Finger dexterity in well-functioning cohort of office workers in Macau

Aim: The study aimed to describe the finger dexterity in office workers of an Asian population. Methods: One hundred twenty-seven right-handed office workers, aged 21–50 with a similar split of male and female, were recruited with finger dexterity measured by the O’Connor Finger Dexterity Test. The grip strength, tip and lateral pinch strength of both hands were also measured. Results: This study provided the percentile score of the O’Connor Finger Dexterity Test of both males and females in the Asian population. Raw scores of below 218 and 213 seconds in male and female participants respectively reach the 90th percentile, and above 237 and 235 seconds in male and female below the 10th percentile. Results showed no significant difference in local mean scores across different age groups, between male and female and with varying hours of working in typing, filing, and writing. A significant difference was only found in finger dexterity and years of working as office workers. No significant correlation was found between the finger dexterity with grip strength, tip and lateral pinch of the dominant right hand. The results were similar to the original normative score with similar work skills and demands. Conclusion: The mean scores could be used as a valid reference for local occupational therapists to evaluate the finger dexterity of office workers. However, caution has to be taken that conclusions drawn can be biased because of the relatively small sample size, and the results cannot be generalized to represent a wider Asian population

Comparison of two surgical techniques for reconstructing posterolateral corner of the knee: a cadaveric study evaluated by navigation system

Purpose: This study aimed to evaluate the immediate effect on knee kinematics by 2 different techniques of posterolateral corner (PLC) reconstruction. Methods: Five intact formalin-preserved cadaveric knees were used in this study. A navigation system was used to measure knee kinematics (posterior translation, varus angulation, and external rotation) after application of a constant force and torque to the tibia. Four different conditions of the knee were evaluated during the biomechanical test: intact knee and PLC-sectioned knee and PLC-reconstructed knee by the doublefemoral tunnel technique and singlefemoral tunnel technique. Results: Sectioning of the PLC structures resulted in significant increases in external rotation at 30° of flexion from 11.2° (SD, 2.6) to 24.6° (SD, 6.2), posterior translation at 30° of flexion from 3.4 mm (SD, 1.5) to 7.4 mm (SD, 3.8), and varus angulation at 0° of flexion from 2.3° (SD, 2.1) to 7.9° (SD, 5.1). Both reconstruction techniques significantly restored the varus stability. The external rotation and posterior translation at 30° of flexion after reconstruction with the doublefemoral tunnel technique were 10.2° (SD, 1.3) and 3.4° (SD, 2.7), respectively, which were significantly better than those of the singlefemoral tunnel technique. Conclusions: Both techniques of reconstruction showed improved stability compared with PLC-sectioned knees. The doublefemoral tunnel technique in PLC reconstruction showed better rotational stability and resistance to posterior translation than the singlefemoral tunnel technique without compromising varus stability. Clinical Relevance: PLC reconstruction by a doublefemoral tunnel technique achieves better rotational control and resistance to posterior translation

Astronomical X-Ray Optics Using Mono-Crystalline Silicon: High Resolution, Light Weight, and Low Cost

X-ray astronomy critically depends on X-ray optics. The capability of an X-ray telescope is largelydetermined by the point-spread function (PSF) and the photon-collection area of its mirrors, the same astelescopes in other wavelength bands. Since an X-ray telescope must be operated above the atmosphere inspace and that X-rays reflect only at grazing incidence, X-ray mirrors must be both lightweight and thin, bothof which add significant technical and engineering challenge to making an X-ray telescope. In this paper wereport our effort at NASA Goddard Space Flight Center (GSFC) of developing an approach to making an Xraymirror assembly that can be significantly better than the mirror assembly currently flying on the ChandraX-ray Observatory in each of the three aspects: PSF, effective area per unit mass, and production cost per uniteffective area. Our approach is based on the precision polishing of mono-crystalline silicon to fabricate thinand lightweight X-ray mirrors of the highest figure quality and micro-roughness, therefore, having thepotential of achieving diffraction-limited X-ray optics. When successfully developed, this approach will makeimplementable in the 2020s and 2030s many X-ray astronomical missions that are currently on the drawingboard, including sounding rocket flights such as OGRE, Explorer class missions such as STAR-X andFORCE, Probe class missions such as AXIS, TAP, and HEX-P, as well as large missions such as Lynx

Chromosomal-level reference genome of the moth Heortia vitessoides (Lepidoptera: Crambidae), a major pest of agarwood-producing trees

