Porous Low-Dielectric-Constant Material for Semiconductor Microelectronics

To provide high speed, low dynamic power dissipation, and low cross-talk noise for microelectronic circuits, low-dielectric-constant (low-k) materials are required as the inter- and intra-level dielectric (ILD) insulator of the back-end-of-line interconnects. Porous low-k materials have low-polarizability chemical compositions and the introducing porosity in the film. Integration of porous low-k materials into microelectronic circuits, however, poses a number of challenges because the composition and porosity affected the resistance to damage during integration processing and reduced the mechanical strength, thereby degrading the properties and reliability. These issues arising from porous low-k materials are the subject of the present chapter

Plasma Damage on Low-k Dielectric Materials

Low dielectric constant (low-k) materials as an interconnecting insulator in integrated circuits are essential for resistance-capacitance (RC) time delay reduction. Plasma technology is widely used for the fabrication of the interconnects, such as dielectric etching, resisting ashing or stripping, barrier metal deposition, and surface treatment. During these processes, low-k dielectric materials may be exposed to the plasma environments. The generated reactive species from the plasma react with the low-k dielectric materials. The reaction involves physical and chemical effects, causing degradations for low-k dielectric materials. This is called “plasma damage” on low-k dielectric materials. Therefore, this chapter is an attempt to provide an overview of plasma damage on the low-k dielectric materials

Copper Metal for Semiconductor Interconnects

Resistance-capacitance (RC) delay produced by the interconnects limits the speed of the integrated circuits from 0.25 mm technology node. Copper (Cu) had been used to replace aluminum (Al) as an interconnecting conductor in order to reduce the resistance. In this chapter, the deposition method of Cu films and the interconnect fabrication with Cu metallization are introduced. The resulting integration and reliability challenges are addressed as well

High Efficiency of Dye-Sensitized Solar Cells Based on Ruthenium and Metal-Free Dyes

The influence of using different concentrations of triazoloisoquinoline based small molecule as coadsorbent to modify the monolayer of a TiO2 semiconductor on the performance of a dye-sensitized solar cell is studied. The co-adsorbent significantly enhances the open-circuit photovoltage (), the short circuit photocurrent density () the solar energy conversion efficiency (). The co-adsorbent 4L is applied successfully to prepare an insulating molecular layer with N719 and achieve high energy conversion efficiency as high as 8.83% at 100 mW cm−2 and AM 1.5 at 1 to 0.25 (N719 : co-adsorbent) molar ratio. The resulting efficiency is about 6% higher than that of a nonadditive device. The result shows that the organic small molecule 4L (2-cyano-3-(5-(4-(3-oxo-[1,2,4]triazolo[3,4-a]isoquinoline-2(3H)-yl)phenyl)thiophene-2-yl)acrylic acid) is the promising candidates for improvement of the performance of dye-sensitized solar cell

On the Implications of Sense of Control over Bicycling : Design of a Physical Stamina-Aware Bike

Bicycling has become a mainstream activity among the environmental aware generation. Bicycling communities have gradually shown interests in quantitative data of the bicycling experiences such as road roughness, inclination, pollution, etc. Bikers utilize these data to infer the possible stamina cost and quality of surroundings. This supports them to make a better decision. This study assumes that fitness level indexed by stamina cost could enhance a biker's sense of control. The prototype in this paper was developed to provide stamina cost information, which is inferred from the terrain patterns of a biking route. In the system evaluation, participants took a positive attitude toward this prototype and approved the importance of stamina cost feedback. This paper also concluded several key issues about designing the stamina cost feedback system for bikers

Mozart K.448 listening decreased seizure recurrence and epileptiform discharges in children with first unprovoked seizures: a randomized controlled study

