211 research outputs found
Portal vein thrombosis may alter the correct evaluation of hepatocellular carcinoma with the sonographic contrast pulse sequence technique
[No abstract available
New value from food and industrial wastes - bioaccumulation of omega-3 fatty acids from an oleaginous microbial biomass paired with a brewery by-product using black soldier fly (Hermetia illucens) larvae.
Research on bioconversion based on insects is intensifying as it addresses the problem of reducing and reusing
food and industrial waste. To reach this goal, we need to find more means of pairing waste to insects. With this
goal, brewers\u2019 spent grains (BSG) - a food waste of the brewing industry - paired with the oleaginous biomass of
the thraustochytrid Schizochytrium limacinum cultivated on crude glycerol - a major waste of biodiesel production
- were successfully used to grow Hermetia illucens larvae. Combining BSG and S. limacinum in the diet in an
attempt to design the lipid profile of H. illucens larvae to contain a higher percentage of omega-3 fatty acids is
novel. Insect larvae were grown on three different substrates: i) standard diet for Diptera (SD), ii) BSG, and iii) BSG + 10% S. limacinum biomass. The larvae and substrates were analyzed for fatty acid composition and larval growth was measured until 25% of insects reached the prepupal stage. Our data showed that including omega-3-rich S. limacinum biomass in the BSG substrate promoted an increase in larval weight compared to larvae fed on SD or BSG substrates. Furthermore, it was possible, albeit in a limited way, to incorporate omega-3 fatty acids, principally docosahexaenoic acid (DHA) from BSG + S. limacinum substrate containing 20% of DHA into the larval fat (7% DHA). However, H. illucens with this level of DHA may not be suitable if the aim is to get larvae with high omega-3 lipids to feed carnivorous fish
Evidence of resonant surface wave excitation in the relativistic regime through measurements of proton acceleration from grating targets
The interaction of laser pulses with thin grating targets, having a periodic
groove at the irradiated surface, has been experimentally investigated.
Ultrahigh contrast () pulses allowed to demonstrate an enhanced
laser-target coupling for the first time in the relativistic regime of
ultra-high intensity >10^{19} \mbox{W/cm}^{2}. A maximum increase by a factor
of 2.5 of the cut-off energy of protons produced by Target Normal Sheath
Acceleration has been observed with respect to plane targets, around the
incidence angle expected for resonant excitation of surface waves. A
significant enhancement is also observed for small angles of incidence, out of
resonance.Comment: 5 pages, 5 figures, 2nd version implements final correction
Iron and Nickel spectral opacity calculations in conditions relevant for pulsating stellar envelopes and experiments
Seismology of stars is strongly developing. To address this question we have
formed an international collaboration OPAC to perform specific experimental
measurements, compare opacity calculations and improve the opacity calculations
in the stellar codes [1]. We consider the following opacity codes: SCO,
CASSANDRA, STA, OPAS, LEDCOP, OP, SCO-RCG. Their comparison has shown large
differences for Fe and Ni in equivalent conditions of envelopes of type II
supernova precursors, temperatures between 15 and 40 eV and densities of a few
mg/cm3 [2, 3, 4]. LEDCOP, OPAS, SCO-RCG structure codes and STA give similar
results and differ from OP ones for the lower temperatures and for spectral
interval values [3]. In this work we discuss the role of Configuration
Interaction (CI) and the influence of the number of used configurations. We
present and include in the opacity code comparisons new HULLAC-v9 calculations
[5, 6] that include full CI. To illustrate the importance of this effect we
compare different CI approximations (modes) available in HULLAC-v9 [7]. These
results are compared to previous predictions and to experimental data.
Differences with OP results are discussed.Comment: 4 pages, 3 figures, conference Inertial Fusion Sciences and
Applications, Bordeaux, 12th to 16th September 2011; EPJ web of Conferences
201
Theory of laser ion acceleration from a foil target of nanometers
A theory for laser ion acceleration is presented to evaluate the maximum ion
energy in the interaction of ultrahigh contrast (UHC) intense laser with a
nanometer-scale foil. In this regime the energy of ions may be directly related
to the laser intensity and subsequent electron dynamics. This leads to a simple
analytical expression for the ion energy gain under the laser irradiation of
thin targets. Significantly, higher energies for thin targets than for thicker
targets are predicted. Theory is concretized to the details of recent
experiments which may find its way to compare with these results.Comment: 22 pages 7 figures. will be submitted to NJ
Measurement of XUV-absorption spectra of ZnS radiatively heated foils
Time-resolved absorption of zinc sulfide (ZnS) and aluminum in the XUV-range
has been measured. Thin foils in conditions close to local thermodynamic
equilibrium were heated by radiation from laser-irradiated gold spherical
cavities. Analysis of the aluminum foil radiative hydrodynamic expansion, based
on the detailed atomic calculations of its absorption spectra, showed that the
cavity emitted flux that heated the absorption foils corresponds to a radiation
temperature in the range 55 60 eV. Comparison of the ZnS absorption spectra
with calculations based on a superconfiguration approach identified the
presence of species Zn6+ - Zn8+ and S5+ - S6+. Based on the validation of the
radiative source simulations, experimental spectra were then compared to
calculations performed by post-processing the radiative hydrodynamic
simulations of ZnS. Satisfying agreement is found when temperature gradients
are accounted for
Composite Wood–Concrete Structural Floor System with Horizontal Connectors
The concept of horizontal shear connection utilization on wood–concrete beams intends to be an alternative connection detail for composite wood–concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood–concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood–concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood–concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon. © 2014, The Author(s)
Non-adiabatic cluster expansion after ultrashort laser interaction
AbstractWe used X-ray spectroscopy as a diagnostic tool for investigating the properties of laser-cluster interactions at the stage in which non-adiabatic cluster expansion takes place and a quasi-homogeneous plasma is produced. The experiment was carried out with a 10 TW, 65 fs Ti:Sa laser focused on CO2 cluster jets. The effect of different laser-pulse contrast ratios and cluster concentrations was investigated. The X-ray emission associated to the Rydberg transitions allowed us to retrieve, through the density and temperature of the emitting plasma, the time after the beginning of the interaction at which the emission occurred. The comparison of this value with the estimated time for the "homogeneous" plasma formation shows that the degree of adiabaticity depends on both the cluster concentration and the pulse contrast. Interferometric measurements support the X-ray data concerning the plasma electron density
- …