Towards automatic setup of non intrusive appliance load monitoring – feature extraction and clustering

Given climate change concerns and incessantly increasing energy demands of the present time, improving energy efficiency becomes of significant environmental and economic impact. Monitoring household electrical consumption through a non-intrusive appliance load monitoring (NIALM) system achieves significant efficiency improvement by providing appliance-level energy consumption and relaying this information back to the user. This paper focuses on feature extraction and clustering, which constitute two of the four modules of the proposed automatic-setup NIALM system, the other two being labeling and classification. The feature extraction module applies the Estimation of Signal Parameters via Rotational Invariance Techniques (ESPRIT), a well-known parametric estimation technique, to the drawn electric current. The result is a compact representation of the signal in terms of complex numbers referred to as poles and residues. These complex numbers are then used to determine a feature vector consisting of the contribution of the fundamental, the third and the fifth harmonic currents to the maximum of the total load current. Once a signature is extracted, the clustering module applies distance-based rules inferred off-line from various databases and decides either to create a new class out of the new signature or to discard it and increase the count of an existing signature. As a result, the feature space is clustered without the a priori knowledge of the number of appliances into singleton clusters. Results obtained from a set of appliances indicate that these two modules succeed in creating an unlabeled database of signatures

Reliable Data Forwarding in Wireless Sensor Networks: Delay and Energy Trade Off

eliable Data Forwarding in Wireless Sensor Networks: Delay and Energy Trade Of

Determination of the Uncertainty Bounds of a Continuous Distillation Code: Effect of Input Variability and Model Uncertainty

AbstractIn this work, the effect of input variability and model uncertainty on the distillate composition of a continuous distillation tower is studied. To do that, we developed a stationary distillation code by combining mass and energy balance equations with a liquid-vapor equilibrium model and tray efficiency correlations. Feed and model uncertainties were modeled by using normal and uniform distributions respectively. A Monte Carlo propagation method was used to determine the upper and lower uncertainty margins of the distillate composition. The results of the application to a methanol-water distillation showed that the model uncertainty is as high as that of the feed variability. The information can be useful for the robust design of distillation towers

A generic non-stationary MIMO channel model for different high-speed train scenarios

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.This paper proposes a generic non-stationary wideband geometry-based stochastic model (GBSM) for multiple-input multiple-output (MIMO) high-speed train (HST) channels. The proposed generic model can be applied on the three most common HST scenarios, i.e., open space, viaduct, and cutting scenarios. A good agreement between the statistical properties of the proposed generic model and those of relevant measurement data from the aforementioned scenarios demonstrates the utility of the proposed channel model

Microwave Non‐Destructive Testing of Non‐Dispersive and Dispersive Media Using High‐Resolution Methods

This chapter discusses the principle and application of two model‐based algorithms for processing non‐dispersive and dispersive ground penetrating radar (GPR) data over layered medium under monostatic antenna configuration. Both algorithms have been selected for their super‐time resolution capability and reduced computational burden; they allow GPR to measure a layer thickness smaller than the fraction of the dominant wavelength. For non‐dispersive data, the ESPRIT algorithm is generalized to handle different kinds of data models encountered in experiments and in the literature. For dispersive data, the proposed adaptation of the MPM algorithm allows recovering the full‐time resolution and jointly estimating the time delays and quality factors of a layered medium with reduced bias. Both processing techniques are applied to probe‐layered roadways for NDT&E purposes

Global age-sex-specific mortality, life expectancy, and population estimates in 204 countries and territories and 811 subnational locations, 1950–2021, and the impact of the COVID-19 pandemic: a comprehensive demographic analysis for the Global Burden of Disease Study 2021

