103 research outputs found

    Proxima Centauri b is not a transiting exoplanet

    Full text link
    We report Spitzer Space Telescope observations during predicted transits of the exoplanet Proxima Centauri b. As the nearest terrestrial habitable-zone planet we will ever discover, any potential transit of Proxima b would place strong constraints on its radius, bulk density, and atmosphere. Subsequent transmission spectroscopy and secondary-eclipse measurements could then probe the atmospheric chemistry, physical processes, and orbit, including a search for biosignatures. However, our photometric results rule out planetary transits at the 200~ppm level at 4.5 μm~{\mu}m, yielding a 3σ\sigma upper radius limit of 0.4~R_\rm{\oplus} (Earth radii). Previous claims of possible transits from optical ground- and space-based photometry were likely correlated noise in the data from Proxima Centauri's frequent flaring. Follow-up observations should focus on planetary radio emission, phase curves, and direct imaging. Our study indicates dramatically reduced stellar activity at near-to-mid infrared wavelengths, compared to the optical. Proxima b is an ideal target for space-based infrared telescopes, if their instruments can be configured to handle Proxima's brightness.Comment: 8 pages, 3 figures, 2 tables, accepted for publication in MNRA

    Latitudinal Asymmetry in the Dayside Atmosphere of WASP-43b

    Get PDF
    We present two-dimensional near-infrared temperature maps of the canonical hot Jupiter WASP-43b using a phase-curve observation with JWST NIRSpec/G395H. From the white-light planetary transit, we improve constraints on the planet’s orbital parameters and measure a planet-to-star radius ratio of 0.15883−0.00053+0.00056 . Using the white-light phase curve, we measure a longitude of maximum brightness of 6.9−0.°5+0.°5 east of the substellar point and a phase-curve offset of 10.0−0.°8+0.°8 . We also find a ≈4σ detection of a latitudinal hotspot offset of −13.4−1.°7+3.°2 , the first significant detection of a nonequatorial hotspot in an exoplanet atmosphere. We show that this detection is robust to variations within planetary parameter uncertainties, but only if the transit is used to improve constraints, showing the importance of transit observations to eclipse mapping. Maps retrieved from the NRS1 and NRS2 detectors are similar, with hotspot locations consistent between the two detectors at the 1σ level. Our JWST data show brighter (hotter) nightsides and a dimmer (colder) dayside at the shorter wavelengths relative to fits to Spitzer 3.6 and 4.5 μm phase curves. Through comparison between our phase curves and a set of general circulation models, we find evidence for clouds on the nightside and atmospheric drag or high metallicity reducing the eastward hotspot offset

    On-chain electrodynamics of metallic (TMTSF)_2 X salts: Observation of Tomonaga-Luttinger liquid response

    Full text link
    We have measured the electrodynamic response in the metallic state of three highly anisotropic conductors, (TMTSF)_2 X, where X=PF_6, AsF_6, or ClO_4, and TMTSF is the organic molecule tetramethyltetraselenofulvalene. In all three cases we find dramatic deviations from a simple Drude response. The optical conductivity has two features: a narrow mode at zero frequency, with a small spectral weight, and a mode centered around 200 cm^{-1}, with nearly all of the spectral weight expected for the relevant number of carriers and single particle bandmass. We argue that these features are characteristic of a nearly one-dimensional half- or quarter-filled band with Coulomb correlations, and evaluate the finite energy mode in terms of a one-dimensional Mott insulator. At high frequencies (\hbar\omega > t_\perp, the transfer integral perpendicular to the chains), the frequency dependence of the optical conductivity \sigma_1(\omega) is in agreement with calculations based on an interacting Tomonaga-Luttinger liquid, and is different from what is expected for an uncorrelated one-dimensional semiconductor. The zero frequency mode shows deviations from a simple Drude response, and can be adequately described with a frequency dependent mass and relaxation rate.Comment: 12 pages, 7 figures, RevTeX; minor corrections to text and references; To be published in Phys. Rev. B, 15 July 199

