647 research outputs found
Effective elastic properties of randomly distributed void models for porous materials
This is the post-print version of the final paper published in International Journal of Mechanical Sciences. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.Many 2D analytical models are available for estimating the effective elastic properties of porous materials. Most of these models adopt circular voids of a uniform diameter in superlattice arrays, such as unit void or periodically positioned models. There are two principal issues in a realistic representation of porous materials: the random distribution of a statistically sufficiently large number of voids in the model, and the random distribution of the size and position of the voids. Numerical schemes such as the FEM or the BEM have also been presented to cater for regular patterned circular voids. However, due to the large number of elements needed to produce sufficient accuracy for the curved boundary of circular voids or modelling a statistically sufficient number of voids with a random distribution in both the void size and the position, no such model has yet been produced.
Modelling based on an FEM approach using a simplified approximation for void geometry is proposed here for the calculation of the effective elastic properties of porous solids. A plane strain model of a square geometry is adopted for a 2D array of voids. This simplified square shape allows a large number of voids to be simulated with a random distribution for both void sizes and their locations. The problem of anisotropy, which arises from the square shape, is discussed. It is verified that along the two principal directions (parallel to the sides of the square voids), the elastic properties remain the same as those predicted by using a circular void geometry. This square-shaped approximation, with its reduced requirement for FE analysis, has the potential to be extended to 3-dimensional modelling for a realistic simulation of engineering materials.University of Aberdee
The diffusion of IP telephony and vendors' commercialisation strategies
This is a post-peer-review, pre-copyedit version of an article published in the Journal of Information Technology. The definitive publisher-authenticated version is available at the link below.The Internet telephony (IP telephony) has been presented as a technology that can replace existing fixed-line services and disrupt the telecommunications industry by offering new low-priced services. This study investigates the diffusion of IP telephony in Denmark by focusing on vendorsâ commercialisation strategies. The theory of disruptive innovation is introduced to investigate vendorsâ perceptions about IP telephony and explore their strategies that affect the diffusion process in the residential market. The analysis is based on interview data collected from the key market players. The study's findings suggest that IP telephony is treated as a sustaining innovation that goes beyond the typical voice transmission and enables provision of advanced services such as video telephony
Long-range effects in granular avalanching
We introduce a model for granular flow in a one-dimensional rice pile that
incorporates rolling effects through a long-range rolling probability for the
individual rice grains proportional to , being the distance
traveled by a grain in a single topling event. The exponent controls the
average rolling distance. We have shown that the crossover from power law to
stretched exponential behaviors observed experimentally in the granular
dynamics of rice piles can be well described as a long-range effect resulting
from a change in the transport properties of individual grains. We showed that
stretched exponential avalanche distributions can be associated with a
long-range regime for where the average rolling distance grows as a
power law with the system size, while power law distributions are associated
with a short range regime for , where the average rolling distance is
independent of the system size.Comment: 5 pages, 3 figure
Propagators and WKB-exactness in the plane wave limit of AdSxS
Green functions for the scalar, spinor and vector fields in a plane wave
geometry arising as a Penrose limit of are obtained. The
Schwinger-DeWitt technique directly gives the results in the plane wave
background, which turns out to be WKB-exact. Therefore the structural
similarity with flat space results is unveiled. In addition, based on the local
character of the Penrose limit, it is claimed that for getting the correct
propagators in the limit one can rely on the first terms of the direct geodesic
contribution in the Schwinger-DeWitt expansion of the original propagators .
This is explicitly shown for the Einstein Static Universe, which has the same
Penrose limit as with equal radii, and for a number of other
illustrative cases.Comment: 18 pages, late
Logarithmic Corrections to Rotating Extremal Black Hole Entropy in Four and Five Dimensions
We compute logarithmic corrections to the entropy of rotating extremal black
holes using quantum entropy function i.e. Euclidean quantum gravity approach.
Our analysis includes five dimensional supersymmetric BMPV black holes in type
IIB string theory on T^5 and K3 x S^1 as well as in the five dimensional CHL
models, and also non-supersymmetric extremal Kerr black hole and slowly
rotating extremal Kerr-Newmann black holes in four dimensions. For BMPV black
holes our results are in perfect agreement with the microscopic results derived
from string theory. In particular we reproduce correctly the dependence of the
logarithmic corrections on the number of U(1) gauge fields in the theory, and
on the angular momentum carried by the black hole in different scaling limits.
