominant geomorphic process organising the boulders in this area

Reliability and Validity of the Disability Assessment Structured Interview (DASI): A Tool for Assessing Functional Limitations in Claimants

Objective The aim of this study is to investigate the reliability and validity of the Disability Assessment Structured Interview (DASI). The DASI is a semi-structured interview for assessing long-term functional limitations concerning the work disability assessment of claimants. Methods A randomized controlled trial was conducted. Patients applying for a work-disability pension after 21 months of sick leave were independently interviewed and examined either by two physicians who had completed a DASI training period (n = 32) or by two physicians from a control group (n = 30) without any DASI training. Agreement percentages within both groups of physicians, eligibility for a disability benefit, and differences between the groups in terms of the scores given on the work-limitation items from the Functional Ability List (FAL) were measured to investigate reliability and concurrent validity. To determine the content validity, the insurance physicians who completed DASI training (n = 8) were asked to fill out a questionnaire concerning their opinion of the DASI. Additionally, patients filled out a questionnaire to measure their satisfaction as to the behavioral aspects of the physicians. Results The groups showed no important differences in agreement percentages (mean percentage about 80%) and eligibility for a disability benefit. In 9 out of 21 items the physicians of the control group indicated fewer work limitations compared to physicians using the DASI. All physicians agreed on the fact that the DASI was an acceptable tool in daily practice, one that provided a realistic picture of the patient and provided sufficient information to assess functional limitations. In addition, between the two groups, no differences were found as to the satisfaction of patients concerning the behavioral aspects of the physicians. Conclusion The DASI is a tool with a reasonable to good inter-rater reliability and content validity, and it appears to be acceptable to both patients and physicians. It did not improve inter-observer agreement beyond that of usual interview procedures used in the Netherlands. The DASI would seem to be a worthwhile tool for collecting self-reported information in order to assess functional limitations in claimants

Dental erosive wear and salivary flow rate in physically active young adults

Background Little attention has been directed towards identifying the relationship between physical exercise, dental erosive wear and salivary secretion. The study aimed i) to describe the prevalence and severity of dental erosive wear among a group of physically active young adults, ii) to describe the patterns of dietary consumption and lifestyle among these individuals and iii) to study possible effect of exercise on salivary flow rate. Methods Young members (age range 18-32 years) of a fitness-centre were invited to participate in the study. Inclusion criteria were healthy young adults training hard at least twice a week. A non-exercising comparison group was selected from an ongoing study among 18-year-olds. Two hundred and twenty participants accepted an intraoral examination and completed a questionnaire. Seventy of the exercising participants provided saliva samples. The examination was performed at the fitness-centre or at a dental clinic (comparison group), using tested erosive wear system (VEDE). Saliva sampling (unstimulated and stimulated) was performed before and after exercise. Occlusal surfaces of the first molars in both jaws and the labial and palatal surfaces of the upper incisors and canines were selected as index teeth. Results Dental erosive wear was registered in 64% of the exercising participants, more often in the older age group, and in 20% of the comparison group. Enamel lesions were most observed in the upper central incisors (33%); dentine lesions in lower first molar (27%). One fourth of the participants had erosive wear into dentine, significantly more in males than in females (p = 0.047). More participants with erosive wear had decreased salivary flow during exercise compared with the non-erosion group (p < 0.01). The stimulated salivary flow rate was in the lower rage (≤ 1 ml/min) among more than one third of the participants, and more erosive lesions were registered than in subjects with higher flow rates (p < 0.01). Conclusion The study showed that a high proportion of physically active young adults have erosive lesions and indicate that hard exercise and decreased stimulated salivary flow rate may be associated with such wear