BACKGROUND: Increasing numbers of reports show the beneficial effects of listening to Mozart music in decreasing epileptiform discharges as well as seizure frequency in epileptic children. There has been no effective method to reduce seizure recurrence after the first unprovoked seizure until now. In this study, we investigated the effect of listening to Mozart K.448 in reducing the seizure recurrence rate in children with first unprovoked seizures. METHODS: Forty-eight children who experienced their first unprovoked seizure with epileptiform discharges were included in the study. They were randomly placed into treatment (n = 24) and control (n = 24) groups. Children in the treatment group listened to Mozart K.448 daily before bedtime for at least six months. Two patients in the treatment group were excluded from analysis due to discontinuation intervention. Finally, forty-six patients were analyzed. Most of these patients (89.1%) were idiopathic in etiology. Seizure recurrence rates and reduction of epileptiform discharges were compared. RESULTS: The average follow-up durations in the treatment and control groups were 18.6 ± 6.6 and 20.1 ± 5.1 months, respectively. The seizure recurrence rate was estimated to be significantly lower in the treatment group than the control group over 24 months (37.2% vs. 76.8%, p = 0.0109). Significant decreases in epileptiform discharges were also observed after 1, 2, and 6 months of listening to Mozart K.448 when compared with EEGs before listening to music. There were no significant differences in gender, mentality, seizure type, and etiology between the recurrence and non-recurrence groups. CONCLUSIONS: Although the case number was limited and control music was not performed in this study, the study revealed that listening to Mozart K.448 reduced the seizure recurrence rate and epileptiform discharges in children with first unprovoked seizures, especially of idiopathic etiology. We believe that Mozart K.448 could be a promising alternative treatment in patients with first unprovoked seizures and abnormal EEGs. Further large-scaled study should be conducted to confirm the effect. TRIAL REGISTRATION: NCT01892605, date: June-19-201

CoVR: A Large-Scale Force-Feedback Robotic Interface for Non-Deterministic Scenarios in VR

We present CoVR, a novel robotic interface providing strong kinesthetic feedback (100 N) in a room-scale VR arena. It consists of a physical column mounted on a 2D Cartesian ceiling robot (XY displacements) with the capacity of (1) resisting to body-scaled users' actions such as pushing or leaning; (2) acting on the users by pulling or transporting them as well as (3) carrying multiple potentially heavy objects (up to 80kg) that users can freely manipulate or make interact with each other. We describe its implementation and define a trajectory generation algorithm based on a novel user intention model to support non-deterministic scenarios, where the users are free to interact with any virtual object of interest with no regards to the scenarios' progress. A technical evaluation and a user study demonstrate the feasibility and usability of CoVR, as well as the relevance of whole-body interactions involving strong forces, such as being pulled through or transported.Comment: 10 pages (without references), 14 pages tota

Microarray meta-analysis database (M2DB): a uniformly pre-processed, quality controlled, and manually curated human clinical microarray database

<p>Abstract</p> <p>Background</p> <p>Over the past decade, gene expression microarray studies have greatly expanded our knowledge of genetic mechanisms of human diseases. Meta-analysis of substantial amounts of accumulated data, by integrating valuable information from multiple studies, is becoming more important in microarray research. However, collecting data of special interest from public microarray repositories often present major practical problems. Moreover, including low-quality data may significantly reduce meta-analysis efficiency.</p> <p>Results</p> <p>M²DB is a human curated microarray database designed for easy querying, based on clinical information and for interactive retrieval of either raw or uniformly pre-processed data, along with a set of quality-control metrics. The database contains more than 10,000 previously published Affymetrix GeneChip arrays, performed using human clinical specimens. M²DB allows online querying according to a flexible combination of five clinical annotations describing disease state and sampling location. These annotations were manually curated by controlled vocabularies, based on information obtained from GEO, ArrayExpress, and published papers. For array-based assessment control, the online query provides sets of QC metrics, generated using three available QC algorithms. Arrays with poor data quality can easily be excluded from the query interface. The query provides values from two algorithms for gene-based filtering, and raw data and three kinds of pre-processed data for downloading.</p> <p>Conclusion</p> <p>M²DB utilizes a user-friendly interface for QC parameters, sample clinical annotations, and data formats to help users obtain clinical metadata. This database provides a lower entry threshold and an integrated process of meta-analysis. We hope that this research will promote further evolution of microarray meta-analysis.</p