We also explain the shortcomings of the Cardy limit in explaining the
logarithmic corrections in the limit in which the (super)gravity description of
these black holes becomes a valid approximation. For non-supersymmetric
extremal black holes, e.g. for the extremal Kerr black hole in four dimensions,
our result provides a stringent testing ground for any microscopic explanation
of the black hole entropy, e.g. Kerr/CFT correspondence.Comment: LaTeX file, 50 pages; v2: added extensive discussion on the relation
between boundary condition and choice of ensemble, modified analysis for
slowly rotating black holes, all results remain unchanged, typos corrected;
v3: minor additions and correction
Robust Henderson III estimators of variance components in the nested error model
Common methods for estimating variance components in Linear Mixed Models include Maximum Likelihood (ML) and Restricted Maximum Likelihood (REML). These methods are based on the strong assumption of multivariate normal distribution and it is well know that they are very sensitive to outlying observations with respect to any of the random components. Several robust altematives of these methods have been proposed (e.g. Fellner 1986, Richardson and Welsh 1995). In this work we present several robust alternatives based on the Henderson method III which do not rely on the normality assumption and provide explicit solutions for the variance components estimators. These estimators can later be used to derive robust estimators of regression coefficients. Finally, we describe an application of this procedure to small area estimation, in which the main target is the estimation of the means of areas or domains when the within-area sample sizes are small
Advanced interface models for metal forming simulations
Friction and heat transfer in metal forming simulations are usually restricted by software to be interface constants, a situation not reflected by the mechanics of real manufacturing processes. A better simulation approach is to use a micromechanics based method to estimate friction and heat transfer as evolutionary phenomenon. This paper presents a friction and heat transfer module for hot forging simulations. The friction model is based on a lubricant film thickness calculation using the Reynolds equation, and a calculation of the fractional contact area based on asperity flattening and roughening. Friction is then portioned between asperity and lubricant contacts. Heat transfer coefficients are calculated using a new model for heat conduction through asperity contact patches and lubricant that takes into account the restriction to heat flow at the contacts. The program is implemented as a user routine in a popular commercially available finite element code, DEFORM 2D.Schmid, SR.; Liu, J.; SellĂ©s CantĂł, MĂ.; Pasang, T. (2013). Advanced interface models for metal forming simulations. Computational Materials Science. 79:763-771. doi:10.1016/j.commatsci.2013.07.025S7637717
Effects of Processing Residual Stresses on Fatigue Crack Growth Behavior of Structural Materials: Experimental Approaches and Microstructural Mechanisms
Fatigue crack growth mechanisms of long cracks through fields with low and high residual stresses were investigated for a common structural aluminum alloy, 6061-T61. Bulk processing residual stresses were introduced in the material by quenching during heat treatment. Compact tension (CT) specimens were fatigue crack growth (FCG) tested at varying stress ratios to capture the closure and Kmax effects. The changes in fatigue crack growth mechanisms at the microstructural scale are correlated to closure, stress ratio, and plasticity, which are all dependent on residual stress. A dual-parameter ÎK-Kmax approach, which includes corrections for crack closure and residual stresses, is used uniquely to connect fatigue crack growth mechanisms at the microstructural scale with changes in crack growth rates at various stress ratios for low- and high-residual-stress conditions. The methods and tools proposed in this study can be used to optimize existing materials and processes as well as to develop new materials and processes for FCG limited structural applications
Standard Model Matrix Elements for Neutral B-Meson Mixing and Associated Decay Constants
We present results of quenched lattice calculations of the matrix elements
relevant for B_d-\bar B_d and B_s-\bar B_s mixing in the Standard Model.
Results for the corresponding SU(3)-breaking ratios, which can be used to
constrain or determine |V_{td}|, are also given. The calculations are performed
at two values of the lattice spacing, corresponding to \beta = 6.0 and \beta =
6.2, with quarks described by a mean-field-improved Sheikholeslami-Wohlert
action. As a by-product, we obtain the leptonic decay constants of B and D
mesons. We also present matrix elements relevant for D^0-\bar D^0 mixing. Our
results are summarized in the Introduction.Comment: 27 pages (RevTeX), 26 figures, version published in Phys. Rev. D:
improved estimate of the systematic error associated with the uncertainty on
the strange quark mass and other small improvements to analysis (results
change only slightly); correction of typos and minor changes to text; RevTeX
formattin
Asteroseismology of red giants & galactic archaeology
Red-giant stars are low- to intermediate-mass (~M)
stars that have exhausted hydrogen in the core. These extended, cool and hence
red stars are key targets for stellar evolution studies as well as galactic
studies for several reasons: a) many stars go through a red-giant phase; b) red
giants are intrinsically bright; c) large stellar internal structure changes as
well as changes in surface chemical abundances take place over relatively short
time; d) red-giant stars exhibit global intrinsic oscillations. Due to their
large number and intrinsic brightness it is possible to observe many of these
stars up to large distances. Furthermore, the global intrinsic oscillations
provide a means to discern red-giant stars in the pre-helium core burning from
the ones in the helium core burning phase and provide an estimate of stellar
ages, a key ingredient for galactic studies. In this lecture I will first
discuss some physical phenomena that play a role in red-giant stars and several
phases of red-giant evolution. Then, I will provide some details about
asteroseismology -- the study of the internal structure of stars through their
intrinsic oscillations -- of red-giant stars. I will conclude by discussing
galactic archaeology -- the study of the formation and evolution of the Milky
Way by reconstructing its past from its current constituents -- and the role
red-giant stars can play in that.Comment: Lecture presented at the IVth Azores International Advanced School in
Space Sciences on "Asteroseismology and Exoplanets: Listening to the Stars
and Searching for New Worlds" (arXiv:1709.00645), which took place in Horta,
Azores Islands, Portugal in July 201
- âŠ