Marine Biodiversity of Aotearoa New Zealand

The marine-biodiversity assessment of New Zealand (Aotearoa as known to Māori) is confined to the 200 nautical-mile boundary of the Exclusive Economic Zone, which, at 4.2 million km2, is one of the largest in the world. It spans 30° of latitude and includes a high diversity of seafloor relief, including a trench 10 km deep. Much of this region remains unexplored biologically, especially the 50% of the EEZ deeper than 2,000 m. Knowledge of the marine biota is based on more than 200 years of marine exploration in the region. The major oceanographic data repository is the National Institute of Water and Atmospheric Research (NIWA), which is involved in several Census of Marine Life field projects and is the location of the Southwestern Pacific Regional OBIS Node; NIWA is also data manager and custodian for fisheries research data owned by the Ministry of Fisheries. Related data sources cover alien species, environmental measures, and historical information. Museum collections in New Zealand hold more than 800,000 registered lots representing several million specimens. During the past decade, 220 taxonomic specialists (85 marine) from 18 countries have been engaged in a project to review New Zealand's entire biodiversity. The above-mentioned marine information sources, published literature, and reports were scrutinized to give the results summarized here for the first time (current to 2010), including data on endemism and invasive species. There are 17,135 living species in the EEZ. This diversity includes 4,315 known undescribed species in collections. Species diversity for the most intensively studied phylum-level taxa (Porifera, Cnidaria, Mollusca, Brachiopoda, Bryozoa, Kinorhyncha, Echinodermata, Chordata) is more or less equivalent to that in the ERMS (European Register of Marine Species) region, which is 5.5 times larger in area than the New Zealand EEZ. The implication is that, when all other New Zealand phyla are equally well studied, total marine diversity in the EEZ may be expected to equal that in the ERMS region. This equivalence invites testable hypotheses to explain it. There are 177 naturalized alien species in New Zealand coastal waters, mostly in ports and harbours. Marine-taxonomic expertise in New Zealand covers a broad number of taxa but is, proportionately, at or near its lowest level since the Second World War. Nevertheless, collections are well supported by funding and are continually added to. Threats and protection measures concerning New Zealand's marine biodiversity are commented on, along with potential and priorities for future research

Systematic review and meta-analysis of the efficacy of interleukin-1 receptor antagonist in animal models of stroke: an update

Interleukin-1 receptor antagonist (IL-1 RA) is an anti-inflammatory protein used clinically to treat rheumatoid arthritis and is considered a promising candidate therapy for stroke. Here, we sought to update the existing systematic review and meta-analysis of IL-1 RA in models of ischaemic stroke, published in 2009, to assess efficacy, the range of circumstances in which efficacy has been tested and whether the data appear to be confounded due to reported study quality and publication bias. We included 25 sources of data, 11 of which were additional to the original review. Overall, IL-1 RA reduced infarct volume by 36.2 % (95 % confidence interval 31.6–40.7, n = 76 comparisons from 1283 animals). Assessments for publication bias suggest 30 theoretically missing studies which reduce efficacy to 21.9 % (17.3–26.4). Efficacy was higher where IL-1 RA was administered directly into the ventricles rather than peripherally, and studies not reporting allocation concealment during the induction of ischaemia reported larger treatment effects. The preclinical data supporting IL-1 RA as a candidate therapy for ischaemic stroke have improved. The reporting of measures to reduce the risk of bias has improved substantially in this update, and studies now include the use of animals with relevant co-morbidities. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s12975-016-0489-z) contains supplementary material, which is available to authorized users

Cognitive and cognitive-motor interventions affecting physical functioning: A systematic review

Background Several types of cognitive or combined cognitive-motor intervention types that might influence physical functions have been proposed in the past: training of dual-tasking abilities, and improving cognitive function through behavioral interventions or the use of computer games. The objective of this systematic review was to examine the literature regarding the use of cognitive and cognitive-motor interventions to improve physical functioning in older adults or people with neurological impairments that are similar to cognitive impairments seen in aging. The aim was to identify potentially promising methods that might be used in future intervention type studies for older adults. Methods A systematic search was conducted for the Medline/Premedline, PsycINFO, CINAHL and EMBASE databases. The search was focused on older adults over the age of 65. To increase the number of articles for review, we also included those discussing adult patients with neurological impairments due to trauma, as these cognitive impairments are similar to those seen in the aging population. The search was restricted to English, German and French language literature without any limitation of publication date or restriction by study design. Cognitive or cognitive-motor interventions were defined as dual-tasking, virtual reality exercise, cognitive exercise, or a combination of these. Results 28 articles met our inclusion criteria. Three articles used an isolated cognitive rehabilitation intervention, seven articles used a dual-task intervention and 19 applied a computerized intervention. There is evidence to suggest that cognitive or motor-cognitive methods positively affects physical functioning, such as postural control, walking abilities and general functions of the upper and lower extremities, respectively. The majority of the included studies resulted in improvements of the assessed functional outcome measures. Conclusions The current evidence on the effectiveness of cognitive or motor-cognitive interventions to improve physical functioning in older adults or people with neurological impairments is limited. The heterogeneity of the studies published so far does not allow defining the training methodology with the greatest effectiveness. This review nevertheless provides important foundational information in order to encourage further development of novel cognitive or cognitive-motor interventions, preferably with a randomized control design. Future research that aims to examine the relation between improvements in cognitive skills and the translation to better performance on selected physical tasks should explicitly take the relation between the cognitive and physical skills into account.ISSN:1471-231