Microstructural properties and peritectic reactions in a binary Co–Sn alloy by means of scanning electron microscopy and atom probe tomography

Recent studies of lithium-ion batteries suggest that the use of binary CoSn alloys as anodes should provide an improvement over currently used anode materials. However, the implementation of CoSn alloys is challenging due to uncertainties regarding the phase transformations within this system. In order to understand these, we evaluate the compositions of different intermetallic compounds produced via the peritectic reactions, nucleate and grow within the microstructure of binary Sn − 25 at.% Co by employing atom probe tomography (APT). The stoichiometric ${\rm{CoSn}}$ phase, which is produced upon the cooling of the melt, is not only found as part of the peritectic solidification sequence but also as clusters within the pure Sn phase. The ${{\rm{CoSn}}}_{2}$ phase was found as a nano sized layer and is attributed to the peritectic reaction between the ${\rm{CoSn}}$ phase and the pure Sn phase. The production of the ${{\rm{CoSn}}}_{3}$ compound was enhanced by the phase transformation of the ${{\rm{CoSn}}}_{2}$ phase. Furthermore, ${{\rm{CoSn}}}_{3}$ clusters had formed in the pure Sn phase. A limited solubility within the pure Sn phase was also determined to be (0.6 ± 0.1) at.% Co

MoS₂ Thin Films for Photo-Voltaic Applications

The low dimensional chalcogenide materials with high band gap of ~1.8 eV, specially molybdenum di-sulfide (MoS2), have been brought much attention in the material science community for their usage as semiconducting materials to fabricate low scaled electronic devices with high throughput and reliability, this includes also photovoltaic applications. In this chapter, experimental data for MoS2 material towards developing the next generation of high-efficiency solar cells is presented, which includes fabrication of ~100 nm homogeneous thin film over silicon di-oxide (SiO2) by using radio frequency sputtering at 275 W at high vacuum~10−9 from commercial MoS2 99.9% purity target. The films were studied by means of scanning and transmission electron microscopy with energy disperse spectroscopy, grazing incident low angle x-ray scattering, Raman spectroscopy, atomic force microscopy, atom probe tomography, electrical transport using four-point probe resistivity measurement as well mechanical properties utilizing nano-indentation with continuous stiffness mode (CSM) approach. The experimental results indicate a vertical growth direction at (101)-MoS2 crystallites with stacking values of 7-laminates along the (002)-basal plane; principal Raman vibrations at E12g at 378 cm−1 and A1g at 407 cm−1. The hardness and elastic modulus values of H = 10.5 ± 0.1 GPa and E = 136 ± 2 GPa were estimated by CSM method from 0 to 90 nm of indenter penetration; as well transport measurements from −3.5 V to +3.5 V indicating linear Ohmic behavior

A Solve-RD ClinVar-based reanalysis of 1522 index cases from ERN-ITHACA reveals common pitfalls and misinterpretations in exome sequencing

Purpose Within the Solve-RD project (https://solve-rd.eu/), the European Reference Network for Intellectual disability, TeleHealth, Autism and Congenital Anomalies aimed to investigate whether a reanalysis of exomes from unsolved cases based on ClinVar annotations could establish additional diagnoses. We present the results of the “ClinVar low-hanging fruit” reanalysis, reasons for the failure of previous analyses, and lessons learned. Methods Data from the first 3576 exomes (1522 probands and 2054 relatives) collected from European Reference Network for Intellectual disability, TeleHealth, Autism and Congenital Anomalies was reanalyzed by the Solve-RD consortium by evaluating for the presence of single-nucleotide variant, and small insertions and deletions already reported as (likely) pathogenic in ClinVar. Variants were filtered according to frequency, genotype, and mode of inheritance and reinterpreted. Results We identified causal variants in 59 cases (3.9%), 50 of them also raised by other approaches and 9 leading to new diagnoses, highlighting interpretation challenges: variants in genes not known to be involved in human disease at the time of the first analysis, misleading genotypes, or variants undetected by local pipelines (variants in off-target regions, low quality filters, low allelic balance, or high frequency). Conclusion The “ClinVar low-hanging fruit” analysis represents an effective, fast, and easy approach to recover causal variants from exome sequencing data, herewith contributing to the reduction of the diagnostic deadlock

Synthesis and biological evaluation of analogs of the marine alkaloids granulatimide and isogranulatimide.

A series of pyrrolic analogs and two series of regioisomeric pyrazolic analogs of the marine alkaloids granulatimide and isogranulatimide were prepared. The synthesis of the two first ones was based on the condensation reaction of diversely 5-substituted 3-bromoindoles with pyrrole or pyrazole followed by addition of the intermediates on maleimide or dibromomaleimide, respectively, the so-obtained acyclic adducts being finally photocyclized to the desired analogs. Compounds of the last series were obtained by reacting different 5-substituted-indole-3-glyoxylates with N-Boc-pyrazole-3-acetamide and subsequent photochemical cyclization of the adducts. All the compounds were evaluated for their in vitro growth inhibitory properties toward eight cancer cell lines. Several compounds were also assayed for their ability to abrogate the G2-cell cycle checkpoint or to inhibit a panel of Ser/Thr kinases. Lastly, computer-assisted phase-contrast microscopy (quantitative videomicroscopy) revealed that the three most potent compounds (4a, 9a, 9e), with IC50 growth inhibitory concentrations ranging between 10 and 20 μM, displayed cytostatic, not cytotoxic, anticancer effects. © 2012 Elsevier Masson SAS. All rights reserved.SCOPUS: ar.jinfo:eu-repo/semantics/publishe

A mutation in the 3′-UTR of the HDAC6 gene abolishing the post-transcriptional regulation mediated by hsa-miR-433 is linked to a new form of dominant X-linked chondrodysplasia

International audienc

MoS2 Thin Films for Photo-Voltaic Applications

The low dimensional chalcogenide materials with high band gap of ~1.8 eV, specially molybdenum di-sulfide (MoS2), have been brought much attention in the material science community for their usage as semiconducting materials to fabricate low scaled electronic devices with high throughput and reliability, this includes also photovoltaic applications. In this chapter, experimental data for MoS2 material towards developing the next generation of high-efficiency solar cells is presented, which includes fabrication of ~100 nm homogeneous thin film over silicon di-oxide (SiO2) by using radio frequency sputtering at 275 W at high vacuum~10−9 from commercial MoS2 99.9% purity target. The films were studied by means of scanning and transmission electron microscopy with energy disperse spectroscopy, grazing incident low angle x-ray scattering, Raman spectroscopy, atomic force microscopy, atom probe tomography, electrical transport using four-point probe resistivity measurement as well mechanical properties utilizing nano-indentation with continuous stiffness mode (CSM) approach. The experimental results indicate a vertical growth direction at (101)-MoS2 crystallites with stacking values of 7-laminates along the (002)-basal plane; principal Raman vibrations at E12g at 378 cm−1 and A1g at 407 cm−1. The hardness and elastic modulus values of H = 10.5 ± 0.1 GPa and E = 136 ± 2 GPa were estimated by CSM method from 0 to 90 nm of indenter penetration; as well transport measurements from −3.5 V to +3.5 V indicating linear Ohmic behavior

Searching for secondary findings: considering actionability and preserving the right not to know

status: publishe

Searching for secondary findings: considering actionability and preserving the right not to know

International audienceNo abstract availabl