This is the final version. Available on open access from Elsevier via the DOI in this recordAvailability of data and materials: The final chromosome assembly was submitted to NCBI Assembly under accession number JACJUM000000000 in NCBI. The raw reads generated in this study have been deposited to the NCBI database under the BioProject accessions: PRJNA654728, the genome annotation files were deposited in the Figshare (https://doi.org/10.6084/m9.figshare.19633668). The microRNA sequences of known species were obtained from both miRbase [42] and MirGeneDB [21].The moth Heortia vitessoides Moore (Lepidoptera: Crambidae) is a major pest of ecologically, commercially and culturally important agarwood-producing trees in the genus Aquilaria. In particular, H. vitessoides is one of the most destructive defoliating pests of the incense tree Aquilaria sinesis, which produces a valuable fragrant wood used as incense and in traditional Chinese medicine [33]. Nevertheless, a genomic resource for H. vitessoides is lacking. Here, we present a chromosomal-level assembly for H. vitessoides, consisting of a 517 megabase (Mb) genome assembly with high physical contiguity (scaffold N50 of 18.2 Mb) and high completeness (97.9% complete BUSCO score). To aid gene annotation, 8 messenger RNA transcriptomes from different developmental stages were generated, and a total of 16,421 gene models were predicted. Expansion of gene families involved in xenobiotic metabolism and development were detected, including duplications of cytosolic sulfotransferase (SULT) genes shared among lepidopterans. In addition, small RNA sequencing of 5 developmental stages of H. vitessoides facilitated the identification of 85 lepidopteran conserved microRNAs, 94 lineage-specific microRNAs, as well as several microRNA clusters. A large proportion of the H. vitessoides genome consists of repeats, with a 29.12% total genomic contribution from transposable elements, of which long interspersed nuclear elements (LINEs) are the dominant component (17.41%). A sharp decrease in the genome-wide percentage of LINEs with lower levels of genetic distance to family consensus sequences suggests that LINE activity has peaked in H. vitessoides. In contrast, opposing patterns suggest a substantial recent increase in DNA and LTR element activity. Together with annotations of essential sesquiterpenoid hormonal pathways, neuropeptides, microRNAs and transposable elements, the high-quality genomic and transcriptomic resources we provide for the economically important moth H. vitessoides provide a platform for the development of genomic approaches to pest management, and contribute to addressing fundamental research questions in Lepidoptera.Hong Kong Research Grant Council Collaborative Research FundGeneral Research FundChinese University of Hong Kon

Protecting biodiversity in British Columbia: Recommendations for developing species at risk legislation

British Columbia has the greatest biological diversity of any province or territory in Canada. Yet increasing numbers of species in British Columbia are threatened with extinction. The current patchwork of provincial laws and regulations has not effectively prevented species declines. Recently, the Provincial Government has committed to enacting an endangered species law. Drawing upon our scientific and legal expertise, we offer recommendations for key features of endangered species legislation that build upon strengths and avoid weaknesses observed elsewhere. We recommend striking an independent Oversight Committee to provide recommendations about listing species, organize Recovery Teams, and monitor the efficacy of actions taken. Recovery Teams would evaluate and prioritize potential actions for individual species or groups of species that face common threats or live in a common area, based on best available evidence (including natural and social science and Indigenous Knowledge). Our recommendations focus on implementing an adaptive approach, with ongoing and transparent monitoring and reporting, to reduce delays between determining when a species is at risk and taking effective actions to save it. We urge lawmakers to include this strong evidentiary basis for species recovery as they tackle the scientific and socioeconomic challenges of building an effective species at risk Act

Protecting biodiversity in British Columbia: Recommendations for developing species at risk legislation

British Columbia has the greatest biological diversity of any province or territory in Canada. Yet increasing numbers of species in British Columbia are threatened with extinction. The current patchwork of provincial laws and regulations has not effectively prevented species declines. Recently, the Provincial Government has committed to enacting an endangered species law. Drawing upon our scientific and legal expertise, we offer recommendations for key features of endangered species legislation that build upon strengths and avoid weaknesses observed elsewhere. We recommend striking an independent Oversight Committee to provide recommendations about listing species, organize Recovery Teams, and monitor the efficacy of actions taken. Recovery Teams would evaluate and prioritize potential actions for individual species or groups of species that face common threats or live in a common area, based on best available evidence (including natural and social science and Indigenous Knowledge). Our recommendations focus on implementing an adaptive approach, with ongoing and transparent monitoring and reporting, to reduce delays between determining when a species is at risk and taking effective actions to save it. We urge lawmakers to include this strong evidentiary basis for species recovery as they tackle the scientific and socioeconomic challenges of building an effective species at risk Act

Aligning, Bonding, and Testing Mirrors for Lightweight X-ray Telescopes

High-resolution, high throughput optics for x-ray astronomy entails fabrication of well-formed mirror segments and their integration with arc-second precision. In this paper, we address issues of aligning and bonding thin glass mirrors with negligible additional distortion. Stability of the bonded mirrors and the curing of epoxy used in bonding them were tested extensively. We present results from tests of bonding mirrors onto experimental modules, and on the stability of the bonded mirrors tested in x-ray. These results demonstrate the fundamental validity of the methods used in integrating mirrors into telescope module, and reveal the areas for further investigation. The alignment and integration methods are applicable to the astronomical mission concept such as STAR-X, the Survey and Time-domain Astronomical Research Explorer