Background: Estimates of demographic metrics are crucial to assess levels and trends of population health outcomes. The profound impact of the COVID-19 pandemic on populations worldwide has underscored the need for timely estimates to understand this unprecedented event within the context of long-term population health trends. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 provides new demographic estimates for 204 countries and territories and 811 additional subnational locations from 1950 to 2021, with a particular emphasis on changes in mortality and life expectancy that occurred during the 2020–21 COVID-19 pandemic period. Methods: 22 223 data sources from vital registration, sample registration, surveys, censuses, and other sources were used to estimate mortality, with a subset of these sources used exclusively to estimate excess mortality due to the COVID-19 pandemic. 2026 data sources were used for population estimation. Additional sources were used to estimate migration; the effects of the HIV epidemic; and demographic discontinuities due to conflicts, famines, natural disasters, and pandemics, which are used as inputs for estimating mortality and population. Spatiotemporal Gaussian process regression (ST-GPR) was used to generate under-5 mortality rates, which synthesised 30 763 location-years of vital registration and sample registration data, 1365 surveys and censuses, and 80 other sources. ST-GPR was also used to estimate adult mortality (between ages 15 and 59 years) based on information from 31 642 location-years of vital registration and sample registration data, 355 surveys and censuses, and 24 other sources. Estimates of child and adult mortality rates were then used to generate life tables with a relational model life table system. For countries with large HIV epidemics, life tables were adjusted using independent estimates of HIV-specific mortality generated via an epidemiological analysis of HIV prevalence surveys, antenatal clinic serosurveillance, and other data sources. Excess mortality due to the COVID-19 pandemic in 2020 and 2021 was determined by subtracting observed all-cause mortality (adjusted for late registration and mortality anomalies) from the mortality expected in the absence of the pandemic. Expected mortality was calculated based on historical trends using an ensemble of models. In location-years where all-cause mortality data were unavailable, we estimated excess mortality rates using a regression model with covariates pertaining to the pandemic. Population size was computed using a Bayesian hierarchical cohort component model. Life expectancy was calculated using age-specific mortality rates and standard demographic methods. Uncertainty intervals (UIs) were calculated for every metric using the 25th and 975th ordered values from a 1000-draw posterior distribution. Findings: Global all-cause mortality followed two distinct patterns over the study period: age-standardised mortality rates declined between 1950 and 2019 (a 62·8% [95% UI 60·5–65·1] decline), and increased during the COVID-19 pandemic period (2020–21; 5·1% [0·9–9·6] increase). In contrast with the overall reverse in mortality trends during the pandemic period, child mortality continued to decline, with 4·66 million (3·98–5·50) global deaths in children younger than 5 years in 2021 compared with 5·21 million (4·50–6·01) in 2019. An estimated 131 million (126–137) people died globally from all causes in 2020 and 2021 combined, of which 15·9 million (14·7–17·2) were due to the COVID-19 pandemic (measured by excess mortality, which includes deaths directly due to SARS-CoV-2 infection and those indirectly due to other social, economic, or behavioural changes associated with the pandemic). Excess mortality rates exceeded 150 deaths per 100 000 population during at least one year of the pandemic in 80 countries and territories, whereas 20 nations had a negative excess mortality rate in 2020 or 2021, indicating that all-cause mortality in these countries was lower during the pandemic than expected based on historical trends. Between 1950 and 2021, global life expectancy at birth increased by 22·7 years (20·8–24·8), from 49·0 years (46·7–51·3) to 71·7 years (70·9–72·5). Global life expectancy at birth declined by 1·6 years (1·0–2·2) between 2019 and 2021, reversing historical trends. An increase in life expectancy was only observed in 32 (15·7%) of 204 countries and territories between 2019 and 2021. The global population reached 7·89 billion (7·67–8·13) people in 2021, by which time 56 of 204 countries and territories had peaked and subsequently populations have declined. The largest proportion of population growth between 2020 and 2021 was in sub-Saharan Africa (39·5% [28·4–52·7]) and south Asia (26·3% [9·0–44·7]). From 2000 to 2021, the ratio of the population aged 65 years and older to the population aged younger than 15 years increased in 188 (92·2%) of 204 nations. Interpretation: Global adult mortality rates markedly increased during the COVID-19 pandemic in 2020 and 2021, reversing past decreasing trends, while child mortality rates continued to decline, albeit more slowly than in earlier years. Although COVID-19 had a substantial impact on many demographic indicators during the first 2 years of the pandemic, overall global health progress over the 72 years evaluated has been profound, with considerable improvements in mortality and life expectancy. Additionally, we observed a deceleration of global population growth since 2017, despite steady or increasing growth in lower-income countries, combined with a continued global shift of population age structures towards older ages. These demographic changes will likely present future challenges to health systems, economies, and societies. The comprehensive demographic estimates reported here will enable researchers, policy makers, health practitioners, and other key stakeholders to better understand and address the profound changes that have occurred in the global health landscape following the first 2 years of the COVID-19 pandemic, and longer-term trends beyond the pandemic

Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BACKGROUND Regular, detailed reporting on population health by underlying cause of death is fundamental for public health decision making. Cause-specific estimates of mortality and the subsequent effects on life expectancy worldwide are valuable metrics to gauge progress in reducing mortality rates. These estimates are particularly important following large-scale mortality spikes, such as the COVID-19 pandemic. When systematically analysed, mortality rates and life expectancy allow comparisons of the consequences of causes of death globally and over time, providing a nuanced understanding of the effect of these causes on global populations. METHODS The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 cause-of-death analysis estimated mortality and years of life lost (YLLs) from 288 causes of death by age-sex-location-year in 204 countries and territories and 811 subnational locations for each year from 1990 until 2021. The analysis used 56 604 data sources, including data from vital registration and verbal autopsy as well as surveys, censuses, surveillance systems, and cancer registries, among others. As with previous GBD rounds, cause-specific death rates for most causes were estimated using the Cause of Death Ensemble model-a modelling tool developed for GBD to assess the out-of-sample predictive validity of different statistical models and covariate permutations and combine those results to produce cause-specific mortality estimates-with alternative strategies adapted to model causes with insufficient data, substantial changes in reporting over the study period, or unusual epidemiology. YLLs were computed as the product of the number of deaths for each cause-age-sex-location-year and the standard life expectancy at each age. As part of the modelling process, uncertainty intervals (UIs) were generated using the 2·5th and 97·5th percentiles from a 1000-draw distribution for each metric. We decomposed life expectancy by cause of death, location, and year to show cause-specific effects on life expectancy from 1990 to 2021. We also used the coefficient of variation and the fraction of population affected by 90% of deaths to highlight concentrations of mortality. Findings are reported in counts and age-standardised rates. Methodological improvements for cause-of-death estimates in GBD 2021 include the expansion of under-5-years age group to include four new age groups, enhanced methods to account for stochastic variation of sparse data, and the inclusion of COVID-19 and other pandemic-related mortality-which includes excess mortality associated with the pandemic, excluding COVID-19, lower respiratory infections, measles, malaria, and pertussis. For this analysis, 199 new country-years of vital registration cause-of-death data, 5 country-years of surveillance data, 21 country-years of verbal autopsy data, and 94 country-years of other data types were added to those used in previous GBD rounds. FINDINGS The leading causes of age-standardised deaths globally were the same in 2019 as they were in 1990; in descending order, these were, ischaemic heart disease, stroke, chronic obstructive pulmonary disease, and lower respiratory infections. In 2021, however, COVID-19 replaced stroke as the second-leading age-standardised cause of death, with 94·0 deaths (95% UI 89·2-100·0) per 100 000 population. The COVID-19 pandemic shifted the rankings of the leading five causes, lowering stroke to the third-leading and chronic obstructive pulmonary disease to the fourth-leading position. In 2021, the highest age-standardised death rates from COVID-19 occurred in sub-Saharan Africa (271·0 deaths [250·1-290·7] per 100 000 population) and Latin America and the Caribbean (195·4 deaths [182·1-211·4] per 100 000 population). The lowest age-standardised death rates from COVID-19 were in the high-income super-region (48·1 deaths [47·4-48·8] per 100 000 population) and southeast Asia, east Asia, and Oceania (23·2 deaths [16·3-37·2] per 100 000 population). Globally, life expectancy steadily improved between 1990 and 2019 for 18 of the 22 investigated causes. Decomposition of global and regional life expectancy showed the positive effect that reductions in deaths from enteric infections, lower respiratory infections, stroke, and neonatal deaths, among others have contributed to improved survival over the study period. However, a net reduction of 1·6 years occurred in global life expectancy between 2019 and 2021, primarily due to increased death rates from COVID-19 and other pandemic-related mortality. Life expectancy was highly variable between super-regions over the study period, with southeast Asia, east Asia, and Oceania gaining 8·3 years (6·7-9·9) overall, while having the smallest reduction in life expectancy due to COVID-19 (0·4 years). The largest reduction in life expectancy due to COVID-19 occurred in Latin America and the Caribbean (3·6 years). Additionally, 53 of the 288 causes of death were highly concentrated in locations with less than 50% of the global population as of 2021, and these causes of death became progressively more concentrated since 1990, when only 44 causes showed this pattern. The concentration phenomenon is discussed heuristically with respect to enteric and lower respiratory infections, malaria, HIV/AIDS, neonatal disorders, tuberculosis, and measles. INTERPRETATION Long-standing gains in life expectancy and reductions in many of the leading causes of death have been disrupted by the COVID-19 pandemic, the adverse effects of which were spread unevenly among populations. Despite the pandemic, there has been continued progress in combatting several notable causes of death, leading to improved global life expectancy over the study period. Each of the seven GBD super-regions showed an overall improvement from 1990 and 2021, obscuring the negative effect in the years of the pandemic. Additionally, our findings regarding regional variation in causes of death driving increases in life expectancy hold clear policy utility. Analyses of shifting mortality trends reveal that several causes, once widespread globally, are now increasingly concentrated geographically. These changes in mortality concentration, alongside further investigation of changing risks, interventions, and relevant policy, present an important opportunity to deepen our understanding of mortality-reduction strategies. Examining patterns in mortality concentration might reveal areas where successful public health interventions have been implemented. Translating these successes to locations where certain causes of death remain entrenched can inform policies that work to improve life expectancy for people everywhere. FUNDING Bill & Melinda Gates Foundation

