Full Scale Proton Beam Impact Testing of new CERN Collimators and Validation of a Numerical Approach for Future Operation

New collimators are being produced at CERN in the framework of a large particle accelerator upgrade project to protect beam lines against stray particles. Their movable jaws hold low density absorbers with tight geometric requirements, while being able to withstand direct proton beam impacts. Such events induce considerable thermo-mechanical loads, leading to complex structural responses, which make the numerical analysis challenging. Hence, an experiment has been developed to validate the jaw design under representative conditions and to acquire online results to enhance the numerical models. Two jaws have been impacted by high-intensity proton beams in a dedicated facility at CERN and have recreated the worst possible scenario in future operation. The analysis of online results coupled to post-irradiation examinations have demonstrated that the jaw response remains in the elastic domain. However, they have also highlighted how sensitive the jaw geometry is to its mounting support inside the collimator. Proton beam impacts, as well as handling activities, may alter the jaw flatness tolerance value by $\pm$ 70 ${\mu}$m, whereas the flatness tolerance requirement is 200 ${\mu}$m. In spite of having validated the jaw design for this application, the study points out numerical limitations caused by the difficulties in describing complex geometries and boundary conditions with such unprecedented requirements.Comment: 22 pages, 17 figures, Prepared for submission to JINS

Structural and magnetic properties of Co2MnSi thin films

Co2MnSi (CMS) films of different thicknesses (20, 50, and 100 nm) were grown by radio frequency (RF) sputtering on a-plane sapphire substrates. Our X-rays diffraction (XRD) study shows that, in all the samples, the cubic 〈110〉 CMS axis is normal to the substrate and that six well defined preferential in-plane orientations are present. Static and dynamic magnetic properties were investigated using vibrating sample magnetometry (VSM) and microstrip line ferromagnetic resonance (MS-FMR), respectively. From the resonance measurements versus the direction and the amplitude of an applied magnetic field, most of the magnetic parameters are derived, i.e.: the magnetization, the gyromagnetic factor, the exchange stiffness coefficient, and the magnetic anisotropy terms. The in-plane anisotropy results from the superposition of two terms showing a twofold and a fourfold symmetry, respectively. The observed behavior of the hysteresis loops is in agreement with this complex form of the in-plane anisotropy.International audienceCo2MnSi (CMS) films of different thicknesses (20, 50, and 100 nm) were grown by radio frequency (RF) sputtering on a-plane sapphire substrates. Our X-rays diffraction (XRD) study shows that, in all the samples, the cubic 〈110〉 CMS axis is normal to the substrate and that six well defined preferential in-plane orientations are present. Static and dynamic magnetic properties were investigated using vibrating sample magnetometry (VSM) and microstrip line ferromagnetic resonance (MS-FMR), respectively. From the resonance measurements versus the direction and the amplitude of an applied magnetic field, most of the magnetic parameters are derived, i.e.: the magnetization, the gyromagnetic factor, the exchange stiffness coefficient, and the magnetic anisotropy terms. The in-plane anisotropy results from the superposition of two terms showing a twofold and a fourfold symmetry, respectively. The observed behavior of the hysteresis loops is in agreement with this complex form of the in-plane anisotropy

Second T = 3/2 state in 9^9B and the isobaric multiplet mass equation

Recent high-precision mass measurements and shell model calculations~[Phys. Rev. Lett. {\bf 108}, 212501 (2012)] have challenged a longstanding explanation for the requirement of a cubic isobaric multiplet mass equation for the lowest $A = 9$ isospin quartet. The conclusions relied upon the choice of the excitation energy for the second $T = 3/2$ state in $^9$B, which had two conflicting measurements prior to this work. We remeasured the energy of the state using the $^9{\rm Be}(^3{\rm He},t)$ reaction and significantly disagree with the most recent measurement. Our result supports the contention that continuum coupling in the most proton-rich member of the quartet is not the predominant reason for the large cubic term required for $A = 9$ nuclei

