Measurement of Gilbert damping parameters in nanoscale CPP-GMR spin-valves

In-situ, device level measurement of thermal mag-noise spectral linewidths in 60nm diameter CPP-GMR spin-valve stacks of IrMn/ref/Cu/free, with reference and free layer of similar CoFe/CoFeGe alloy, are used to simultaneously determine the intrinsic Gilbert damping for both magnetic layers. It is shown that careful alignment at a "magic-angle" between free and reference layer static equilibrium magnetization can allow direct measurement of the broadband intrinsic thermal spectra in the virtual absence of spin-torque effects which otherwise grossly distort the spectral line shapes and require linewidth extrapolations to zero current (which are nonetheless also shown to agree well with the direct method). The experimental magic-angle spectra are shown to be in good qualitative and quantitative agreement with both macrospin calculations and micromagnetic eigenmode analysis. Despite similar composition and thickness, it is repeatedly found that the IrMn exchange pinned reference layer has ten times larger intrinsic Gilbert damping (alpha ~ 0.1) than that of the free-layer (alpha ~ 0.01). It is argued that the large reference layer damping results from strong, off -resonant coupling to to lossy modes of an IrMn/ref couple, rather than commonly invoked two-magnon processes.Comment: 11 pages (2-column format), 12 figures. This work was presented at the 2010 Joint MMM-Intermag Conference (Washington, DC) as paper AB-01 (invited

Insights into ultrafast demagnetization in pseudo-gap half metals

Interest in femtosecond demagnetization experiments was sparked by Bigot's discovery in 1995. These experiments unveil the elementary mechanisms coupling the electrons' temperature to their spin order. Even though first quantitative models describing ultrafast demagnetization have just been published within the past year, new calculations also suggest alternative mechanisms. Simultaneously, the application of fast demagnetization experiments has been demonstrated to provide key insight into technologically important systems such as high spin polarization metals, and consequently there is broad interest in further understanding the physics of these phenomena. To gain new and relevant insights, we perform ultrafast optical pump-probe experiments to characterize the demagnetization processes of highly spin-polarized magnetic thin films on a femtosecond time scale. Previous studies have suggested shifting the Fermi energy into the center of the gap by tuning the number of electrons and thereby to study its influence on spin-flip processes. Here we show that choosing isoelectronic Heusler compounds (Co2MnSi, Co2MnGe and Co2FeAl) allows us to vary the degree of spin polarization between 60% and 86%. We explain this behavior by considering the robustness of the gap against structural disorder. Moreover, we observe that Co-Fe-based pseudo gap materials, such as partially ordered Co-Fe-Ge alloys and also the well-known Co-Fe-B alloys, can reach similar values of the spin polarization. By using the unique features of these metals we vary the number of possible spin-flip channels, which allows us to pinpoint and control the half metals electronic structure and its influence onto the elementary mechanisms of ultrafast demagnetization.Comment: 17 pages, 4 figures, plus Supplementary Informatio

Pushmepullyou: An efficient micro-swimmer

The swimming of a pair of spherical bladders that change their volumes and mutual distance is efficient at low Reynolds numbers and is superior to other models of artificial swimmers. The change of shape resembles the wriggling motion known as {\it metaboly} of certain protozoa.Comment: Minor rephrasing and changes in style; short explanations adde

Swimming in circles: Motion of bacteria near solid boundaries

Near a solid boundary, E. coli swims in clockwise circular motion. We provide a hydrodynamic model for this behavior. We show that circular trajectories are natural consequences of force-free and torque-free swimming, and the hydrodynamic interactions with the boundary, which also leads to a hydrodynamic trapping of the cells close to the surface. We compare the results of the model with experimental data and obtain reasonable agreement. In particular, we show that the radius of curvature of the trajectory increases with the length of the bacterium body.Comment: Also available at http://people.deas.harvard.edu/~lauga

Effect of sink layer thickness on damping in CoMnGe (5 nm) / Ag (6 nm) / NiFe (x nm) spin valves

Poster presented at Magnetism 4 – 5 April 2016, Sheffield.In spin valve structures the damping of a ferromagnetic layer driven at resonance can be modified by the transfer of spin angular momentum into a ‘sink’ ferromagnetic layer. This effect, known as spin pumping, is interface dominated and expected to increase with increasing sink layer thickness up to a saturation absorption depth, previously reported to be 1.2 nm regardless of the sink layer’s composition [1]. Using vector network analyser ferromagnetic resonance (VNA-FMR), we have studied the variation in damping as a function of sink layer thickness in a series of CoMnGe (5 nm) / Ag (6 nm) / NiFe (x nm) spin valves. These measurements show only small variations in the CoMnGe Gilbert damping parameter for x ≤ 1.8 nm, although damping is observed to increase at x = 0.3 and 0.6 nm. Element-resolved x-ray detected ferromagnetic resonance (XFMR) [2] measurements confirm spin transfer torque due to spin pumping as the origin of the damping for x = 1.5 and 1.8 nm, with both thicknesses having the same effective spin mixing conductance, supporting the findings of Ghosh et al [1]. For thicker sink layers the source and sink FMR fields are seen to coincide, hampering the identification of spin pumping. [1] A Ghosh, et al. Physical Review Letters 109, 127202 (2012) [2] M Marcham, et al. Physical Review B 87, 180403 (2013)We thank the Advanced Light Source for access to beamlines 4.0.2 and 6.3.1 (ALS-06433, ALS-07116). The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.We thank Diamond Light Source for access to beamlines I06 and I10 (SI8782, SI11585, SI13063) that contributed to the results presented here.This work was supported by the Engineering and Physical Sciences Research Council [grant number EP/J018767/1]

Search for Sterile Neutrinos Mixing with Muon Neutrinos in MINOS

We report results of a search for oscillations involving a light sterile neutrino over distances of 1.04 and 735 km in a nu(mu)-dominated beam with a peak energy of 3 GeV. The data, from an exposure of 10.56 x 10(20) protons on target, are analyzed using a phenomenological model with one sterile neutrino. We constrain the mixing parameters theta(24) and Delta m(41)(2) and set limits on parameters of the four-dimensional Pontecorvo-Maki-Nakagawa-Sakata matrix, vertical bar U-mu 4 vertical bar(2) and vertical bar U-tau 4 vertical bar(2), under the assumption that mixing between nu(e) and nu(s) is negligible (vertical bar U-e4 vertical bar(2) = 0). No evidence for nu(mu) -\u3e nu(s) transitions is found and we set a world-leading limit on theta(24) for values of Delta m(41)(2) less than or similar to 1 eV(2)