Méthodes d'estimation paramétriques appliquées à la caractérisation de milieux dispersifs du génie civil

-Dans le domaine du génie civil, les méthodes à haute résolution sont généralement utilisées pour estimer les paramètres d'un milieu non dispersif, en offrant la possibilité d'améliorer la résolution temporelle dans une bande de fréquences limitée. L'objectif de cette thèse est d'étendre l'application de ces méthodes à la caractérisation des milieux absorbants et dispersifs. Dans un premier temps, le modèle à Q constant est adopté pour tenir compte de la dispersion et de l'absorption du milieu. Ce modèle satisfait les contraintes de causalité et d'indépendance fréquentielle du facteur de qualité Q. Dans un second temps, une étude de sensibilité permet de quantifier la dégradation de performance des méthodes d'estimation conventionnelles dans un milieu dispersif. On explique en outre l'origine de la surestimation du rang de la matrice de données. Les résultats de simulations montrent une sévère dégradation des performances avec la largeur de bande. Dans un troisième temps, la méthode de faisceau de matrices (Matrix Pencil Method) est étendue à la large bande pour l'estimation conjointe des retards de propagation et du facteur de qualité. La solution algorithmique proposée s'appuie sur deux théorèmes qui imposent comme solution, de disposer d'échantillons fréquentiels non uniformes. Les algorithmes proposés consistent à interpoler soit, la série de données par la technique de spline (algorithmes IB-MPM et RAP-MPM), soit la matrice mode (algorithmes 2D-MPM et RUN-MPM). Les résultats obtenus illustrent les capacités large bande des algorithmes développés. Enfin, les algorithmes sont validés à partir de mesures de permittivité de bétons hydrauliques et de sols limoneux

Prototype implementation and experimental analysis of water heating using recovered waste heat of chimneys

This work discusses a waste heat recovery system (WHRS) applied to chimneys for heating water in residential buildings. A prototype illustrating the suggested system is implemented and tested. Different waste heat scenarios by varying the quantity of burned firewood (heat input) are experimented. The temperature at different parts of the WHRS and the gas flow rates of the exhaust pipes are measured. Measurements showed that the temperature of 95 L tank of water can be increased by 68 °C within one hour. Obtained results show that the convection and radiation exchanges at the bottom surface of the tank have a considerable impact on the total heat transfer rate of the water (as high as 70%)