Patterns in the Fermion Mixing Matrix, a bottom-up approach

We first obtain the most general and compact parametrization of the unitary transformation diagonalizing any 3 by 3 hermitian matrix H, as a function of its elements and eigenvalues. We then study a special class of fermion mass matrices, defined by the requirement that all of the diagonalizing unitary matrices (in the up, down, charged lepton and neutrino sectors) contain at least one mixing angle much smaller than the other two. Our new parametrization allows us to quickly extract information on the patterns and predictions emerging from this scheme. In particular we find that the phase difference between two elements of the two mass matrices (of the sector in question) controls the generic size of one of the observable fermion mixing angles: i.e. just fixing that particular phase difference will "predict" the generic value of one of the mixing angles, irrespective of the value of anything else.Comment: 29 pages, 3 figures, references added, to appear in PR

Longitudinal changes in functional connectivity of cortico-basal ganglia networks in manifests and premanifest huntington's disease

Huntington's disease (HD) is a genetic neurological disorder resulting in cognitive and motor impairments. We evaluated the longitudinal changes of functional connectivity in sensorimotor, associative and limbic cortico-basal ganglia networks. We acquired structural MRI and resting-state fMRI in three visits one year apart, in 18 adult HD patients, 24 asymptomatic mutation carriers (preHD) and 18 gender- and age-matched healthy volunteers from the TRACK-HD study. We inferred topological changes in functional connectivity between 182 regions within cortico-basal ganglia networks using graph theory measures. We found significant differences for global graph theory measures in HD but not in preHD. The average shortest path length (L) decreased, which indicated a change toward the random network topology. HD patients also demonstrated increases in degree k, reduced betweeness centrality bc and reduced clustering C. Changes predominated in the sensorimotor network for bc and C and were observed in all circuits for k. Hubs were reduced in preHD and no longer detectable in HD in the sensorimotor and associative networks. Changes in graph theory metrics (L, k, C and bc) correlated with four clinical and cognitive measures (symbol digit modalities test, Stroop, Burden and UHDRS). There were no changes in graph theory metrics across sessions, which suggests that these measures are not reliable biomarkers of longitudinal changes in HD. preHD is characterized by progressive decreasing hub organization, and these changes aggravate in HD patients with changes in local metrics. HD is characterized by progressive changes in global network interconnectivity, whose network topology becomes more random over time. Hum Brain Mapp, 2016. © 2016 Wiley Periodicals, Inc

Challenges in QCD matter physics --The scientific programme of the Compressed Baryonic Matter experiment at FAIR

Substantial experimental and theoretical efforts worldwide are devoted to explore the phase diagram of strongly interacting matter. At LHC and top RHIC energies, QCD matter is studied at very high temperatures and nearly vanishing net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was created at experiments at RHIC and LHC. The transition from the QGP back to the hadron gas is found to be a smooth cross over. For larger net-baryon densities and lower temperatures, it is expected that the QCD phase diagram exhibits a rich structure, such as a first-order phase transition between hadronic and partonic matter which terminates in a critical point, or exotic phases like quarkyonic matter. The discovery of these landmarks would be a breakthrough in our understanding of the strong interaction and is therefore in the focus of various high-energy heavy-ion research programs. The Compressed Baryonic Matter (CBM) experiment at FAIR will play a unique role in the exploration of the QCD phase diagram in the region of high net-baryon densities, because it is designed to run at unprecedented interaction rates. High-rate operation is the key prerequisite for high-precision measurements of multi-differential observables and of rare diagnostic probes which are sensitive to the dense phase of the nuclear fireball. The goal of the CBM experiment at SIS100 (sNN= 2.7--4.9 GeV) is to discover fundamental properties of QCD matter: the phase structure at large baryon-chemical potentials (μB> 500 MeV), effects of chiral symmetry, and the equation of state at high density as it is expected to occur in the core of neutron stars. In this article, we review the motivation for and the physics programme of CBM, including activities before the start of data taking in 2024, in the context of the worldwide efforts to explore high-density QCD matter