    Thermal Imaging of Nanostructures by Quantitative Optical Phase Analysis

    No full text
    International audienceWe introduce an optical microscopy technique aimed at characterizing the heat generation arising from nanostructures, in a comprehensive and quantitative manner. Namely, the technique permits (i) mapping the temperature distribution around the source of heat, (ii) mapping the heat power density delivered by the source, and (iii) retrieving the absolute absorption cross section of light-absorbing structures. The technique is based on the measure of the thermal-induced refractive index variation of the medium surrounding the source of heat. The measurement is achieved using an association of a regular CCD camera along with a modified Hartmann diffraction grating. Such a simple association makes this technique straightforward to implement on any conventional microscope with its native broadband illumination conditions. We illustrate this technique on gold nanoparticles illuminated at their plasmonic resonance. The spatial resolution of this technique is diffraction limited, and temperature variations weaker than 1 K can be detected

    Maskless Plasmonic Lithography at 22 nm Resolution

    Get PDF
    Optical imaging and photolithography promise broad applications in nano-electronics, metrologies, and single-molecule biology. Light diffraction however sets a fundamental limit on optical resolution, and it poses a critical challenge to the down-scaling of nano-scale manufacturing. Surface plasmons have been used to circumvent the diffraction limit as they have shorter wavelengths. However, this approach has a trade-off between resolution and energy efficiency that arises from the substantial momentum mismatch. Here we report a novel multi-stage scheme that is capable of efficiently compressing the optical energy at deep sub-wavelength scales through the progressive coupling of propagating surface plasmons (PSPs) and localized surface plasmons (LSPs). Combining this with airbearing surface technology, we demonstrate a plasmonic lithography with 22 nm half-pitch resolution at scanning speeds up to 10 m/s. This low-cost scheme has the potential of higher throughput than current photolithography, and it opens a new approach towards the next generation semiconductor manufacturing

    A broadband thermal emission spectrum of the ultra-hot Jupiter WASP-18b

    Get PDF
    Close-in giant exoplanets with temperatures greater than 2,000 K (''ultra-hot Jupiters'') have been the subject of extensive efforts to determine their atmospheric properties using thermal emission measurements from the Hubble and Spitzer Space Telescopes. However, previous studies have yielded inconsistent results because the small sizes of the spectral features and the limited information content of the data resulted in high sensitivity to the varying assumptions made in the treatment of instrument systematics and the atmospheric retrieval analysis. Here we present a dayside thermal emission spectrum of the ultra-hot Jupiter WASP-18b obtained with the NIRISS instrument on JWST. The data span 0.85 to 2.85 μ\mum in wavelength at an average resolving power of 400 and exhibit minimal systematics. The spectrum shows three water emission features (at >>6σ\sigma confidence) and evidence for optical opacity, possibly due to H^-, TiO, and VO (combined significance of 3.8σ\sigma). Models that fit the data require a thermal inversion, molecular dissociation as predicted by chemical equilibrium, a solar heavy element abundance (''metallicity'', M/H = 1.030.51+1.11_{-0.51}^{+1.11} ×\times solar), and a carbon-to-oxygen (C/O) ratio less than unity. The data also yield a dayside brightness temperature map, which shows a peak in temperature near the sub-stellar point that decreases steeply and symmetrically with longitude toward the terminators.Comment: JWST ERS bright star observations. Uploaded to inform JWST Cycle 2 proposals. Manuscript under review. 50 pages, 14 figures, 2 table

    Nightside clouds and disequilibrium chemistry on the hot Jupiter WASP-43b

    Get PDF
    Hot Jupiters are among the best-studied exoplanets, but it is still poorly understood how their chemical composition and cloud properties vary with longitude. Theoretical models predict that clouds may condense on the nightside and that molecular abundances can be driven out of equilibrium by zonal winds. Here we report a phase-resolved emission spectrum of the hot Jupiter WASP-43b measured from 5-12 μm with JWST's Mid-Infrared Instrument (MIRI). The spectra reveal a large day-night temperature contrast (with average brightness temperatures of 1524±35 and 863±23 Kelvin, respectively) and evidence for water absorption at all orbital phases. Comparisons with three-dimensional atmospheric models show that both the phase curve shape and emission spectra strongly suggest the presence of nightside clouds which become optically thick to thermal emission at pressures greater than ~100 mbar. The dayside is consistent with a cloudless atmosphere above the mid-infrared photosphere. Contrary to expectations from equilibrium chemistry but consistent with disequilibrium kinetics models, methane is not detected on the nightside (2σ upper limit of 1-6 parts per million, depending on model assumptions)
    corecore