Challenges in QCD matter physics - The Compressed Baryonic Matter experiment at FAIR

Substantial experimental and theoretical efforts worldwide are devoted to explore the phase diagram of strongly interacting matter. At LHC and top RHIC energies, QCD matter is studied at very high temperatures and nearly vanishing net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was created at experiments at RHIC and LHC. The transition from the QGP back to the hadron gas is found to be a smooth cross over. For larger net-baryon densities and lower temperatures, it is expected that the QCD phase diagram exhibits a rich structure, such as a first-order phase transition between hadronic and partonic matter which terminates in a critical point, or exotic phases like quarkyonic matter. The discovery of these landmarks would be a breakthrough in our understanding of the strong interaction and is therefore in the focus of various high-energy heavy-ion research programs. The Compressed Baryonic Matter (CBM) experiment at FAIR will play a unique role in the exploration of the QCD phase diagram in the region of high net-baryon densities, because it is designed to run at unprecedented interaction rates. High-rate operation is the key prerequisite for high-precision measurements of multi-differential observables and of rare diagnostic probes which are sensitive to the dense phase of the nuclear fireball. The goal of the CBM experiment at SIS100 (sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD matter: the phase structure at large baryon-chemical potentials (mu_B > 500 MeV), effects of chiral symmetry, and the equation-of-state at high density as it is expected to occur in the core of neutron stars. In this article, we review the motivation for and the physics programme of CBM, including activities before the start of data taking in 2022, in the context of the worldwide efforts to explore high-density QCD matter.Comment: 15 pages, 11 figures. Published in European Physical Journal

Study of the Biological Activities of the Seeds of the Plant Ceratonia Siliqua L. Recovered in the Bejaia Region

Background: Ceratonia siliqua is a plant that belongs to the Fabaceae family. It is frequently used in our culinary and medical traditions to fight cholesterol, acute diarrhea and digestive disorders. Methods: The hydrogen atom or electron donation abilities of the corresponding extracts and some pure compounds were measured from the bleaching of the purple-colored methanol solution of 2, 20-diphenylpicrylhydrazyl (DPPH), studying the anti-inflammatory effect by measuring the volume of the edema of the paw that has received carrageenan 1%. Antimicrobial activity in vitro was screened by using disc diffusion and micro-dilution methods. Results: The determination of the polyphenols of the methanolic extracts of the seeds reveals the richness of our extracts in polyphenols is 30 mg of gallic acid / g of extract. The aqueous and methanolic extract flavonoid assay shows that they contain high levels of flavonoids with contents of 07 and 10 mg equivalent of quercetin / g of extract respectively. The aqueous and methanolic extracts of Ceratonia siliqua seeds from the Bejaia region could bring the stable free radical 2.2 diphenyl-1-picrylhydrazyl (DPPH) to yellow-colored diphenylpicrylhydrazine with respective IC 50 values of 0.7 mg/ml and 0.2 mg/ml. They exhibit lower antioxidant activity than ascorbic acid (0.038 μg / ml). Determination of anti-inflammatory activity revealed that our aqueous and methanolic extracts of Ceratonia siliqua L seeds are able to reduce edema up to 81.89%. The methanoid extracts of Ceratonia siliqua L. seeds have a medium antibacterial action against bacteria: E. coli (13 mm), Staphylococcus aureus (12 mm) and Pseudomonas aeruginosa (12 mm). On the other hand, the aqueous extracts of the seeds of Ceratonia siliqua L have a weak antibacterial action against the same bacteria with a diameter of inhibition of 9 mm. However, the aqueous extracts of Ceratonia siliqua L seeds are endowed with a very important inhibitory action against candida albicans and it is similar to that of the antibiotic, antifungal Econazole (1%). Conclusion: According to the results observed, the two extracts of the seeds and pods have a potential anti-free radical and antioxidant measured compared to the standard antioxidant used. The results of the antimicrobial activity carried out in vitro on the 3 bacterial strains indicate that the two methanolic extracts of this plant have low antibacterial activity